592 is .5 lb lighter and is 7.6 hp vs 7.2 for Stihl. It's also a little cheaper. But then you have to consider the features and dependability. So really it's up to you.
Both saw are nice but the stihl got a muffler mod and you can clearly feel that improvement in power if you ever tried it on a saw which was stock before. So it's not really fair. Put them both in stock and the husky will overcome the stihl.
I own both of these saws STIHL 661 & Husqvarna 592 I do like switching around for different jobs The power is different Stihl 661 has better down low torque where the Husqvarna has more power up top at higher Rpm. They do have their good and bad points about them as you guys mentioned. I found the air filter isn’t any better than the Stihl small sawdust particles are getting through filter on 592 . I managed solve that problem with a bit of grease around the base of the filter. I am very happy to own both of these saws Stihl and Husqvarna 2 of best saws available.
You can tell you don’t have much experience with stihl caps. Ain’t nobody that’s used them that would take them over the husky caps. They’re leaky, they break, expensive when they do, and more picky about how you put them back in.
Nice video. I think both saws are monsters !! Right very few people will ever get a 3120 or an 880. Plus I’m sure it’s get old carrying a 125 cc saw after about 10 minutes.
I love the power in my mcculloch 125 and believe I'm going to be lost if it gose, power sure makes a big difference when cutting hardwood or anything big.
I picked up a 661c from a Guy who bought it for a job, before ge got the job. Have cut with the 32 bar but jut recently purchased a 25 light bar. Great comparison Guys!! Stay Hydrated and Have a Safe Day
I own some of both husky and stihl, one thing I really noticed is husky has better air filtration as you said, husky doesn't need cleaning as often as the stihl filters. My 500i has a similar air filter cover setup as the 661c and gets dirty quick. However the 462c platform I find is much better keeping the filter clean.
I have both saws and they're both top notch but if I had to pick one over the other I'd have to go with the 592 XP. Why? I Can't really put it into words except for the way it handles/feels when cutting.
Good video. I actually like the chain adjuster more on my Husky than my 661. I think the Husky design puts less stress on the adjuster than Stihl. And I do pick my bars up when tensioning.
Looked at a new 592 today the only thing i noticed is the inner dog spike top bolt mount looks like it could snap off easily, but im planning on buying one tomorrow and hope it lasts
Great info and thanks ! I have 10 ash trees with 36 inch ++ trunks and probably will get the Husky 592XP. Any recomendations on a good setup - chain, oil etc. ? Thank you.
Use minimum 90 octane fuel mixed with a good synthetic oil. I personally don't use rec fuel because it costs a lot more and has additives that I just don't need. Just make sure your gas has no ethanol in it. If you can't find any premium or mid grade gas without ethanol, then go with rec fuel. Three musts for a long chainsaw life: proper fuel mixture; clean air filter; sharp, properly adjusted chain.
Looking at purchasing a 661, the specs do not mention a bar over 30inches. I have seen one with a 36 inch on, and it still must run alright. Actually running a max bar on them, might be the difference, might be a good tell. When you are looking to buy one of them, Damn it is a hard decision, both pro's and con's..
Your comparation miss some details, what about price (brand new), maintenance cost during one year explotation or something like that, break down or malfunction during one year, price for spare parts it would all interested me if buy new one. Sorry for my English I am from Croatia. Thanks otherwise enjoying video.By the way I own Husqvarna 372 XP for 19 years and now considering a purchase of 592Xp
Those are some good point we can add in future videos. Definitely get yourself a 592xp! You won’t regret it, it’s an awesome saw. Thanks for watching and giving us your input. Your English is actually pretty good for being from Croatia!
Thanks for nothing guys, I’m still stuck on which one I “need” to buy. All kidding aside, appreciate you doing the review. The question is if you took the bark box off how would it cut and compare to the Husky, in other words stock out of the box on both says. Appreciate your hard work or play, whatever you call it 👍TCT
I don’t think the bark box really helps much. West coast saw claims up to a 5% power increase. 5% on 7.2 hp would be 1/3 hp more than stock. For us it’s more for sound that anything. Can’t go wrong with either one!
Just because it’s a new saw does that mean it’s supposed to be night and day better than the 661? 661 is a really good saw, I don’t think it’s possible to combine less weight and a ton more power into a saw that’s going to blow the 661 out of the water.
😂 I don’t think there is a clear winner, and I didn’t know which one would have the edge prior. I think it’s all in what feels best in your hand and the features the saw offers.
