SoClean 3 Setup and Demo

Sdílet
Vložit
  • čas přidán 27. 08. 2024
  • This tutorial will give you a great start setting up and running your new SoClean 3 CPAP sanitizer. From unpacking to hooking it up and running it. For more information about SoClean 3 or parts, use the link below.
    SoClean 3 Details:
    cpapmyway.com/...

Komentáře • 39

  • @kathleenwassum7712
    @kathleenwassum7712 Před 5 měsíci

    Thank you so much! This was very informative to this 73 year old Lady!❤

  • @dianarice5980
    @dianarice5980 Před 3 měsíci +1

    Great presentation. I would appreciate comments comparing the SoClean 3 to the 2. Mention the 3 does not cycle through the Cpap water reservoir, plus it is more labor intensive in that with the 2 you put items in the unit without having to disconnect the hose. I think I'm going to miss my SoClean2, which gave me 9 years of service. The 3 is also wider, so bummer with my small night table.

  • @kateebee130
    @kateebee130 Před 4 měsíci

    Thanks so much! I was wondering why it wouldn't start. I had overlooked the one time activation! The old brain doesn't function like it used to!😂

  • @Steppinstars
    @Steppinstars Před 5 měsíci

    That so very helpful. thank you, sir.

  • @arlenem9697
    @arlenem9697 Před 5 měsíci +1

    The SoClean 3, you now have to disconnect and then reconnect the tubing from the reservoir every time the SoClean 3 is used. The 3 also takes up more space on my nightstand. I dont have to do this disconnect/reconnect my SoClean2. So, what is the advantage of upgrading to a SoClean3? I already have a usb connection on my wall outlet.

    • @CPAPmyway
      @CPAPmyway  Před 5 měsíci

      I am not sure that I would advise you to upgrade unless you like the feature of not having the adapter connected to your CPAP machine.

    • @cristymeadows7593
      @cristymeadows7593 Před 4 měsíci

      I’m wondering if this is to prevent the companies from invalidating the warranty on the machines. I was told not to use a SoClean device because of potential harm to the motor. The 3 would take care of that issue because it’s only running through mask and tube.

  • @Sweet_Jazz
    @Sweet_Jazz Před měsícem

    Surprised to see that the ozone hose no longer connects to the CPAP machine. I have a ResMed 10 with water reservoir. Disconnecting the hose is an inconvenience now since my hose connection is fairly tight. CORRECTION. Connecting to the ResMed 10 is the same as with the SoClean 2 with the ozone hose connecting to the water bath. The filter check valve is not necessary.

  • @rebelrailroader
    @rebelrailroader Před měsícem

    Connectors don't work with my machine. They aren't they same style connection I have for my heated tube.

  • @sppwrites
    @sppwrites Před 6 měsíci

    What about sanitizing the reservoir also? Doesn't that need to be done too? Will this need a repeat operation and another hour & 15 minutes? Thanks

    • @CPAPmyway
      @CPAPmyway  Před 5 měsíci

      This is not geared to handle the reservoir. You might can make it happen, but it is not set up for that.

  • @lindathiessen7225
    @lindathiessen7225 Před 2 měsíci

    What if you want to interrupt the cycle. I mistakenly restarted when I wanted to open it.

    • @CPAPmyway
      @CPAPmyway  Před 2 měsíci

      It has to run through a cancellation cycle I believe.

  • @johnmahaffey8878
    @johnmahaffey8878 Před 4 měsíci

    Can I just connect it to the resmed machine like the So Clean 2? I would like to clean the reservoir as well

  • @juanitabarnett8232
    @juanitabarnett8232 Před 5 měsíci

    You might mention too that the unit has a phone charger built into the back?

    • @CPAPmyway
      @CPAPmyway  Před 5 měsíci

      Yes the USB port is a nice feature on there.

  • @marilyny.bennett5830
    @marilyny.bennett5830 Před 5 měsíci

    What about the basin that holds the distilled water? Can you place that in there also?

  • @gmctruck2010
    @gmctruck2010 Před 4 měsíci

    Can i just empty my water reservoir and put it inside the so clean 3 to clean it?

    • @CPAPmyway
      @CPAPmyway  Před 3 měsíci

      It will most likely not fit.

  • @marilyny.bennett5830
    @marilyny.bennett5830 Před 5 měsíci

    I saw your answer for the reservoir. How do you clean the reservoir? By hand?

  • @Blackattack7958
    @Blackattack7958 Před 6 měsíci

    Is there a way someone could make a filter for a bpap that has a menthol smell to it that helps support breathing and of coarse the smell in the air. When I go to bed. Everything is clean. The air quality is great in my room due to having a dyson air purifier machine. But the smell through my mask while wearing it smells so bad. So I wash it constantly or just replace the hose or mask but after the first night after washed or replaced then it smells again. So I thought well maybe if that made a filter that is odor fighting and different menthol smells just as original or cherry menthol or orange menthol. Not only making the smell that the air passes from the air through the filter better but still performing just as good as a current filter.

    • @Blackattack7958
      @Blackattack7958 Před 6 měsíci

      Or maybe even putting drops in the distilled water that is menthol that helps with breathing and smell

    • @CPAPmyway
      @CPAPmyway  Před 6 měsíci

      That is a very interesting thought.

  • @christineoberlin1440
    @christineoberlin1440 Před 4 měsíci

    is the so clean compatible with Res Med 11 ?

  • @R0M8N
    @R0M8N Před 6 měsíci

    UVC light vs Ozon which one is better?

    • @CPAPmyway
      @CPAPmyway  Před 6 měsíci

      I need to do a video on that for a deep dive, but it is really up to you. Both have pros and cons. I need to expand on that soon.

  • @universal3024
    @universal3024 Před 3 měsíci

    So noisy ..