P0299 BY FAULTY TURBOCHARGER BYPASS VALVE/ ECOBOOST F150 & EXPODITION
Vložit
- čas přidán 23. 07. 2024
- In this video I discuss how a failed TCBY valve, also known as a turbocharger bypass valve, caused a code P0299 "turbocharger underboost condition" to set in a 2018 Ford F150 equipped with a 2.7L Ecoboost. The valve got stuck in the open position causing turbocharger boost to be bleed off when the vehicle was not supposed to be doing so. This lead to the SES lamp illuminating and a lack of power upon acceleration.
Note: This situation can affect many of the Ford F150s and Expeditions equipped with an Ecoboost engine, 2.7L or 3.5L. And to my knowledge the 3.5L Ecoboost has been being used on the F150 from 2013 to present day, 2022. Also, the 2.7L Ecoboost has been used in later years on the F150 to present day. The Expedition equipped with the 3.5L Ecoboost can also be affected. I believe that the 3.5L Ecoboost has been in use of the Expedition from around 2015 to present day, 2022. The turbo systems on all of these vehicles are very similar and almost the same. However, there are some differences. So, as always verify everything.
GENERAL DISCLAIMER
Barbour's Auto Help is not responsible for any damage or personal injury incurred in the process of performing any auto repairs done by you the viewer. Automotive repair is extremely dangerous. Repair your vehicle at your own risk. It is the viewers responsibility to verify all information and procedures as outlined in YOUR REPAIR MANUAL AND OWNERS MANUAL FOR YOUR VEHICLE. Owning and using a repair manual suited for your vehicle is essential for correctly and safely performing ANY repair to your vehicle. Always wear safety glasses, protective gloves and heed all instructions for use applicable to any piece of equipment you may use. Due to circumstances out of the control of Barbour's Auto Help, Barbour's Auto Help makes no guarantee that by the use of the information given in this video a quality repair will be made. Barbour's Auto Help makes no guarantee that the information provided is totally complete, synchronized and accurate. Verify everything using an appropriate repair manual. Verify everything with your own research. - Auta a dopravní prostředky
i feel Very grateful, for doing videos like this brother, thanks so much for spending time and doing it, take care..
Amazing video! Very well detailed and explained. I appreciate the effort put into it.
Much appreciated!
I have a 2015 mustang ecoboost I replaced the whole turbo and boost solenoid intercooler sensor and intake Manifold sensor and I keep getting the p0234 and had less than 10pounds off boost then sometimes gets boost bit with some wear sounds coming from turbo like something hitting in there but it's new turbo need help to fix the over boost condition
hi thanks for helping people with this kind of videos , i wondering if
you just connect 12v to testing open and close please let me know many thanks
Great job
Thank you.
Do you have the size or part number for the 7mm screws??
Hello is there another name for this valve auto said its not in there system
I’m having the same issues finding this part
When u pull the valve does it leak oil? Do I need a pan? I’m probably about to have the answer
It shouldn't leak.
hello good video, but I have a question can someone help me please, my truck does not make that sound (I already installed the valve and filter) but it does not make that sound can someone help me please my truck is 2018 raptor ecoboost TT 3.5L
What sound? What’s the problem with your truck?
Also what filter are you referring to?
Do you know location of that Bypass valve in 2020 ford escape 1.5T ? I cant find any information about location. I have the part but not sure where it is. Pls help
Believe it’s rear of the engine between engine and transmission close to the air tube on top.
I have an underboost code showing for my 2016 2.7 and when it gets to higher speeds the orange wrench light appears and I lose my turbo completely. If I pull over turn the truck off the turbo works again. I brought it to the dealership i was looking at a $7000 turbo job but the turbos and waste gates tested fine. Long story short they put a wastegate silinoid in and it ran better than ever almost like a new truck for a week and it happened again. I’m gonna bring it back but it’s seems electrical and very difficult to track down. Anyone have this issue
Did you find the problem. My 2018 started acting up 3 days ago .also orange wrench with p0299 code .
Mine doing same thing
Did you ever find out what it was?
@azteca466 mine was bad cat converter.
Was blocked so no pressure code was showing for turbo..
I bypassed cat for now and had no problems no engine code or lights etc.
@@marckirby7356how did you bypass the cat?
це не f150 немає там такого прибора