Until you start cutting 30"+ oak then the 661 shows the husky who daddy is plus the Stihl will always start better and they just keep getting better and better until they blow up unlike husky they get better until they get broke in and slowly lose power until they blow up.
@@redlinemotorcars2184 nowadays emissions kills everythink in europe and both theese saws are engineered in EU so its kinda sad like i would never imagined having restricted emissions on chainsaws . Anyway have a great day.
I can't stand Stihl caps . And considering that Husqvarna tends to have a better or equal saw for the price compared to Stihl im sticking with huskies for now.
Hi guys! Stihl is a German conservative company that creates tuff saws even for older people or beginners without sharpening experience. Husqvarna is a Swedish progressive company only for experienced users. Here in Greece we say Husqvarnas broke only cause of the wrong sharpener.
Get a ripsaw 592xp they make the best saws hands down. They port it do a custom exhaust advance the timing ect better clutch it is so high reving it slings wood like mad. The husky from ripsaw is just whicked. I love mine it tears ass.
Stihl makes up to date saw. Then they leave the 80's air filter on it. I bought a 661 yrs. Ago. 5 th. Tank of fuel shut off . Stihl tells me to take to dealer. Dealer charges $20 to hook up to laptop. (WTF)!!!!! FOUND OUT stihl had a whole lot of bad mtronic systems. Local dealer knew. THEY KEEP QUIET about it!!!!! 592 ALL THE WAY.
How is this really a fare comparison the stihl has a bark box on it and anyone that noes anything about saws no the bark box is good for 1/2 hp or more that’s a big deal
We didn’t notice any power difference when we put the bark box on, we just like the sound. west coast saw says up to %5 power increase. But if a 70$ bark box is the deciding factor on why you buy a saw because it will make a lot more power than sounds like the stihl is the best bet for you. They both make a ton of power and even with the bark box I’d give the power edge to the Husqvarna.
![STIHL 500i Takes On a 661 MAGNUM [Rapid HEXA Chains] VS White Oak](http://i.ytimg.com/vi/m7B7Cbp6rBg/mqdefault.jpg)
I own both. The 661 is collecting dust.
Can't beat the husky air injection, it works
Nice job guys! Both really great saws!
That was a nice introduction of the 2 saws,
I run the 592 for over a year. Id suggest tightening all the hex crews or check them every now and then. Awesome saw.
I run mostly stihl including the ms661c. I stihl keep a 395xp at the ready, nothing can handle a 36 inch bar better.
592 is .5 lb lighter and is 7.6 hp vs 7.2 for Stihl. It's also a little cheaper. But then you have to consider the features and dependability. So really it's up to you.
In these demos, the Stihl definitely bogged down more as if running rich.
Both saw are nice but the stihl got a muffler mod and you can clearly feel that improvement in power if you ever tried it on a saw which was stock before.
So it's not really fair.
Put them both in stock and the husky will overcome the stihl.
Maybe the muffler mod added a little power, I think the 592xp has the edge over the stihl anyways.
Both are fantastic pro saws, I'm a husky guy, but giving a MS660 a go, sweet! great job fellas!
Thanks!
So sorry it took me so long to subscribe!! I thought I had long ago. Great video both great saws!!!!
Thanks Chris, it was great meeting you!
I would like to see a view of the 395xp and those two saws with a 36in bar
I own both of these saws STIHL 661 &
Husqvarna 592 I do like switching around for different jobs
The power is different Stihl 661 has better down low torque where the Husqvarna has more power up top at higher Rpm.
They do have their good and bad points
about them as you guys mentioned.
I found the air filter isn’t any better than the
Stihl small sawdust particles are getting through filter on 592 .
I managed solve that problem with a bit of grease around the base of the filter.
I am very happy to own both of these saws
Stihl and Husqvarna 2 of best saws available.
Thank you for watching and giving us your thoughts, they are both great and to have both is awesome!
You can tell you don’t have much experience with stihl caps. Ain’t nobody that’s used them that would take them over the husky caps. They’re leaky, they break, expensive when they do, and more picky about how you put them back in.
Nice video. I think both saws are monsters !! Right very few people will ever get a 3120 or an 880. Plus I’m sure it’s get old carrying a 125 cc saw after about 10 minutes.
Agree, I think the powerhead on those saws is 22 pounds.
I love the power in my mcculloch 125 and believe I'm going to be lost if it gose, power sure makes a big difference when cutting hardwood or anything big.
