Making a split nut
Vložit
- čas přidán 4. 06. 2023
- In this video, we are making a screw nut that is consisted of two parts for an English wheel restoration.
► Get the Plan: bit.ly/4e0QZB4
► Our Website: www.makeitextreme.com
► Tools we recommend:
Engineers Squares Set: amzn.to/3IgWU4G
25FT Tape Measure: amzn.to/3hcUBDH
Mitutoyo 500-197-30: amzn.to/3sZwXQB
Marking Tool: amzn.to/3Ig0SdX
Welding Magnets: amzn.to/3JRATJU
Digital Angle Gauge: amzn.to/3h9MojF
Heavy Duty C Clamp: amzn.to/3BZ2uGJ
Center Punch Set: amzn.to/3hcWDnj
Jobber Drill Set: amzn.to/3HgsYo3
Multicolor L-Key Set: amzn.to/3t2Xxsb
Countersink bits: amzn.to/3sci2mT
Magnetic Drilling Cutter Kit: amzn.to/3HdsKy0
Camera Nikon D7500: amzn.to/3sot7l0
Useful Tools we recommend: amzn.to/3Ii2ljF
Lathe/Milling Parts: amzn.to/33JjDqX
Makita Tools: amzn.to/3t0eOSR
Videography: amzn.to/3H8jaMM
Our PC: amzn.to/3Hexljo
► Check our Storefront:
www.amazon.com/shop/makeitext...
-----------------------------------------------------------------------------
Subscribe: bit.ly/MakeitExtremeShorts
Main Channel: bit.ly/MakeitExtreme
Facebook: bit.ly/Makeitextreme
Instagram: bit.ly/makeitextreme
TikTok: / makeitextremeshorts
#makeitextreme #makeitextremeshorts #splitnut - Zábava
The official grease butter knife is definitely my favorite part.
Nice machining. I appreciate his honesty for showing at 5:58 that the knurl is all fucked up.
That is really nice craftsmanship!
INSANELY SLICK PRODUCTION. Both knowledge to do the work and same for camera work, lighting, editing, and soundtrack. WOW.
I don't have the words to describe how entertaining your videos are! Chapeu bas!
I agree - wow
😀👍
Well then … I do appreciate your kind words, everyone. We’ll keep it up! I always feel like I’m just chatting with my friends! Adios, Roy
Oops, thought I was commenting on my channel. But I agree with the other comments about your video. Well done! Roy
It’s a pretty big flex for someone to say they use an English wheel in fabrication. It’s a whole other level to say you built the English wheel that you use in fabrication. 👍✌️
I love making homemade tools. Thanks for this.
IMPRESSIVE!!!
Wow!
The English Wheel reimagined!
Thanks for sharing! 😊
I was trying to explain to some people at my office job why machines parts can be so expensive. This video is a good example. Mass producing these would take a small facility with multiple machines. I quickly lost count of the number of operations it took…
Fine tolerance work gives me a warm glow all over.
Always well thought out and constructed, and always a thumbs up.
Nice vids, but lose the music completely. People enjoy hearing the working sounds
Outstanding work. Especially cutting that metric thread.
Thank you.
I love great craftsmanship like this.
Great job.
Everything from start till you used the thing you made so much sense! The wait was worth it!!!
When the tool becomes the work of art itself... it's truly amazing.
Real craftsmanship . Respect.
When my grandfather saw really wonderful work he'd say" that man really knows what he's doing." You qualify.
Wow… being a CNC Machinist, I enjoyed watching this!
Io sono un tornitore manuale, è difficile passare ad un cnc?
@@MECCANICISTA082 изучи базу управления чпу, думаю несложно если имеешь навыки пользования цифровой техникой
That is an incredible work.👍👍
I like machining videos and I like body working tools. This was a 2 for 1. Thanks.
I just love manual machining , good job Bro !
Great work as always. We shared this video on our homemade tools forum this week 😎
👍👌👏 Oh WOW, simply fantastic! Extremely well done (video and work). It was an enormous effort to fabricate this but it is definitely a work of art in the end. Excellent craftsmanship too of course.
Thanks a lot for making teaching explaining recording editing uploading and sharing.
Best regards luck and health in particular.
Fantastic project. Thank you for showing us the final implementation and item in use
Now that’s craftsmanship!
Beautiful work!
Nice work!
Having the steps in correct order is important.
Only minor detail I'd considered to do differently is to avoid having the handle holes in the split to avoid stresses on the split and thread, but it's a minor detail.
That is exactly what I thought as well. Damn fine work, though.
I don't know how much pressure is normally applied on an english wheel or what torque that would require but I doubt you are going to yield two m12 fasteners. Also it would aid in getting halves apart.
