Excellent piece of equipment got it 1 week ago changed my Life 100% I Scored 37 events per hour on the test monitor, now I’m 1.2 events per hour, very quite machine, comfortable full mask will never stop using it . CHANGED MY LIFE!!!!! 👍🏼
@@billrau2398 I'm in the same boat! Went from 42 events per hour to 1.2 according to the machine. I'm a little skeptical of how it tracks the events but my wife said I'm not snoring anymore so i know it's doing something!
@@calicryptodude-mel6033😖90 events for me Definitely a life changer. Upgrading my old 5 year old machine tomorrow 😂I wasn’t aware than I can upgrade every two years
My wife has been using a CPAP for several years. She got a ResMed AirSense 11 right after they first came out. We never new about removing and cleaning the hose port. Thanks for sharing this. She can now clean her machine more completely!
Honestly, I'm tired and can't sleep due to the intense and ongoing pain of 4 broken ribs. I have this cpap but turned on this video thinking it would be just what I need to put me to sleep 😂 What a nice surprise when it was actually interesting and I learned a lot about my machine's use and maintenance! This foreign machine has now become familiar and cleaning is no longer a daunting task. So, while I watched this thinking I'd fall asleep, I watched it all the way through and I'm now going to sleep with a feeling of relief and confidence in caring for this contraption. Thank You so much!
Thanks for your video. I learned a lot. It is a really great video. I was wondering if you would do a video on the entire cleaning part of all the relevant parts to clean (demonstration) like the tubes,etc. It would be great if the entire complete setup ( pillows, tubes,etc.) were taken apart,cleaned, then the video showing all the parts being put back in the machine (obviously you'll need an extra set of parts because the parts cleaned would be wet ;) I'm visual and that would be so helpful. Thanks again for your video!
I’ve been using an old ResMed machine since 2011, and finally decided to get another newer machine. I like this new 11 model. The water tank makes for a messier fill, as my old machine just had a hole in the top to pour the water. This new 11 tank makes you lift off the cover, pour, cover and slide in. I still haven’t done it yet without spilling water!
Thank you for all the good and bad comments on the video. This is my first time using this cpap. Mine was old and finally stopped working. Will be trying this tonight. Great video and God bless you.
Had mine for about a month now and recently have experienced extreme nasal drip. Have been cleaning mask daily and hose weekly. Until this video I didn't know to empty humidifier daily and to clean humidifier and hose attachment weekly. Hopefully this new knowledge, I will get over my nasal issues.
This machine is terrific! We are new to this therapy and started with a Luna machine that, because of noise, provided LESS sleep (for both of us, me, the wife, and my husband, the user) than severe APNEA. UGH! We were changed over to this machine and noise is GONE. So happy. Still getting used to the masks, we've literally tried everything available and so far it looks like the ResMed Airtouch F20 is the only one we can work with. Getting a fit that doesn't leak AND is comfortable throughout multiple sleeping positions and for longer than 3-4 hours at a time is our remaining challenge. Thanks so much for all of your work, reviews and "mini-lessons". CPAPmyway is fantastic! Cheers
I had tried sleep therapy with a cpap 6 years ago and I could not get used to it. The machine I got back then was noisey, the air pressure was not comfortable at all. Hence I stopped the treatment. Now I started the treatment up again and I got this cpap unit by Resmed and I must say it's a game changer. I love it. It is super quiet, the air pressure set is on auto and it gives me what I need when I need it. It has an app that shows your sleep results each morning and it has been easy to set up and use. I absolutely love this unit.
Excellent review. Received my ResMed 11 from the VA (Veterans Admin) and it's a Cadillac compared to my sysone issued in 2011. The quietness of the CPAP machine shocked me. So happy to retire my Darth Vader noisy air machine.
Thank you for this! My doctor just prescribed me with this unit and I was hoping to find an "all about" video before I got it so I knew what to expect. You nailed everything I needed to know and more :) Thanks again!
Thanks for this video! I’m so happy! I just got one of these today! My first CPAP machine. I can’t wait to use it tonight! Looking forward to a full nights’ sleep! No more total exhaustion all day long!
I got my first-ever CPAP machine today and this video was extremely helpful. I really appreciate how thorough the video was, I was kinda lost. Looking for the next video on the controls.
I just received my Resmed 11 about a month ago, so far so good! It's a replacement for my broken Dreamstation that was recalled! So far I love it light weight very easy to use & very quiet! Thank you for your helpful information! Take care & God Bless🙏❤🕊✝
For some reason, I got it this time! Video was very helpful and clear. Never realized the universal fit for the SoClean2. Now I can continue using with my new ResMed which uses a different water reservoir. Thanks.
I've been using an S9 for years and I am going to be getting one of these. This video was very helpful. I haven't even received the machine yet and I'm thinking of ordering those replacement filter covers lol Seriously though thank you for posting this
Thanks for watching and you are welcome. We have a few left in stock at this moment if you are looking to get one soon. Link Below cpapmyway.com/store/cpap-machines/auto-cpap-machines/airsense-11-auto-cpap
Ive been using this machine since mid April. First time c-pap user. Im definitely getting more sleep. Your video was very good. I learned a lot from it. Especially interesting to me was the cleaning information was different from what the service rep told me. I was told to just add water as needed, empty the chamber and clean it once a week and start with new water than. Also was never told about the piece to take out of the machine to clean. Do you recommend filtered water or can tap water be used? Really appreciate all the information.
Just ordered this and the F30i mask, should be here Thursday. It'll be my first time starting CPAP therapy. Looking forward to it and hoping it's not too rough of a start!
Awesome! Good Luck! We have a nice mask selections blog that might be worth a read. Link below. Reach out if you bump in to any questions. cpapmyway.com/blog/best-cpap-mask-current-and-new-users
New to CPAP therapy so the ResMed 11 w/AirFit F20 is my first. Enjoying the ease, still making decisions on a second mask and thinking of trying the AirFit F30 as I’d like to be able to change periodically and also have more open visibility. Overall I feel so much better and have nothing but good things to say about the equipment and experience as it’s a necessity for me
Thanks for the video, new user of wearing a CPAP. When I picked up my AirSense 11, they give you set up and info very quickly. So thank you for the recap. Big help!!
I would try to use it during the day as much as possible during your acclimation. If you can watch some TV with it on or something that will distract you, then you will probably see a much quicker acclimation. Good Luck.
