Custom Hot Wheels - Video Series EP3: Custom Brass Axles
Vložit
- čas přidán 27. 02. 2023
- In this video we will go over everything that you need do know to be able to install any wheels to any Hot Wheels, Matchbox, Johnny Lightning, M2 or Adventure Force 1/64 diecast vehicle. I will go over, step by step the process of design, wheel harvesting, axle design, axle fabrication, wheel installation, glueing, and finished axle installation. I will go over all of the tools and materials necessary to complete your custom axle project. And along the way I will go over all of my failures that I had while learning what I know so that you don’t make them yourselves. I will also give you two of my perfect axle secrets that will put you ahead of the game in your quest to produce a not only a sweet looking ride, but one that is functional. These cars will not fall apart if you follow this easy process. Display to Track Day, you too can create any custom car your imagination can come up with and It all starts with axles, wheels and tires.!!
Burbank’s House of Hobbies (where I get my axle materials)
houseofhobbies.com/
Other Videos in my Custom Hot Wheels Series:
Custom Hot Wheels - Video Series - Start to Finish - EP1: Introduction
• Custom Hot Wheels - Vi...
Custom Hot Wheels - Video Series - EP2: Taking Things Apart
• Custom Hot Wheels - Vi... - Krátké a kreslené filmy
Wow, I checked out the hobby store that you list and I am blown away at how big is. And how many products they have. You can get lost in there. 😮🏎
Super awesome hobby store.!! They have just about everything diecast.!! 😊
Great idea with the brass tubing
It's the secret ingredient.!! I was axle handcuffed until I found the brass axle. Now it's any wheel... any car. Thanks again for the long view and comments, Thad. 🤜🤛
This is hands down the best step-by-step on CZcams
Awe, and this is one of my favorite videos.! This is very nice to say. I stand by and still use everything in this video too. Many thanks for your great comment. 🏎😁
Very cool tips Brian. This is really a good information video for Hot Wheels enthusiasts👍
I am really hoping that this will help many in their quest for the perfect diecast custom.!! 😊
Outstanding video! There’s a lot to unpack in there. Your editing was top tier. Very easy to watch. I was learning and I didn’t know it…😂
Hey I really appreciate that great comment my friend.!! I worked hard on this one. I just know that it will help someone out there.
Nice job. Tons of info packed into it.
I am stoked at how this turned out. I put several days of work into this one. Super glad you liked it. Many thanks for the great comment my friend.!! 😎🏆🏎
Very cool edition to your series, Brian. This will help a ton of Hot Wheels customizers.
I hope so. I have been asked by no less than 20 people to make this exact video. I really hope that it helps them out. Many thanks for not only watching this epic video, but for your great comment too. :)
@@AMAZINGRC 😃
Awesome how to video
Really appreciate that my bro.!! I put some work into this one. I am just about to start tearing down your brother's car. I am excited to get started on it. Gonna be dope.!!
Awesome video series 👍👍👍
Really appreciate that great comment my friend.!! I worked super hard on this one. 😊
Very cool stuff Brian. All great tips man. I am gonna have to stop watching these lol I will be taking apart Hot Wheels next. Nice work brother I am sure there are lots out there that got a lot of info from this. :)
I really appreciate your view on this video. I need awesome people like you to check it out for me so that it will get the mighty algorithm gods to send it to the people that need it. 30, minutes is a long time and for that I thank you dearly.
Instead of ca and gorilla to put the axles in the chassis, you can also use 5 minute epoxy..
That one I haven't tried. I know exactly what you are talking about too. I've seen it before. I'll pick some up. 😊
You put the work in bruh
I worked so hard on this Big Mike.!! I really thank you a ton for watching it for me. Now we can get the almighty algorithm god to get this awesome video to the people that need it. Thanks brother Mike.!!
I always wanted to know were you got your axle tubes. I was swapping wheel sets that were the same length or shorter. Thank you for this great new video. This answers so many questions. 🤜🤛
You are very welcome my friend.!! I used to be axle handcuffed just like you until I studied what the pros were doing. The key is the brass axles. Good luck and happy customizing.!!🏎😊🏆
Awesome video!!! Super informative. I'm not big into small dicast cars but I feel like I can make a cool one if I ever wanted to. I really hope your new video does big numbers. I can tell that you put a lot of effort into it. Good luck with it my friend. 👍👍👍
I’m so happy with how this turned out. I worked so hard on it. If it helps just one person I would be super stoked.!! Many many thanks my friend for the great comment..!!!
I think that it eill help many new and seasoned customizers alike. Tons of great info in here. Well done 👍
Burbank is my go to as well, awesome retailer
I love their shop.!! So many goodies.!!
Awesome sauce Brian !
I am super happy with how this turned out. This video took a ton of work. I'm so glad people are getting into it. 📽🏎😊
Great instructional vid , many thanks
Hey I really appreciate your great comment.!!
Really very interesting work, it takes a lot of patience and meticulousness, but you are good at this work, bravo 👏
Awe, thanks Pascal.!! Really appreciate the great comment. I really do enjoy doing this tiny car stuff.
@@AMAZINGRC 😉👍
🏆🏆🏆
Many many thanks my friend for the great comment.!! 🏆🏎😊
Thanks mate I have been looking for thinwall brass tubing!
No problem.!! I love this stuff. I use it all the time.!!
That's very cool mate. Have subbed the channel. Look forward to seeing more.
Really appreciate that great comment my friend.!! I am your newest biggest fan.!! Love your channel.!! 😊
Is it possible to crimp the brass tube with wire crimpers (as you would a butt connector) to hold the axle in place? I guess you might deform the brass tube and it wouldn't fit in the chassis. Just a thought.
You can crimp the tube.However it does not give you a really good hold on the axles. I wish I could juse the crimping message. But I have not had very good luck with wheels staying on..
Great video, what size are the brass tube?