Mastering Toro TimeCutter: Ultimate Guide to Easily Servicing Your Zero Turn Mower Like A Pro
Vložit
- čas přidán 6. 06. 2023
- Thank you for watching!! If we helped you out and you want to show your support - LIKE, SUBSCRIBE or give us a shout out below. If you saw something you didn't like leave your comment below as well, these things help us get better!
To see our recommended tools and products visit our Amazon shop at www.amazon.com/shop/individua...
Service Your Toro TimeCutter Zero Turn Mower!
Join us in this comprehensive guide as we give step-by-step instructions for servicing your machine like a true professional.
Routine maintenance and service tips to keep your Toro TimeCutter performing at its peak.
Don't miss out on this must-watch tutorial that's destined to make maintaining your mower easier.
This repair video is done on a Toro Timecutter model 75740, which is virtually the same as the SS4200 and many other models.
Air filter is part number 136-7814 we use Rotary 16829 ( amzn.to/41gEZpe )
Oil filter is part number 136-7848 we use Rotary 15181 ( amzn.to/488bub7 )
Fuel filter is part number 139-0717 we use Oregon 07-122 ( amzn.to/4aeUOR5 )
Spark plug is part number 77-7330 we use Briggs & Stratton 491055t can also use Champion RC12YC or NGK BKR5ES ( amzn.to/3RcgaWQ )
Use 10w30 motor oil - we use synthetic blend
Like and subscribe to see more helpful videos like this one! Save some money by doing it yourself!
#toro #loncin #smallenginerepair #individualizedrepair #smallbusiness #diymaintenance
About Us:
My name is Martin. I have been repairing tools and small engines for almost 20 years. We operate a small engine repair shop in Illinois. We service / repair Briggs & Stratton, Kohler, Kawasaki, John Deere, Cub Cadet, Toro Tecumseh, Loncin, Honda, Craftsman, Husqvarna, MTD, Troy Bilt, Simplicity, John Deere, Exmark, LCT, Generac and many more brands. We work on riding mowers, walk behind mowers, snow blowers, zero turns, generators, pressure washers and much more. We normally repair about 3,000 pieces of equipment every year and look at many more that are beyond an affordable repair. Hopefully our videos will save you some money and give you the information you need to work on your own equipment or figure out the issue at hand.
Disclaimer: Links included in the description are affiliate links. As an Amazon associate we earn from qualifying purchases. There will be no additional charge to you for purchasing here. We appreciate your support, which allows us to continue to provide original content!
Please be careful when repairing any piece of equipment and follow all possible safety measures. This video is for entertainment purposes only.
AllWAYS waiting on your video 😊
I have a 2022 42 in. With a Kohler 22 HP. Iron forged deck.. for my property..I service my unit on my single post inground lift ..I pull off the sleeves on the lift and drive over it to take off the blades for maintenance ..etc. I can get her up over my head to clean the deck , I have 54 hour in my toro. I bought it with the hour meter..I love toro.. products..great video..great advise. IL run 10- 30 .I'm down in Florida. It's hot down here and lots of sand..in the lawns..no dirt..
It's that damn parking module. Apperiently there is a problem with them straight from the factory. Alot pf folks have had issue with. Some almost brand new. Thanks for sharing this with us.
Thanks!
Nice video. You sound just like Tom Hanks.
The tire pressure that you're reading on the sidewalls is the max tire pressure. Toro recommended pressure is much lower. Your tires are over inflated!
I liked this video. I have had this timecutter for 2 years and wondered if I need to service the drive hydraulics and adjust the forward/reverse handles as one is slightly ahead of the other? Thanks
Any info on what plugs, belts , blades to stick to get going? I’m doing a mobile blade sharpening and get a lot of requests for tune up which I can do ( doing at my house for drop offs and neighbors) but don’t carry any stock. Not all homeowners know how to find motor number or model type. Excellent video. Thank you.
Awesome video! I have a time cutter an it’s running rough, I’ve changed plugs an it ran better but then fowled out again I think it’s running rich what could be the problem?
Orgen has good parts and I’ve never had a problem with them
I put my waste oil on top of my cross tie fence post and spray the side
What brand of fuel hose do you use???
What brand is your oil remover and size ???
I have a slow leak on my left hydro. I wanted to add some fluid. Should I fill atw to the top??
How do I level de deck? The left side it's an inch lower than the right side.
Where can I get a electric schematic for the Toro time cutter???
I have a 42" timecutter but the adjustments on the handles do nothing for the speed. Going forward it steers left and going back it's much worse going right. 2 weeks old.
Why do you say in the description you can use champion RC12YC but in the video you say it's not the right plug that's in it? I have the same engine and use the RC12YC without any problems but if I need to change to NGK I'll do it. Thanks good video as always.
This is crazy. I’ve watched 20 plus toro videos to find a drain on 75740 and the only one (this one) has the guy using a specialty tool to remove the damn oil. Absolutely infuriating trying to just drain this damn thing.
Want fire.