I think this was a good video, I would have liked to see you demonstrate the machine with you putting on the mask connecting the hoses. What is the correct procedure during the night & you need to use the bathroom. Do you take the mask off shut the machine or do you leave the mask on disconnect the hose leave the machine running then reconnect the hose and go back to bed. I'm a senior and I get up 3 to 4 times a night to pee what do you recommend. Also, do I really need to go thru the menu to use it or just turn it on use it and then in the morning or whenever I get up just shut if off. What is the best way to clean the hoses and how do you ensure that no water is left in the hose before using it again. Thank you
I wish they'd answer your questions. I have the same questions..I am wondering what is the recommended procedure when taking the mask off a few times during the night. I'm figuring that removing the mask for a restroom break might cause the Sleep Report to falsely report that mask isn't sealing. For example, should I enable autostart and autostop? Right now, I only have autostart enabled. Thanks!
I loved my Airsense 10. The only reason I got a new one is 3G. Love the touchscreen. I kept my 10 for camping, no 12 volt power supply for the 11. It took my dogs about a week to learn the different sounds when I'm asleep and awake. I was unaware the outlet comes out to clean.
I just got a brand new one today from the VA, looking forward to using it. I originally had a resmed that was 5 yrs old... and I noticed quite a few differences of the new one.. the 2 I liked right off were the bluetooth and touchscreen. Looking forward to using it this evening...
Got mine from you all too. Agree with Mikes comments about only complaint is that the water tank is too small and runs out before sleep interval. if running humidity at a 6. (If i run any lower i get dry mouth) Would be nice for Resmed to offer larger tank for this issue.
Yea the water tank makes this machine crap to me. My old model 10 lasted days. I did learn here if I keep my room at about 50 to 55% humidity it can last 3 days with water. This is better but it is a inconvenience I didn’t need to added to my sleep therapy. So if the tank wasn’t broke why did they change it….as soon as a model comes out with larger tank I will be switching now saving up to try the extra water tank.
I’ve been washing the hose, mask, and water chamber every Saturday since I got my first cpap 12/30/22. I had no idea about the inner part I need to remove and wash so thank you! Also I didn’t know I needed to check my air filter weekly so I’ll be adding that step too. I thought the machine would tell me when it’s time to replace it since it’s so high tech. I am wondering why it won’t stay connected to my Bluetooth. I keep having to reconnect it. I notice when I close the Airsense app, the Bluetooth indicator goes away. I can’t seem to figure it out. Thanks for the info!
I think that the bluetooth is usually because your phone connects to other things and drops out the Air11 connection, but it would be really hard to know. Thanks for watching!
Just received my ResMed11. Has some new good features, but water reservoir is too small. One complaint I have is mask seal is always good on the machine but MyAir tells me to adjust the mask seal. Last night I had to take my mask off in the middle of night because of a massive leak, but machine still said I had a good mask seal.
Thank you for this, watching this was so easy for me to understand and know how to turn and turn off the button and when to know it was cooling down before turning off.
Great video. I just started CPAP therapy 3 days ago. Thanks for showing how to take out the water seal inside to clean. Was not shown that. Do you no anything about humility or heat tube setting? Mine is on auto, but I still have a runny nose
Thanks for the feedback. I have a link below that goes over the AirSense 11 humidity and heated tube settings for you. cpapmyway.com/blog/adjusting-humidity-on-airsense-11-cpap
My first cpap machine just got it today. Tested it and it worked really well extremely quiet and super easy to assemble and set. Looking forward to sleep 😴 tonight. Thanks for the information ❤
I would love it if you can include how to set the air pressure as my machine had the wrong setting since a new Sleep Clinic Test was done and changed my pressure from 6 to 13. thank you again.
Hello, Clay! My wife has the Resmed 11, the exact model in your video. And we LOVE and APRECIATE your video!!!! My wife is having an issue with her Resmed 11. She recently received a new reservoir. She put the NEW one in her 11 and, for her, it is VERY DIFFICULT to remove the reservoir, to fill with distilled water nightly. She put the OD one back in and it is SIMPLE for her to remove the OLD one! Please help us and advise what to do. I suggested she call the supplier and request a replacement reservoir. SHE said, "No! I'll just use the old one till I get another reservoir!" Is this the best answer please? THANK YOU, CLAY!!!!
Well... if it was my CPAP I would call and request a different reservoir from the company that sent it to you. Maybe something was damaged on that new one.
Great video. I just got this machine yesterday. Tried it last night for the first time. Woke up feeling like I got ran over by a truck. Maybe I have a defective machine but I feel worse now then what the snoring problem
I'm pretty new to the CPAP world. I'm having an issue with my AirSense 11 , It worked fine on Thanksgiving night, on Friday night it changed. It sounds like a wind storm. I don't think the pressure is working the air is just blowing
Your videos are very informative. I was just recently diagnosed with (Moderate Obstructive sleep apnea) yesterday and was told I needed a (Auto Titrating Cpap) guessing which mean auto cpap?!? I need a machine that is (DOT Compliant) and was wondering what stuff do i need on the machine. Heated humidifier stuff like that. And also got a prescription and my sleep report too. Trying to figure out what machine is right for me.
Thanks for watching. If you are a needing DOT reporting then you should definitely consider how the reports are generated. The AirSense 11, and Luna G3 have wireless reporting and work great for getting Compliance reports. The Luna 2 is also good, but you have to pull the data on your own with the SD card on your Home Computer. Links to all of these options below as started bundles which come with everything that you need to get going. cpapmyway.com/store/cpap-packages/airsense-11-auto-cpap-bundle cpapmyway.com/store/cpap-packages/luna-g3-auto-package cpapmyway.com/store/cpap-packages/luna-2-auto-starter-bundle
I still use my Resmed 9. 2 years ago it was common sense to buy the 10, given my health fund rebated me 80%. Not long after with email was a query of non-usage. I researched and found with the 10 model my sleep data would be sent by the inbuilt modem. I was never told. When I deploy the S10 I will use CZcams videos showing how to disable the modem.
Took me a while to contend with the hose…my solution I fold the hose at the natural bends and place in a tall vase placed behind the RESMED. Looks nice on my bedside table.
Hi Clay, I truly enjoy your videos. You are professional, experienced and so much more. Is your company a DME? Ive just been diagnosed with moderate OSA-15.4 ahi, and am in search of a DME per insurance! Thank you! 😊
How the heck do you get the water tank off? I thought the white button on top was a release button but it isn't. I literally have to pry it off using the blunt end of a tool to pop it off so I can fill it. Is mine broken? Help
That is super strange. You may want to get a replacement water tank. Maybe something is not right with it. Link to ours below. cpapmyway.com/store/water-chamber/airsense-water-chamber
@@andyminniti8563 thanks Andy, I finally have a routine to get it off, you are right on how to do it, but I just have to grunt and jiggle mine a bit before it gives way....
Great video and very informative! I just started using new 11 after 6 years of 10. My recent complaint is the water tank is smaller and uses all the water in 8 hours. The 10 had a larger tank and I would only use half the tank even with more than 8 hours of sleep. I’m concerned about damaging the unit if all the water evaporates should I sleep past 8 hours. Should I be concerned or is there a humidifier setting that needs adjustment?