I picked up a 661c from a Guy who bought it for a job, before ge got the job. Have cut with the 32 bar but jut recently purchased a 25 light bar. Great comparison Guys!! Stay Hydrated and Have a Safe Day
The Triplet’s strike again 🪵⛓🪚 Two great saws 👍👏🤩 Rick
I own some of both husky and stihl, one thing I really noticed is husky has better air filtration as you said, husky doesn't need cleaning as often as the stihl filters. My 500i has a similar air filter cover setup as the 661c and gets dirty quick. However the 462c platform I find is much better keeping the filter clean.
Both good saws. I like to try out one the new auto tune saws and the 500i
We run the 500i vs other stihl saws in upcoming videos!
I have both saws and they're both top notch but if I had to pick one over the other I'd have to go with the 592 XP.
Why? I Can't really put it into words except for the way it handles/feels when cutting.
I agree!
If you have a stihl you need to add the maxflow and suspension kit or the barkbox by itself isn't enough.have this on all my stihl saws
I prefer stiyl but I really really like husqy ,I own both.
Good video. I actually like the chain adjuster more on my Husky than my 661. I think the Husky design puts less stress on the adjuster than Stihl. And I do pick my bars up when tensioning.
And 592 has more power than 661. In this video 661 had bark box modded muffler
Looked at a new 592 today the only thing i noticed is the inner dog spike top bolt mount looks like it could snap off easily, but im planning on buying one tomorrow and hope it lasts
You’ll love it!
661 has muffler mod...husky is stock
Nice work video
They love to rock the saws--keep full bar-chain in the wood--cut better
Husky man myself love the 592
Great info and thanks ! I have 10 ash trees with 36 inch ++ trunks and probably will get the Husky 592XP. Any recomendations on a good setup - chain, oil etc. ? Thank you.
I like the stihl brand chain, ams oil saber mixed with 93 octane rec fuel, and whatever bar oil you like. Thank you for watching and commenting.
@@765Guys Thanks!
@@Mike-wh9dq hope it works out well for you!
Use minimum 90 octane fuel mixed with a good synthetic oil. I personally don't use rec fuel because it costs a lot more and has additives that I just don't need. Just make sure your gas has no ethanol in it. If you can't find any premium or mid grade gas without ethanol, then go with rec fuel.
Three musts for a long chainsaw life: proper fuel mixture; clean air filter; sharp, properly adjusted chain.
Looking at purchasing a 661, the specs do not mention a bar over 30inches. I have seen one with a 36 inch on, and it still must run alright.
Actually running a max bar on them, might be the difference, might be a good tell.
When you are looking to buy one of them, Damn it is a hard decision, both pro's and con's..
Can’t go wrong either way!
The Stihl is better regarding dirt accumulation around the leaky oil cap!
Your comparation miss some details, what about price (brand new), maintenance cost during one year explotation or something like that, break down or malfunction during one year, price for spare parts it would all interested me if buy new one. Sorry for my English I am from Croatia. Thanks otherwise enjoying video.By the way I own Husqvarna 372 XP for 19 years and now considering a purchase of 592Xp
Those are some good point we can add in future videos. Definitely get yourself a 592xp! You won’t regret it, it’s an awesome saw. Thanks for watching and giving us your input. Your English is actually pretty good for being from Croatia!
Stihl Ms661💪👌👍👍
Mandatory..for stihl saws. There's reason for gordy makeung them.its needed stock stihls set up is no go
A suggestion for video is to check the levels on audio, they are rather off. Otherwise good video!
Nobody said anything about the antivibe, I was curious which one had the better AV
Husky
I’ve always hated the Stihl caps, more picky to lineup compared to husky, husky is also a lot more comfortable to run for anti vibe
Agreed!
Thanks for nothing guys, I’m still stuck on which one I “need” to buy.
All kidding aside, appreciate you doing the review. The question is if you took the bark box off how would it cut and compare to the Husky,
in other words stock out of the box on both says.
Appreciate your hard work or play, whatever you call it 👍TCT
I don’t think the bark box really helps much. West coast saw claims up to a 5% power increase. 5% on 7.2 hp would be 1/3 hp more than stock. For us it’s more for sound that anything. Can’t go wrong with either one!
@@765Guys I really appreciate you doing this review.
Now the hard part is picking one out. Thanks again!
Keep those videos comin! 👍TCT
This was my thought during the video as well. Would have loved to see them stock versus stock but let’s face it, the 2 best 90cc saws on the market.
@@woodruffwoods we’ve run the Stihl saw stock, it shreds with the stock muffler cover, I don’t think it added any power, just sounds cool.
The 661 is a little over 91 cc
Surprised that the 592 wasn't hands down faster from the hipe.
592 is a powerhouse, the 661 is right there with it!
