How to Replace Starter 2013-2017 Honda Accord
Vložit
- čas přidán 12. 10. 2023
- Buy Now!
New Starter from 1AAuto.com 1aau.to/ia/1AEST00538
This video shows you how to install a new starter from TRQ on your 2013-2017 Honda Accord. The starter is a powerful electric motor that gets your engine to turn over when you turn the key in the ignition switch. If a motor has worn out or become damaged, your vehicle won’t start.
This process should be similar on the following vehicles:
2013 Honda Accord
2014 Honda Accord
2015 Honda Accord
2016 Honda Accord
2017 Honda Accord
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obrv/1AXAA00013
• 10mm Socket 1aau.to/obj2/1AXAA00017
• 12mm Socket 1aau.to/obFe/1AXAA00015
• 14mm Socket 1aau.to/obFe/1AXAA00015
• Ratchet 1aau.to/obIX/1AXAA00016
• Socket Extensions 1aau.to/obFe/1AXAA00015
• Torque Wrench 1aau.to/oaM4/1AXAA00044
• Gloves 1aau.to/oaoC/1AXSS00048
• Safety Glasses
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video. - Auta a dopravní prostředky
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Great video. Thank you for your time. Just a tip for those watching: If you have 2 long extensions, you can snap them together and get to the 2 bolts and the 12mm battery nut from the passenger side wheel well. Its a strait shot with a lot more room for the ratchet.
Nice video.
Most people watching this won’t have a lift. Some of the “easy” aspects of this process are easy only when the car is on a lift and you’re able to put both hands on the parts and tools.
A few suggestions:
1. If you try to get at this from either side, you’ll have to be good at working with only one hand. The angles aren’t practical for human arms. Instead, put the car on really solid jackstands, and come up under the front bumper.
2. During reinstallation, attach the battery cable (the one that tightens with a nut) *before* you put the starter in place. This will make it much easier to get the nut started, and will ensure that the rubber boot goes back on correctly.
3. Instead of hand threading the lower mounting bolt, slide a 4” long 1/4” ratchet extension into the lower mounting hole, and use that as an alignment pin. Then, hand thread the upper bolt (the really long one) at least 3 full turns. Remove the extension, and hand thread the lower bolt at least 2-3 full turns. Now you can use a ratchet on the upper bolt without fear of cross-threading, and finally tighten the lower bolt.
Beautifully done video. Folks, if you can't follow this to remove and reinstall your starter, you need a competent professional.
One of the main benefits of a video like this is showing how those connectors come apart. Every manufacturer thinks it needs to use a different form of connector for every electrical device, and even when the right tab is pushed or pulled, separating wires can be a giant pain.
This is Masterclass on how to make a video!! Step by step, everything explained in detail... THANK YOU VERY MUCH!!
Jesus this ought to be the easiest starter replacement I’ve ever seen. Way more confident now
You must be a really good mechanic. You make it look so simple. Great video , I'll try it tomorrow. Thanks.
Thank you! This helped a lot! I had a ton of issues removing the green clip at the beginning, it just wouldn’t come out! Had to break the little pieces at the end to get it out…
Also another thing that gave me issues was putting the 12mm nut back at the end. I couldn’t fit two of my hands under the car (basically working with one hand the whole time) so I had to use duck tape (The easy tear one) to duck tape the boot back as i try to screw on the 12mm bolt. 4 hours later, and it’s all good lol.
super easy thank you! anyone else struggling with that boot when trying to put back the ground cable, zip tie the boot back. helps a lot and saves time.
Followed the video and it worked like a charm. Very good guide!
Thanks for sharing this video. It was recorded in such a way I find no complaints about. Well done 🙏 god bless you brother in Jesus name.
+@TeacherofFaith-mt7jt Thanks for the feedback! 1aau.to/m/Shop-TRQ
so is there not a starter solenoid? or is that kinda like built into the starter
Good job thanks alot for the video one constructive critique put dielectric grease on starter connectors
are there different types of starter mounts ? my mechanic says the model I bought is wrong, even though it says it is the model for honda accord 2017 sport
Do you have to turn the flywheel or is that just for the V6 Accord ?
So are 33 pounds of torque for both bolts or just for the little one ?
I have a 2013 Honda Crosstour that needs a starter. I imagine its the same set up. I was about to make some calls to find a mechanic but your video showed how easy it is. I'll definitely be knocking this out this weekend. Much appreciation for this video
Ok. I'm stuck on trying too figure out where to screw In the boot. Some guy was taking offf my starter and it started to rain so he left.. I took the starter off now I'm not 100% on where to put the boot
How did you diagnose it?
What tool is that bro that drills the bolts in and out
Where is the black box that is right above the starter in your video?
Is it the same for the 2014 Hybrid Accord?
How much the cost?If somebody gonna fix it for me And how much does tartar???
Ok Dipstick, you forgot an important part. Where is the starter located
This is harder than I previously thought. Since I don't have the tools, I'm going to hire a mechanic to fix it.
+@veramann Thanks for watching our video! 1aau.to/m/Shop-TRQ
Did anyone have a problem with the assembly bolts being darn near impossible to get off? Not sure if they put lock tight on those muthas or what??? Good gracious!!
What’s the use of taking off a used part saying going to show you how to install a part when you put back the same part 😖
Bad video
I have a 2015 Sport 6 MT, is there a difference between an Automatic starter and a Manual? If so can you please direct me to where I can find the right one🙏🏼