I started with an s9. Love it and its bag. Someone in my household got a s10 i didnt care for it, when i had encouragement to get a replacement i fought to get the s11, and, its ok. I like that its smaller i dont like the tank it spills easily when you fill it, and the top is kinda curved so if you store something on top of the (s9) like foam earplugs or a remote, in the s11 it often slides off. But the display and interaction with the myair app is nice. The 10 and 11 use more distilled water than the 9 ever did though. Resmed puts no cord velcro cordkeeper on the 11 either so bring your own or its sloppy for travel. Also the filters are smaller than the 9's and the filter door on the 11 is a janky flimsy flap.
Been using mine for just over 2 weeks. Have nothing to compare it to since it’s my first one. My only complaint is my nose pillows don’t feel like much of a pillow some nights but the machine works great and I have even had some 0 event nights
Just bought my new Resmed 11 today so thank you for your detailed look at the machine. I've been using one since 2007 First the S8 and the S9 and jumping straight onto the ResMed 11. I would also be interested in the cleaning process. Do you have to remove anything from the water tank before you place it in the dishwasher?
So I had a CPAP years ago and could never get used to it and it ended up in the trash. 6 months ago I got this Air Sense 11 and it took me a couple nights to get used to it and now I use it every night ... way, way better than the old machine which I do not even remember the brand. The big PRO for this machine is the way it ramps up the pressure automatically and you do not even hear it run ... SUPER QUIET! The CON to this machine is pulling the water chamber out every night to fill it ... if this had a like a check valve port that you could use like a lab safety squeeze bottle to fill would make it so much easier ... and the other issue is that if I get 7 hours of required sleep the humidifier chamber is bone dry in the morning. It needs to be increased in size a little bit! I did a lot of research before buying this unit and I know it was the best choice!
I had a Resmed Air Sense 10 and the VA switched me to Resmed Air Sense 11. I love it. The only complain I have is the hose connector ro the CPAP machine doesn't have a swivel. So that's the problem. Otherwise, works fantastic! 👍👍💯💯💯😁
Thank you for the information. It’s been less than a week that I have using mine. My biggest issue is while asleep my device goes all the way from 4 -14 and it’s preventing me from getting back to sleep. I have a full mask and it’s drying my mouth so I need to learn how to adjust
Yeh the pressure will be something that takes time to acclimate to. The Humidity should be very adjustable though. We have a great blog on that exact issue. cpapmyway.com/blog/adjusting-humidity-on-airsense-11-cpap
First off great video.. I’m new to the cpap world so I’m learning as much as I can… my questions might be silly or asked already but here it goes… does the water reservoir last all night? It looks small… I just opened my box and I’m wanting to hook everything up… also can u clean the hose and reservoir etc with bleach? Thank you!!!
Switching from a Devilbliss IntelliPap & I run it without the water reservoir because it just had too much rainout for me, can I run this one without the water in the reservoir or with the heating element off? Great videos & thanks for any answer you can provide.
Neither Regular or ClimateLine tubing for the S11 have the oxygen port which attaches directly to the base of the machine. Do you have any update on when this will be available?
I do not have an update on that product. You can put a standard bleed in connector at the mask end of the tubing though. Link to that product below. cpapmyway.com/store/oxygen-bleed-in
Ive heard that on the Air sense 11 that it must be turned on for at least 20 minutes to heat up the humidifier water. Can you use warm water instead to eliminate the 20 minute wait time. thanks, enjoy the channel
You did not mention anything about the headgear. That’s what I was waiting for. I need to see how big this thing is because I could not sleep with all of the gadgets on the first one. That’s why I have never used it. So can you show that part for me please.
The AirSense 11 will work with any mask/headgear combination. Below is a link that helps with mask selection. cpapmyway.com/blog/best-cpap-mask-current-and-new-users
I had to purchase this machine because my System One was part of the recall in 2021. This is my favorite machine and for obvious reasons, plus it was a considerable upgrade from the System One. I'm sure everybody here would agree. The myAir app is fantastic. Easy to use and read your statistics. What I don't like is the bag because there is no room for the cushion or the mask. When I do travel I have to find space in another back for those two items. You said the water chamber can be washed - top rack of dishwasher. Does the same apply to the air outlet seal? P.S. I would suggest using a lapel microphone or a professional microphone so your sound is much clearer and without the echo that is difficult to endure for the entirety of this video.
I’m new to CPAP and used my 11 for the first time last night. I was surprised at how quiet it is. One thing I noticed is that tonight I need to use the chin strap that I received with the machine to keep from mouth breathing! I have a long beard and mustache, and according to my report this morning, the seal on my nasal mask was good all night. So far, one question I have is about the temperature setting. Options are automatic or selecting a specific temperature. I like to sleep in a cold bedroom, so I set the temperature at 67°F. Does lowering the temperature like I did turn off the humidifier? I couldn’t tell whether or not it did or not because the reservoir of water was still very close to the “max“ line this morning. Mine came with heated tubing if that makes any difference.
I have been using my ResMed AirSense 11 for 3 weeks a total nightmare. (I was on Dreamstation one for over 5 yrs.) When speaking to the agent Megan she is in denial, rude and condescending of what I am gong through. The machine is loud, it does not turn off every time air flows out and it over heats. It turns off heater when I am sleep (freezing my inners, at which time I awake and take the mask off to warm my throat and nose). I get messages that read (attention heating system error may run with out heater). Another message something about air flow blocked. Plus, Inside and at bottom moister and water drops. I unplug it now when not in use. Auto is better then manual at lease when on auto the heater warms the water half the time otherwise it makes ice cubes. I will put a trivet under unit tonight so it does not burn my wood night stand and get air flow. Thanks
That sounds terrible. If you are getting error codes like that the machine will need repair or replacement. I am assuming you didn't get it from us, because we do not have a Meagan, but I would definitely get with them and make sure that they get the unit repaired or replaced. Hopefully it is under warranty.
I have this machine as well. Absolute junk. I stop breathing more at night now than when I didn’t use anything. Oh well guess the technology just isn’t there for people who have sleep problems.
I have just received my Air Sense 11 with a heated hose. My physician also wants me on oxygen. How do I get oxygen into the heated hose at the machine end of the hose and keep the heat? I am currently using a non-heated hose into which I know how to connect oxygen. I would like to try the heated hose. Thanks in advance.
We actually have a great blog with links on connecting oxygen to your CPAP. Link below will help you out. cpapmyway.com/blog/connect-oxygen-to-your-cpap
Thank you for your quick response. It is apparent that Res Med does not currently make an oxygen adapter for their heated hose. I also have not found an 8 foot heated hose by Res Med. I assume that since the ResMed 11 is new there has not been a market developed for these products.