👌👌👌👍👍👍
The husky has more orange on it, so clearly the winner. Fun shootout.
That’s exactly what I was thinking but I didn’t want to sound like an idiot…
They are both nice chainsaws
Definitely, I’d be happy with either one!
I would be a little disappointed in the 592 considering it's a new saw and the 661 has been around quite a while now
Just because it’s a new saw does that mean it’s supposed to be night and day better than the 661? 661 is a really good saw, I don’t think it’s possible to combine less weight and a ton more power into a saw that’s going to blow the 661 out of the water.
@@765Guys661 is bark box muffler, no good comparision
Let's be honest here, we all knew the husky was going to beat the stihl.
😂 I don’t think there is a clear winner, and I didn’t know which one would have the edge prior. I think it’s all in what feels best in your hand and the features the saw offers.
Emissions kill the Sthil but a few easy changes put it on top.
Until you start cutting 30"+ oak then the 661 shows the husky who daddy is plus the Stihl will always start better and they just keep getting better and better until they blow up unlike husky they get better until they get broke in and slowly lose power until they blow up.
@@chadklaren9537 I definitely think the old 066/660 would stand on it's own two legs against the 592 but the 661 just doesn't port as hot as the 592.
@@redlinemotorcars2184 nowadays emissions kills everythink in europe and both theese saws are engineered in EU so its kinda sad like i would never imagined having restricted emissions on chainsaws . Anyway have a great day.
Who cares? They are both pretty good saws. I'll take a nice 394 and an earlyish 066 anytime tho
I can't stand Stihl caps . And considering that Husqvarna tends to have a better or equal saw for the price compared to Stihl im sticking with huskies for now.
Husqvarna air filtration is light year ahead of stihl as well..
Like see them cut some 2x6 and 2x8 and 1in for home are fast to do job with 45 in bar
592xp, mais tem o 361 sthil
Every little kid knows the husqvarna is the better saw 😅
What size bar was on 592?
25” bars on both, brand new stihl chains on both.
@765Guys thank you, the 592 come with 24" in uk with c85 chain. Most things I could use 24/25, you think that be OK?
@@stevenwilson8078 yes, 25” is very versatile and that’s what I keep on it 95% of the time, I have a 32” for the big stuff and it pulls it no problem
@@765Guys awesome, thank you for your time. Appreciate it.
@@stevenwilson8078 no problem, thanks for taking the time to watch and comment.
Hi guys!
Stihl is a German conservative company that creates tuff saws even for older people or beginners without sharpening experience.
Husqvarna is a Swedish progressive company only for experienced users.
Here in Greece we say Husqvarnas broke only cause of the wrong sharpener.
Flows a lot of fluids 😂😂😂😂
Not talking shit just thought that was funny
Glad someone found some humor in the video🤣
I've got that 592 XP and it will beat anything there's nothing better
Muffler mod sthil .....hus not muffler mod..
592 looks nicer
I think it’s looks more modern.
non perfettamente affilate
Get a ripsaw 592xp they make the best saws hands down. They port it do a custom exhaust advance the timing ect better clutch it is so high reving it slings wood like mad. The husky from ripsaw is just whicked. I love mine it tears ass.
I'm glad I bought the Husqvarna.
I'm also glad I'm not subscribed to your channel.
Me too!
Stihl makes up to date saw. Then they leave the 80's air filter on it. I bought a 661 yrs. Ago. 5 th. Tank of fuel shut off . Stihl tells me to take to dealer. Dealer charges $20 to hook up to laptop. (WTF)!!!!! FOUND OUT stihl had a whole lot of bad mtronic systems. Local dealer knew. THEY KEEP QUIET about it!!!!!
592 ALL THE WAY.
That sucks, luckily our 661c has been a good saw so far.
No cambio por nada mi motocierra Stihl ms661 una bestia en el bosque
No one likes the stihl caps
I like Stihl caps
How is this really a fare comparison the stihl has a bark box on it and anyone that noes anything about saws no the bark box is good for 1/2 hp or more that’s a big deal
We didn’t notice any power difference when we put the bark box on, we just like the sound. west coast saw says up to %5 power increase. But if a 70$ bark box is the deciding factor on why you buy a saw because it will make a lot more power than sounds like the stihl is the best bet for you. They both make a ton of power and even with the bark box I’d give the power edge to the Husqvarna.
@@765Guys lm a stihl guy but I noticed when I see a payed hack or a fanboy pushing bullshit ,
592 xp in this video is more faster than 661. And uout 661 is modedd😂. Husky winner
The husky’s crank bearings with be shot under 500 hours guaranteed