@@davidplatenkamp// Agreed; there simply isn't that much pressure-rather torque/force being applied to begin with.
Nice work. Minor point for improvement would be when aligning the split faces for surface grinding, after being cut on the bandsaw. You used a digital angle finder, on a sawn face. You could end up with the tapped holes not being perpendicular to the split faces, which in a more critical application would cause undue stress on the bolts.
Wind the tap into one of the holes, and using a clock, or your angle finder, adjust until the tap is vertical, use a drill blank to suit the plain/counterbored holes to do the same on the other half.
Many ways to do things. This one was well done.
Not a critical application this this was a more than acceptable way to do it. Unnecessary set up time therefore wasted production time. If I sent a drawing to our machinists with a +/- . 010 and they wasted time trying to get +/- .002 somebody is getting fired.
@@matthewmoilanen787 I’m well aware that it’s not a critical application, but, to do what I’d explained would literally take me 2 minutes. If you would fire someone for that, I don’t think you’d last very long in a position of power.
I agree the sawn face could have had all sorts of out of square, I would not have used the china angle finder
@@matthewmoilanen787what is important here is not the +- 10 thou (that is a tolerance for woodworking, not metal) but the concept of collinearity of the bolts holes.
Thanks,, no into, no B.S, straight to the point, Fantastic 👍
All I can say is "Bravo!" 👏
Sometimes just a hardware nut with a hose clamp will work, but when the finished part works above expectations, any extra time spent was worth it
Just subscribed to see more of your work
You are a credit to your profession. Your skills reminds me of my late fathers work. I learned from the best, obviously you also have.
They say:
If you work with your hands, you are a worker
If you work with your hands and your brain, you are a maker
And if you work with your hands, mind and heart, you are an artist.
Greetings from western Algeria.
I have no hands, what am I, a digital clock?
👍
Thanks for finishing the video and show us what that was for.
Very nice work, thank you for sharing.
Great job, thanks from old New Orleans
Masterful !!! 🫵🏻💪🏻👍🏻
Very Nice, great job.
Thanks for sharing.
Sweet job!
Another great one. Thanks.
Absolutely amazing.
Cool as always!
You gotta appreciate and respect anything that is done with a high level of precision. Kudos sir!!
supreme video for an excellent machining job.
the English Wheel was a nice surprise at the end
super narzędzie, ale aby je wykonać potrzebne są inne i nie mniej precyzyjne. Piękna robota, BRAWO!!!!!
Awesome! I was surprised to see the parts were for an English wheel! Very cool! That throat/frame is amazing too!
Very elegant 👍
Beautiful!
Quality of your videos have become outstanding
Beautiful work.
love the extra mile you went bubby
Very rarely u get a amazing lathe job likr this one
Amazing work.
MY FRIEND THIS PIECE WAS INCREDIBLE PHENOMENAL CONGRATULATIONS FOR THE BEAUTIFUL WORK
Nah,he messed up on the knurling did you see? Right at the 6:00 minute mark.
I always wanted one of them.
If anyone is curious on the application of these split nuts. I use them at varying sizes to place under a baseplate of a mono-pole cellphone tower on anchor rods.
Easy. Spilt babbitt bearings are fun too. I hung up my tools.
Great work 👍 appreciated
Outstanding!!
Nice work!
Very impressive .the craftsman work, the editing. Top...
Wonderful!
That is a work of art
BRILLIANT ! ! !
Superb Quality of work !
Very nice job.
Espectacular trabajo.....es bonito ver trabajar de esta manera y ver el resultado .....gracias por enseñar estos trabajos tan meticulosos......saludos desde barcelona....👍
Got here by mistake , what a nice job , watched it all the way .
An artist!
Extremely talented machinist
Very skilled and educational video thanks and congrats 👏 😀
Awesome videos ! 👍
That zoom in at the start is crisp af
Great job. 👍👍👍👍👍
Amazing process
Yes sir. Well done.
Great work ❤👏👏👏
that was really good.
Freakin' awesome!
few a lot of work to make a beer can lifter for perfect height LOL Hes got like every tool in book ready to roll for like everything you could want to make! love it!
Fantastic work, dude! Nicely done! 😃
Stay safe there with your family! 🖖😊
Great work
well done!!!
Excellent!!
Bravo, bel lavoro!
i am amazed it's cool fit!
Fantastic!
AWESOME!
"DANGER, WILL ROBINSON!" GLOVES should be worn!
Never wear gloves when operating manual machines, especially a lathe.
This was amazing...
Very skillful 👍
Nicely done
Nice!
Es genial la pericias de un artesano ,me gusto el video
brilliant
Very nice work.
Very nice work and video.
Wow that was a great very nice work I really like this Technical work