I just started using it on the first night after a few hours I awoke parched only to discover in the morning that the reservoir was empty. If I have to get up nightly to refill the reservoir kinda defeats the purpose of using it
Yo Clay, great video! I’ve got that machine on the way from April as soon as I sign the agreement. Stoked for a new machine after my Airsense 10 started falling apart due to user negligence. Will this machine be compatible with the SoClean2 SC1200? If so, will a different reservoir top still be necessary? Lastly, why is it necessary to continually rent these machines without BCBS fully paying and providing to the insured? Thanks again for the video! These machines are truly a blessing, without which I’d be walking around half dead..screaming at everyone..LOL!
Awesome! You will love the 11 I am sure. SoClean is not making the adapters like that any more. So you can use the standard adapter with standard tubing on the Air11, but SoClean isn't promoting integration anymore. The Insurance world is not our specialty. We only provide on the self-pay route. Usually by the time you rent forever through insurance you might have been better to just buy from us. Thanks for watching.
I got a new sleep apnea machine an I can't get my compliance on on my dram sleep. I'm a truck driver. Took it to the Dr. They couldn't get my info. Off. The Sim card. Jump on line an saw this 1 blue tooth much easier for me. 1209. Got to have it good video thanks
I am wondering what is the recommended procedure when taking the mask off a few times during the night. I'm figuring that removing the mask for a restroom break might cause the Sleep Report to falsely report that mask isn't sealing. For example, should I enable autostart and autostop? Right now, I only have autostart enabled. Thanks!
Thank you for a very informative video. You sent Ms. Heather Brown a link on Humidity & Tube Temp, which I watched. I have an AirSense 11 and my Tube temp is set to auto. I want to try adjusting it manually but how do I find out where "auto" had it adjusted to for I can start from there? I prefer not to start at 60 & work myself up gradually to 86. Is there any way to know where my "auto" was adjusted to? Btw, I also have a ClimateLineAir 11. Thanks
I do not think that there is a way to get the current settings when it is in Auto mode. I would start much closer to your room temp or higher in the manual mode.
thanks for the guide. i just got mine and setup was a breeze. managed to connect my cpap to my air app. My issue is that twice now when i open my app, it would ask me to re-sync my cpap machine which i think is weird. Doing that is easy but can be annoying. any ideas why?
That is usually due to mask issues. We have a great blog on missing data and how to correct it. cpapmyway.com/blog/missing-time-on-cpap-compliance-report
I like the PAPClean (link below). It doesnt get ozone into the CPAP which is a good thing. cpapmyway.com/store/cpap-accessories/cleaning-supplies/papclean-cpap-cleaner
Excellent piece of equipment got it 1 week ago changed my Life 100%
I Scored 37 events per hour on the test monitor, now I’m 1.2 events per hour, very quite machine, comfortable full mask will never stop using it . CHANGED MY LIFE!!!!! 👍🏼
That is great!
@@billrau2398 I'm in the same boat! Went from 42 events per hour to 1.2 according to the machine. I'm a little skeptical of how it tracks the events but my wife said I'm not snoring anymore so i know it's doing something!
@@calicryptodude-mel6033😖90 events for me
Definitely a life changer. Upgrading my old 5 year old machine tomorrow 😂I wasn’t aware than I can upgrade every two years
My wife has been using a CPAP for several years. She got a ResMed AirSense 11 right after they first came out. We never new about removing and cleaning the hose port. Thanks for sharing this. She can now clean her machine more completely!
Thanks for watching.
Honestly, I'm tired and can't sleep due to the intense and ongoing pain of 4 broken ribs. I have this cpap but turned on this video thinking it would be just what I need to put me to sleep 😂 What a nice surprise when it was actually interesting and I learned a lot about my machine's use and maintenance! This foreign machine has now become familiar and cleaning is no longer a daunting task. So, while I watched this thinking I'd fall asleep, I watched it all the way through and I'm now going to sleep with a feeling of relief and confidence in caring for this contraption. Thank You so much!
That was super nice! Thank you!
Thanks for your video. I learned a lot. It is a really great video. I was wondering if you would do a video on the entire cleaning part of all the relevant parts to clean (demonstration) like the tubes,etc. It would be great if the entire complete setup ( pillows, tubes,etc.) were taken apart,cleaned, then the video showing all the parts being put back in the machine (obviously you'll need an extra set of parts because the parts cleaned would be wet ;) I'm visual and that would be so helpful. Thanks again for your video!
We can certainly do that. Thanks for the input and for watching.
yes , please do that video.
Yes. I would like a cleaning video
Add me to the list, the visual of cleaning the entire thing would be great.
The comment on the filter door was an excellent "be careful" comment and great information. overall good review. thanks
Glad it was helpful! Thanks for watching.
I’ve been using an old ResMed machine since 2011, and finally decided to get another newer machine. I like this new 11 model. The water tank makes for a messier fill, as my old machine just had a hole in the top to pour the water. This new 11 tank makes you lift off the cover, pour, cover and slide in. I still haven’t done it yet without spilling water!
Thank you so much for your review of the AirSense 11.
How often do you have to add water?
I've just gotten one and I'm using CPAP for the first time. I fill the tank probably once every 2 days.
@@MeliTX you are supposed to take the humidity tank out and was it EVERY DAY. New water is supposed to be added EVERY NIGHT
@@Joe-mz6dc it's supposed to be cleaned and refilled DAILY
Thank you for all the good and bad comments on the video. This is my first time using this cpap. Mine was old and finally stopped working. Will be trying this tonight. Great video and God bless you.
Glad I could help!
Had mine for about a month now and recently have experienced extreme nasal drip. Have been cleaning mask daily and hose weekly. Until this video I didn't know to empty humidifier daily and to clean humidifier and hose attachment weekly. Hopefully this new knowledge, I will get over my nasal issues.
Thanks for sharing!
I’ve been on and off CPAP for more than 20 years. This model is fantastic and my ear pillows fit perfectly. I love the MyAir app.
Thanks for the input.
What are ear pillows?
This machine is terrific! We are new to this therapy and started with a Luna machine that, because of noise, provided LESS sleep (for both of us, me, the wife, and my husband, the user) than severe APNEA. UGH! We were changed over to this machine and noise is GONE. So happy. Still getting used to the masks, we've literally tried everything available and so far it looks like the ResMed Airtouch F20 is the only one we can work with. Getting a fit that doesn't leak AND is comfortable throughout multiple sleeping positions and for longer than 3-4 hours at a time is our remaining challenge. Thanks so much for all of your work, reviews and "mini-lessons". CPAPmyway is fantastic! Cheers
Thank you for watching. Glad that the AirSense 11 has been great for you guys.
