100W Deep Bass Mono Amplifier Board // HW-576 // TPA3116 D2 Digital Class-D

Sdílet
Vložit
  • čas přidán 30. 03. 2024
  • #HW_576 #tpa3116d2 #creativedipu
    100W Deep Bass Mono Amplifier Board // HW-576 // TPA3116 D2 Digital Class-D
    100W Deep Bass Mono Amplifier Board // HW-576 // TPA3116 D2 Digital Class-D
    Link:
    Tpa3116D2 Mono : amzn.to/4cBjqVw
    Tpa3116 D2 Stereo : amzn.to/3xinv0G
    Tpa3118 mono 60W : amzn.to/3vyddZF
    amzn.to/3vCa6jx
    Dosto ye hamara naya channel hain is channel main regular video upload hota rahega is channel main aplogo ko milaga Electrical ka bahut sare cheez banana ka tarika and Repair[How to make]
    Soldering Iron: amzn.to/40GWBsd
    My Multimeter: amzn.to/3HmcQEm
    Microphone: amzn.to/3Nk1B39
    Tripod: amzn.to/3VeyKPn
    o How to install volume control in amplifie: • How to install volume ...
    o How to make color light at home: • How to make color ligh...
    o 3.7v battery charger circuit with auto cut off: • 3.7v battery charger c...
    o How To Make Remote Control On and Off Switch: • How To Make Remote Con...
    o 5v audio board and other 2 board connection: • 5v audio board and oth...
    Instagram: / creativedipu
    CREATIVE DIPU CZcams Channel: / @creativedipu
    (((For Sponsorship & Business Enquiries : - dipumondal8918@gmail.com)))
    Dosto ager mara Video achha laga to
    LIKE
    COMMENTS
    SUBSCRIBE
  • Věda a technologie

Komentáře • 24

  • @electroghost6695
    @electroghost6695 Před 23 dny +1

    24v 3amp main Achcha chalega

  • @MoHARISH-zz6dd
    @MoHARISH-zz6dd Před 3 měsíci +2

    Bhai dono ka comparison karo

  • @AkashDebnath-lv8bh
    @AkashDebnath-lv8bh Před měsícem +1

    12v 4amp use kar sakta hu

  • @ArPiT0198
    @ArPiT0198 Před měsícem

    Mere pass 24v 15amp ka SMPS already hai usse khrab ho Sakta kya board, please help?

  • @maitysantana6908
    @maitysantana6908 Před měsícem

    kya main ek 8inch 60 watt and 4inch 20 watt paralal me connect kar sakta hoon?

  • @golupopular9935
    @golupopular9935 Před 3 měsíci

    Mere paas 3116d2 hai to 50+50 me kon sa mid speaker lagaye

  • @golupopular9935
    @golupopular9935 Před 3 měsíci +1

    1 video speaker ke corn pe banao kon sa corn speaker kahn use karna best hoga or kon sa corn speaker achha hota hai

  • @lnsonilnsoni162
    @lnsonilnsoni162 Před 3 měsíci

    5209 top no 1 है
    बस ओरिजनल होना चाहिये

  • @SANJAYGUPTA-wt1vt
    @SANJAYGUPTA-wt1vt Před 3 měsíci +2

    Best sound and best bass amplifier kaun sa hai Ghar ke liye

  • @shibuguha3220
    @shibuguha3220 Před 3 měsíci +1

    19volt main full put nehi karega...24v 4.5amp main full put karega😊

  • @Lokendarharshana-zl7ux
    @Lokendarharshana-zl7ux Před 3 měsíci +2

    Tpa3116d2 ma 24v 4 amper output best ha or esma 2 ohm ka speaker 🔊 lagana chahiye tab jaker 100 watt output karaga or esma 6 inch sa 12 inch ka speaker 🔊 chala sakte hai video ma rong information da raha hai ya he don't have information about tpa3116d2 mono board 😞😞😞😞

    • @creativedipu
      @creativedipu  Před 3 měsíci

      You are also right ,But My Maximum audio Info get From Ic Data-sheet ,That's why always time i Want To Give Right Information,If i say something wrong then i am so sorry,But for This audio board my recommended Voltage 20V And 5A = 100W, And Speaker 6"- 10" ,digital-amplifier power stages for driving speakers up to 100 W into 2 ohm in mono.

    • @GabrielAlbuquerqueheck
      @GabrielAlbuquerqueheck Před 3 měsíci

      It's very good to base yourself on the datasheet. I will add important information here:
      Regarding the 2Ohms impedance, I saw on another channel that tested it in this load and it didn't work well at all, the output filters and the diodes at the VCC input don't handle the load well (distorts). At least 70W with VCC of 26.7V at 4Ohms you can do it, maybe with 30.7V you can get 100W. (Yes, the chip supports a maximum operation of 30V, in PBTL mode it should be safe), the additional 0.7V: the diode voltage drop is generally in this range. You may need to remove the diodes and connect directly (as long as you don't invert the VCC polarity...).
      One thing, if you are going to use the board to deliver 60W, it is better to choose the 60W mono TPA3118, which is cheaper and will offer basically the same quality.
      Alias: 24.7V 4Ohms = 60W.
      About the power supply: 60-70W with 3A is already OK, try 100W with 5A.
      I hope I helped, if I'm wrong, please correct me.

  • @deepsrai779
    @deepsrai779 Před měsícem

    60 wat hai not 100 wat

  • @Lokestech
    @Lokestech Před 13 dny

    Sound quality not good

  • @haimantipramanik2963
    @haimantipramanik2963 Před 2 měsíci

    😮

  • @lnsonilnsoni162
    @lnsonilnsoni162 Před 3 měsíci

    बेकार है ये

  • @hellojjjjfff123
    @hellojjjjfff123 Před 3 měsíci

    Fake ic

  • @MoHARISH-zz6dd
    @MoHARISH-zz6dd Před 3 měsíci +2

    Bhai dono ka comparison karo