I had tried sleep therapy with a cpap 6 years ago and I could not get used to it. The machine I got back then was noisey, the air pressure was not comfortable at all. Hence I stopped the treatment. Now I started the treatment up again and I got this cpap unit by Resmed and I must say it's a game changer. I love it. It is super quiet, the air pressure set is on auto and it gives me what I need when I need it. It has an app that shows your sleep results each morning and it has been easy to set up and use. I absolutely love this unit.
Awesome!
Excellent review. Received my ResMed 11 from the VA (Veterans Admin) and it's a Cadillac compared to my sysone issued in 2011. The quietness of the CPAP machine shocked me. So happy to retire my Darth Vader noisy air machine.
Glad you are enjoying it. Thanks for watching!
Thank you for this! My doctor just prescribed me with this unit and I was hoping to find an "all about" video before I got it so I knew what to expect. You nailed everything I needed to know and more :) Thanks again!
Thank you for watching and for the positive feedback.
Thanks for this video! I’m so happy! I just got one of these today! My first CPAP machine. I can’t wait to use it tonight! Looking forward to a full nights’ sleep! No more total exhaustion all day long!
You are welcome. Be sure to tell us how it goes.
I’m getting mine soon I can’t wait my life has been rough from sleep apnea have you notice a difference in lifestyle since using cpap
I got my first-ever CPAP machine today and this video was extremely helpful. I really appreciate how thorough the video was, I was kinda lost. Looking for the next video on the controls.
I am very glad that it was helpful. I promise to get off my lazy keester and get that menu video out there. Sorry for the delay.
Got mine today getting use to it
0
on my way to pick one up great intro to the device. thx
Thanx for the info was not told about removing hose hookup inside machine so will add that to my cleaning duty's.
No problem 👍
Also got mine from you guys. Great machine, only complaint is that the water reservoir is so small. Other than that 💯
Thank you for the feedback. Glad that you are enjoying it overall. Thank you for ordering with us as well.
Thank you. I am a first time user and I love it. One week and I feel so much better!!!!
Great to hear!
I just received my Resmed 11 about a month ago, so far so good! It's a replacement for my broken Dreamstation that was recalled! So far I love it light weight very easy to use & very quiet! Thank you for your helpful information! Take care & God Bless🙏❤🕊✝
You are welcome. Thank you so much for watching. God bless you as well.
Thank you for all your info. I just got this today, I’m excited to go to sleep tonight and see how I feel tomorrow
Good Luck!
For some reason, I got it this time! Video was very helpful and clear. Never realized the universal fit for the SoClean2. Now I can continue using with my new ResMed which uses a different water reservoir. Thanks.
You are welcome.
I just started my therapy today. This my first cpap and look forward to using it and feeling better. Great video
Awesome!
I just got mine today and will use it for the first time tonight. How has it been for you? Working well? Notice any difference with yourself?
I've been using an S9 for years and I am going to be getting one of these.
This video was very helpful.
I haven't even received the machine yet and I'm thinking of ordering those replacement filter covers lol
Seriously though thank you for posting this
Thanks for watching and you are welcome. We have a few left in stock at this moment if you are looking to get one soon. Link Below
cpapmyway.com/store/cpap-machines/auto-cpap-machines/airsense-11-auto-cpap
Absolutely love, easy set up!
Nice. Thanks for watching.
Ive been using this machine since mid April. First time c-pap user. Im definitely getting more sleep.
Your video was very good. I learned a lot from it. Especially interesting to me was the cleaning information was different from what the service rep told me. I was told to just add water as needed, empty the chamber and clean it once a week and start with new water than.
Also was never told about the piece to take out of the machine to clean.
Do you recommend filtered water or can tap water be used?
Really appreciate all the information.
Just ordered this and the F30i mask, should be here Thursday. It'll be my first time starting CPAP therapy. Looking forward to it and hoping it's not too rough of a start!
I also ordered for my dad, because he struggling with sleep apnea :(
Awesome! Good Luck! We have a nice mask selections blog that might be worth a read. Link below. Reach out if you bump in to any questions.
cpapmyway.com/blog/best-cpap-mask-current-and-new-users
New to CPAP therapy so the ResMed 11 w/AirFit F20 is my first. Enjoying the ease, still making decisions on a second mask and thinking of trying the AirFit F30 as I’d like to be able to change periodically and also have more open visibility. Overall I feel so much better and have nothing but good things to say about the equipment and experience as it’s a necessity for me
@@dianan3487 Thanks for the input.
Thanks for the video, new user of wearing a CPAP. When I picked up my AirSense 11, they give you set up and info very quickly. So thank you for the recap. Big help!!
Glad it was helpful. Good Luck!
I'm a newbie.
Last night I was awake more than asleep.
I hope there is more somewhere on how to use this.
I would try to use it during the day as much as possible during your acclimation. If you can watch some TV with it on or something that will distract you, then you will probably see a much quicker acclimation. Good Luck.
I think this was a good video, I would have liked to see you demonstrate the machine with you putting on the mask connecting the hoses. What is the correct procedure during the night & you need to use the bathroom. Do you take the mask off shut the machine or do you leave the mask on disconnect the hose leave the machine running then reconnect the hose and go back to bed. I'm a senior and I get up 3 to 4 times a night to pee what do you recommend. Also, do I really need to go thru the menu to use it or just turn it on use it and then in the morning or whenever I get up just shut if off. What is the best way to clean the hoses and how do you ensure that no water is left in the hose before using it again. Thank you
Thanks for the input.
I wish they'd answer your questions. I have the same questions..I am wondering what is the recommended procedure when taking the mask off a few times during the night. I'm figuring that removing the mask for a restroom break might cause the Sleep Report to falsely report that mask isn't sealing. For example, should I enable autostart and autostop? Right now, I only have autostart enabled. Thanks!
I loved my Airsense 10. The only reason I got a new one is 3G. Love the touchscreen. I kept my 10 for camping, no 12 volt power supply for the 11. It took my dogs about a week to learn the different sounds when I'm asleep and awake. I was unaware the outlet comes out to clean.
Thanks for the input.
I just got a brand new one today from the VA, looking forward to using it. I originally had a resmed that was 5 yrs old... and I noticed quite a few differences of the new one.. the 2 I liked right off were the bluetooth and touchscreen. Looking forward to using it this evening...
Best of luck!
I just got the airsense 11 I love it very quiet! And fits perfectly on my nightstand
Awesome, and thanks for watching!
@@CPAPmyway you're welcome 🙂
Got mine from you all too. Agree with Mikes comments about only complaint is that the water tank is too small and runs out before sleep interval. if running humidity at a 6. (If i run any lower i get dry mouth)
Would be nice for Resmed to offer larger tank for this issue.
Thanks for that input and buying with us.
I totally agree, Dreamstation lasted days and days, and you could fill it up with taking it out.
Yea the water tank makes this machine crap to me. My old model 10 lasted days. I did learn here if I keep my room at about 50 to 55% humidity it can last 3 days with water. This is better but it is a inconvenience I didn’t need to added to my sleep therapy. So if the tank wasn’t broke why did they change it….as soon as a model comes out with larger tank I will be switching now saving up to try the extra water tank.
I’ve been washing the hose, mask, and water chamber every Saturday since I got my first cpap 12/30/22. I had no idea about the inner part I need to remove and wash so thank you!
Also I didn’t know I needed to check my air filter weekly so I’ll be adding that step too. I thought the machine would tell me when it’s time to replace it since it’s so high tech.
I am wondering why it won’t stay connected to my Bluetooth. I keep having to reconnect it. I notice when I close the Airsense app, the Bluetooth indicator goes away. I can’t seem to figure it out.
Thanks for the info!
I think that the bluetooth is usually because your phone connects to other things and drops out the Air11 connection, but it would be really hard to know.
Thanks for watching!
Just received my ResMed11. Has some new good features, but water reservoir is too small.
One complaint I have is mask seal is always good on the machine but MyAir tells me to adjust the mask seal. Last night I had to take my mask off in the middle of night because of a massive leak, but machine still said I had a good mask seal.
Thanks for the input.
Mine does that too! But not all the time..
Thank you for this, watching this was so easy for me to understand and know how to turn and turn off the button and when to know it was cooling down before turning off.
You are welcome.
Thank you so much to show how to take out the pipe. You did a much better video demonstration than Apria.😊
Glad it was helpful.
Could you do a info on.. hooking up the hoses,what parts hoses come with this machine please. Loved the video need a little more info. Thanks
Will do. Thank you.
Great video. I just started CPAP therapy 3 days ago. Thanks for showing how to take out the water seal inside to clean. Was not shown that. Do you no anything about humility or heat tube setting? Mine is on auto, but I still have a runny nose
Thanks for the feedback. I have a link below that goes over the AirSense 11 humidity and heated tube settings for you.
cpapmyway.com/blog/adjusting-humidity-on-airsense-11-cpap
The VA prescribed me one and it is in the mail. Thanks for the video.
Good luck and thanks for watching!
My first cpap machine just got it today. Tested it and it worked really well extremely quiet and super easy to assemble and set. Looking forward to sleep 😴 tonight. Thanks for the information ❤
Great to hear!
Thanks for great info. Very helpful
Glad it was helpful!
I would love it if you can include how to set the air pressure as my machine had the wrong setting since a new Sleep Clinic Test was done and changed my pressure from 6 to 13. thank you again.
czcams.com/video/D1uhD42aP9I/video.html
Here is the video for the DreamStation 2 settings.
Hello, Clay! My wife has the Resmed 11, the exact model in your video. And we LOVE and APRECIATE your video!!!! My wife is having an issue with her Resmed 11. She recently received a new reservoir. She put the NEW one in her 11 and, for her, it is VERY DIFFICULT to remove the reservoir, to fill with distilled water nightly. She put the OD one back in and it is SIMPLE for her to remove the OLD one! Please help us and advise what to do. I suggested she call the supplier and request a replacement reservoir. SHE said, "No! I'll just use the old one till I get another reservoir!" Is this the best answer please? THANK YOU, CLAY!!!!
Well... if it was my CPAP I would call and request a different reservoir from the company that sent it to you. Maybe something was damaged on that new one.
I did explain it compare one video I saw. Had hard time inside how to remove outlet seal. U explanation was better. Thank u 2024
Thanks for the input.
Looking forward to getting my new 11. I have been using an old S9 and the noise it makes has started to really hinder my sleeping.
We have a ton of customers that love the AirSense 11 for sure.
Great video. I just got this machine yesterday. Tried it last night for the first time. Woke up feeling like I got ran over by a truck. Maybe I have a defective machine but I feel worse now then what the snoring problem
I would give it some more time. It can take a while for the machine to adjust to the best pressure for you.
Using mine for the 1st time tonight.
Good luck!
@@CPAPmyway I'm a fan.
@@garyrichards9680 Awesome.
I'm pretty new to the CPAP world. I'm having an issue with my AirSense 11 , It worked fine on Thanksgiving night, on Friday night it changed. It sounds like a wind storm. I don't think the pressure is working the air is just blowing
If it is in Auto mode, then it will change as needed. The most drastic changes happen during the first couple weeks for sure.
Me too. Mine shuts off in middle of the night and I can’t get air
Your videos are very informative. I was just recently diagnosed with (Moderate Obstructive sleep apnea) yesterday and was told I needed a (Auto Titrating Cpap) guessing which mean auto cpap?!? I need a machine that is (DOT Compliant) and was wondering what stuff do i need on the machine. Heated humidifier stuff like that. And also got a prescription and my sleep report too. Trying to figure out what machine is right for me.
Thanks for watching. If you are a needing DOT reporting then you should definitely consider how the reports are generated. The AirSense 11, and Luna G3 have wireless reporting and work great for getting Compliance reports. The Luna 2 is also good, but you have to pull the data on your own with the SD card on your Home Computer. Links to all of these options below as started bundles which come with everything that you need to get going.
cpapmyway.com/store/cpap-packages/airsense-11-auto-cpap-bundle
cpapmyway.com/store/cpap-packages/luna-g3-auto-package
cpapmyway.com/store/cpap-packages/luna-2-auto-starter-bundle
For first time users, is it necessary to bring the machine to dr. to have it calibrated to correct air pressure, or do you just set it yourself?
I’m wondering the same
It is usually a good idea to follow up with your Dr to make sure that it is working correctly and doing a good job for you.
The medical supply company that my insurance company sent me to for my machine and they had it set up as ordered by my sleep doctor.
There is no calibration needed.
I still use my Resmed 9. 2 years ago it was common sense to buy the 10, given my health fund rebated me 80%. Not long after with email was a query of non-usage. I researched and found with the 10 model my sleep data would be sent by the inbuilt modem. I was never told. When I deploy the S10 I will use CZcams videos showing how to disable the modem.
You can disable the modem by turning on the Airplane Mode in the patient level menu. Under My Options.
New. Should air be releasing from the hose?
Got the snow ❄️
Cool down process. it will blinking when the cool down is over.
Took me a while to contend with the hose…my solution I fold the hose at the natural bends and place in a tall vase placed behind the RESMED. Looks nice on my bedside table.
Very cool!
@CPAPmyway please sir I need your phone numbers I want to ask you something about my CPAP
Hi Clay, I truly enjoy your videos. You are professional, experienced and so much more. Is your company a DME? Ive just been diagnosed with moderate OSA-15.4 ahi, and am in search of a DME per insurance! Thank you! 😊
We are a DME, but we do not take insurance. Thank you so much for the kind words and for watching!
@CPAPmyway Thank you and you are so welcome!
Can the air outlet seel be washed in the dishwasher too?
Thank you daddy ❤❤❤
No problem
Excellent video, excellent presentation, excellent information. Some good heads up! Much appreciated!
Thanks for watching!
How the heck do you get the water tank off? I thought the white button on top was a release button but it isn't. I literally have to pry it off using the blunt end of a tool to pop it off so I can fill it. Is mine broken? Help
That is super strange. You may want to get a replacement water tank. Maybe something is not right with it. Link to ours below.
cpapmyway.com/store/water-chamber/airsense-water-chamber
Same here. Mine is stuck so bad that nothing will allow the tank to be removed.
It just separates very easily by putting left hand on unit to steady it ,thumb on top fingers on bottom ,pull very little effort .
@@andyminniti8563 thanks Andy, I finally have a routine to get it off, you are right on how to do it, but I just have to grunt and jiggle mine a bit before it gives way....
Great video and very informative! I just started using new 11 after 6 years of 10. My recent complaint is the water tank is smaller and uses all the water in 8 hours. The 10 had a larger tank and I would only use half the tank even with more than 8 hours of sleep. I’m concerned about damaging the unit if all the water evaporates should I sleep past 8 hours. Should I be concerned or is there a humidifier setting that needs adjustment?
It will not damage anything if it runs out of water. Just might be uncomfortable if you get dried out. Thanks for watching.
Thank you for your information!
You are very welcome.
I started with an s9. Love it and its bag. Someone in my household got a s10 i didnt care for it, when i had encouragement to get a replacement i fought to get the s11, and, its ok. I like that its smaller i dont like the tank it spills easily when you fill it, and the top is kinda curved so if you store something on top of the (s9) like foam earplugs or a remote, in the s11 it often slides off. But the display and interaction with the myair app is nice. The 10 and 11 use more distilled water than the 9 ever did though. Resmed puts no cord velcro cordkeeper on the 11 either so bring your own or its sloppy for travel. Also the filters are smaller than the 9's and the filter door on the 11 is a janky flimsy flap.
Great input. Thank you.
Clay...you are amazing! Thank you for all the great information and I love all your videos.
Thanks so much!
I’m picking up my resmed 11 today to replace my resmed 10. I hope I like it
I am sure that you will.
Been using mine for just over 2 weeks. Have nothing to compare it to since it’s my first one. My only complaint is my nose pillows don’t feel like much of a pillow some nights but the machine works great and I have even had some 0 event nights
Sounds like a great start!
Thank you SO much!!!
Glad it helped!
Thanks this help me a lot I just got my c pep in December and it’s been kind of hard to get used to I try to stay on at least 7 or 8 hours
Very glad that it was helpful.
Thank you for informative video.
Glad it was helpful!
Just bought my new Resmed 11 today so thank you for your detailed look at the machine. I've been using one since 2007 First the S8 and the S9 and jumping straight onto the ResMed 11. I would also be interested in the cleaning process. Do you have to remove anything from the water tank before you place it in the dishwasher?
You should not have to remove anything. Thanks for watching!
So I had a CPAP years ago and could never get used to it and it ended up in the trash. 6 months ago I got this Air Sense 11 and it took me a couple nights to get used to it and now I use it every night ... way, way better than the old machine which I do not even remember the brand. The big PRO for this machine is the way it ramps up the pressure automatically and you do not even hear it run ... SUPER QUIET! The CON to this machine is pulling the water chamber out every night to fill it ... if this had a like a check valve port that you could use like a lab safety squeeze bottle to fill would make it so much easier ... and the other issue is that if I get 7 hours of required sleep the humidifier chamber is bone dry in the morning. It needs to be increased in size a little bit! I did a lot of research before buying this unit and I know it was the best choice!
Thanks for the input.
I had a Resmed Air Sense 10 and the VA switched me to Resmed Air Sense 11. I love it. The only complain I have is the hose connector ro the CPAP machine doesn't have a swivel. So that's the problem. Otherwise, works fantastic! 👍👍💯💯💯😁
Great! Thanks for the input.
Thank you for the information. It’s been less than a week that I have using mine. My biggest issue is while asleep my device goes all the way from 4 -14 and it’s preventing me from getting back to sleep. I have a full mask and it’s drying my mouth so I need to learn how to adjust
Yeh the pressure will be something that takes time to acclimate to. The Humidity should be very adjustable though. We have a great blog on that exact issue.
cpapmyway.com/blog/adjusting-humidity-on-airsense-11-cpap
@@CPAPmyway thank you for the advice
@@tabitha8808 Very welcome. Good Luck!
Great Video ! I use the Airsense 10 love it but I can see all the Pros with this Machine !
Thank you.
I will be starting tonight. Ty for the information.
Good Luck!
Thanks you very much for this video. I'm using it right now . Very expensive . I started using this machine after covid.
Covid mad a mess with my health 😔
Thank you for watching and for the input.
Sorry to hear that.
Great review! Thank you.
Glad it was helpful!
First off great video.. I’m new to the cpap world so I’m learning as much as I can… my questions might be silly or asked already but here it goes… does the water reservoir last all night? It looks small… I just opened my box and I’m wanting to hook everything up… also can u clean the hose and reservoir etc with bleach? Thank you!!!
It should last all night, and should be refilled nightly before use
Is the green light supposed to stay on. I can't figure out how to turn it off.
Switching from a Devilbliss IntelliPap & I run it without the water reservoir because it just had too much rainout for me, can I run this one without the water in the reservoir or with the heating element off? Great videos & thanks for any answer you can provide.
Yes you can. checkout this blog and video on running without water.
cpapmyway.com/blog/can-i-use-my-cpap-without-water-pros-and-cons
Neither Regular or ClimateLine tubing for the S11 have the oxygen port which attaches directly to the base of the machine. Do you have any update on when this will be available?
I do not have an update on that product. You can put a standard bleed in connector at the mask end of the tubing though. Link to that product below.
cpapmyway.com/store/oxygen-bleed-in
Ive heard that on the Air sense 11 that it must be turned on for at least 20 minutes to heat up the humidifier water. Can you use warm water instead to eliminate the 20 minute wait time. thanks, enjoy the channel
If you click more options in the main screen you should see a preheat setting. That will preheat the water before you turn the CPAP on.
Have one and love it
Nice. Thanks for watching.
You did not mention anything about the headgear. That’s what I was waiting for. I need to see how big this thing is because I could not sleep with all of the gadgets on the first one. That’s why I have never used it. So can you show that part for me please.
The AirSense 11 will work with any mask/headgear combination. Below is a link that helps with mask selection.
cpapmyway.com/blog/best-cpap-mask-current-and-new-users
I had to purchase this machine because my System One was part of the recall in 2021. This is my favorite machine and for obvious reasons, plus it was a considerable upgrade from the System One. I'm sure everybody here would agree. The myAir app is fantastic. Easy to use and read your statistics.
What I don't like is the bag because there is no room for the cushion or the mask. When I do travel I have to find space in another back for those two items.
You said the water chamber can be washed - top rack of dishwasher. Does the same apply to the air outlet seal?
P.S. I would suggest using a lapel microphone or a professional microphone so your sound is much clearer and without the echo that is difficult to endure for the entirety of this video.
Thanks for the input.
I’m new to CPAP and used my 11 for the first time last night. I was surprised at how quiet it is. One thing I noticed is that tonight I need to use the chin strap that I received with the machine to keep from mouth breathing! I have a long beard and mustache, and according to my report this morning, the seal on my nasal mask was good all night.
So far, one question I have is about the temperature setting. Options are automatic or selecting a specific temperature. I like to sleep in a cold bedroom, so I set the temperature at 67°F. Does lowering the temperature like I did turn off the humidifier? I couldn’t tell whether or not it did or not because the reservoir of water was still very close to the “max“ line this morning. Mine came with heated tubing if that makes any difference.
The temp will regulate the tubing. Increase the setting if you get water in the tube.
I have been using my ResMed AirSense 11 for 3 weeks a total nightmare.
(I was on Dreamstation one for over 5 yrs.)
When speaking to the agent Megan she is in denial,
rude and condescending of what I am gong through.
The machine is loud, it does not turn off every time air flows out and it over heats.
It turns off heater when I am sleep (freezing my inners, at which time I awake and take the mask off to warm my throat and nose).
I get messages that read (attention heating system error may run with out heater). Another message something about air flow blocked.
Plus, Inside and at bottom moister and water drops.
I unplug it now when not in use. Auto is better then manual at lease when on auto the heater warms the water half the time otherwise it makes ice cubes.
I will put a trivet under unit tonight so it does not burn my wood night stand and get air flow.
Thanks
That sounds terrible. If you are getting error codes like that the machine will need repair or replacement. I am assuming you didn't get it from us, because we do not have a Meagan, but I would definitely get with them and make sure that they get the unit repaired or replaced. Hopefully it is under warranty.
I have this machine as well. Absolute junk. I stop breathing more at night now than when I didn’t use anything. Oh well guess the technology just isn’t there for people who have sleep problems.
I have just received my Air Sense 11 with a heated hose. My physician also wants me on oxygen. How do I get oxygen into the heated hose at the machine end of the hose and keep the heat? I am currently using a non-heated hose into which I know how to connect oxygen. I would like to try the heated hose. Thanks in advance.
We actually have a great blog with links on connecting oxygen to your CPAP. Link below will help you out.
cpapmyway.com/blog/connect-oxygen-to-your-cpap
Thank you for your quick response. It is apparent that Res Med does not currently make an oxygen adapter for their heated hose. I also have not found an 8 foot heated hose by Res Med. I assume that since the ResMed 11 is new there has not been a market developed for these products.
Thank you for this helpful video. I just got my Airsense 11 today.
Can i use it immediately? No need to set up the pressure?
It should come preset to your Rx settings by the supplier that sent it to you. Should be ready for use.
I just started using it on the first night after a few hours I awoke parched only to discover in the morning that the reservoir was empty. If I have to get up nightly to refill the reservoir kinda defeats the purpose of using it
The filter door on THE Resmed 10 is easy to break as well.
great point.
Yo Clay, great video! I’ve got that machine on the way from April as soon as I sign the agreement. Stoked for a new machine after my Airsense 10 started falling apart due to user negligence. Will this machine be compatible with the SoClean2 SC1200? If so, will a different reservoir top still be necessary? Lastly, why is it necessary to continually rent these machines without BCBS fully paying and providing to the insured? Thanks again for the video! These machines are truly a blessing, without which I’d be walking around half dead..screaming at everyone..LOL!
Awesome! You will love the 11 I am sure.
SoClean is not making the adapters like that any more. So you can use the standard adapter with standard tubing on the Air11, but SoClean isn't promoting integration anymore.
The Insurance world is not our specialty. We only provide on the self-pay route. Usually by the time you rent forever through insurance you might have been better to just buy from us.
Thanks for watching.
I got a new sleep apnea machine an I can't get my compliance on on my dram sleep. I'm a truck driver. Took it to the Dr. They couldn't get my info. Off. The Sim card. Jump on line an saw this 1 blue tooth much easier for me. 1209. Got to have it good video thanks
Thank you
I am wondering what is the recommended procedure when taking the mask off a few times during the night. I'm figuring that removing the mask for a restroom break might cause the Sleep Report to falsely report that mask isn't sealing. For example, should I enable autostart and autostop? Right now, I only have autostart enabled. Thanks!
Yes. It is best for you to turn it off then turn it back on when you start back on the CPAP again.
You NEVER gave the promised info LINKS for details such as blog...etc.
Thanks for the info. I just checked and it looks like they are all in the Description of the video. Is there a specific link that you need?
Thank you for a very informative video. You sent Ms. Heather Brown a link on Humidity & Tube Temp, which I watched. I have an AirSense 11 and my Tube temp is set to auto. I want to try adjusting it manually but how do I find out where "auto" had it adjusted to for I can start from there? I prefer not to start at 60 & work myself up gradually to 86. Is there any way to know where my "auto" was adjusted to? Btw, I also have a ClimateLineAir 11. Thanks
I do not think that there is a way to get the current settings when it is in Auto mode. I would start much closer to your room temp or higher in the manual mode.
@@CPAPmyway Thank you so much for responding! Yeah, that makes sense.
thanks for the guide. i just got mine and setup was a breeze. managed to connect my cpap to my air app. My issue is that twice now when i open my app, it would ask me to re-sync my cpap machine which i think is weird. Doing that is easy but can be annoying. any ideas why?
How do you like it?
how does 1 one the humidifier? Wish this video had explained this part.
I am not understanding the question. I am sorry.
I used my cpap last night and it is showing no usage from last night. The machine was running. Any idea what I may be doing wrong?
That is usually due to mask issues. We have a great blog on missing data and how to correct it.
cpapmyway.com/blog/missing-time-on-cpap-compliance-report
What is the best product to buy to clean equipment. I had so clean before. What to you suggest! Thank you 😊
I like the PAPClean (link below). It doesnt get ozone into the CPAP which is a good thing.
cpapmyway.com/store/cpap-accessories/cleaning-supplies/papclean-cpap-cleaner
What does it mean when it doesn't come on? The green light is on but it's now responding
That is tough one. I would reach out to your CPAP supplier and ask them what is up. They should have remote access to your AirSEnse 11.