The [ULTIMATE] Silverado Stereo System - Sony AX7000 + Kicker: Interior Build Pt. 3
Vložit
- čas přidán 27. 08. 2024
- 2007 Silverado - Custom Sony AX7000 with BUILT-IN AMPLIFIER installation with Full KICKER SPEAKERS and Kicker 10" Comp Subwoofer. Doors with full Dynamat coverage! This thing BUMPS and is SO CLEAR! Mind. Blown.
Mahalos from the Lonestar Hawaiian Garage!
Professional Inquiries: LSHawaiian@gmail.com
Follow on Instagram @Lonestar_Hawaiian
NOW ON TIK TOK: @Lonestar_Hawaiian
Interior Build Part 1: • Fixing 07-13 SILVERADO...
Interior Build Part 2: • Sound Deadening EVERYT...
Like my Garage? Check out the full Build Here: • Building a DIY Showroo...
Sony digital multimedia receiver (seen in video): www.crutchfiel...
Kicker Speakers (Front & Back): www.crutchfiel...
NCS Music:
Track: Egzod & Neoni - The Revolution (Arc North Remix) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: • Egzod & Neoni - The Re...
Free Download / Stream: ncs.io/TheRevol...
Aloha
#Silverado #Sony #Kicker
![Silverado Custom CARBON FIBER Trim [So Satisfying] - RVinyl Wrap: Interior Build Pt 4](http://i.ytimg.com/vi/eAhtug3VIL0/mqdefault.jpg)
![Silverado Custom CARBON FIBER Trim [So Satisfying] - RVinyl Wrap: Interior Build Pt 4](/img/tr.png)
Ahh. Dynamat. Brings back memories of my early 20's.
Yes it does. Especially at $20 a sheet. And would cut tiny pieces to stretch it out. Lol
It great seeing the OG Silverado getting some love
I admire anyone who does their own work....I admire someone even more when they do my labor for me.
No Matter what brand is used...This "Ha-y-N Cowboy" did his research & got what he felt suited him. Clean installs is key for clarity.....Maika'i Kanaka!
ALOHA & MAHALO NUI!!🤙🏽
Mahalos 🤙🏽🤙🏽
Dork
I gave my 2011 Silverado the same stereo treatment several years ago and it was the best thing I have done to the truck. My head unit has wireless carplay and is fantastic. BTW the word for the screen you were talking about is "capacitive" touch screen. Great video.
Should have covered all the large service holes in the doors. Also put the dynamat on the inside door skins. It’s absolutely a must. If you cover the holes you get a much better bass response and much less outside noise.
I wanna do same to mine but these years chevys were notorious for water getting past window seals and would hold water if fully sealed. Plus I do alot of mudding and offroad but think I'm gonna stop doing that and get the ole 87 going again
I have always put hushmat. On inside of the door panel on the outside door skin behind the speaker itself and I have always loved the quite ness of my projects I have done
Been watching channel for some time now and do enjoy the content. For this video I felt like I should offer some pointers:1. For optimum sound quality, would be best to also apply sound deadening to outer door skin. 2. Instead of electrical tape, order some Tesa tape.
Keep the content coming.
I’m running the same things radio and speakers in my 14 Sierra. Absolutely love it.
That’s the exact Sony head unit I am using and I as well got it from crutch field it works awesome
Crutchfield rocks!
Much respect for taking a shot at it on your own! 👌🤘
Pac audio rp5-gm31 is the correct aftermarket harness you should be using for your model truck when switching to an aftermarket radio. It does all the data communications for the gm lan networks (data communication wires that run through factory radio), has factory accessory for your radio, and retains your door chimes. Highly advise using that harness, especially when doing a clean install like this. Nice work though! Good stuff on finding those accessory wires
Do you have a place to go to find the right harness needed for other cars too?
Now you just need to get rid of those baby trucks and get you a dirtymax!
I was thinking the same, but Cummins,.
Love the OG Silverado
Seeing that smile on your face reminds me of when I put my subs in. Awesome video looking forward to what’s next.
Thank you for posting this. I threw a bunch of walmart Sony Guts in mine haha..not bad.
Hey there! Just a pointer for you in the future or your subs, but for an extra $20 bucks Crutchfeild will make a plug and play wiring harness and it makes everything so much easier and it is 100% worth it, if you sell the truck and want to keep your radio the stock will still hook up.
Thanks for the tip!
If you install sound damping mat on inside of door with the fast rings for door speakers it will make a dramatic difference.
15:20, I saw common kings radio and in my head “Yessah”
Love watching your vids honesty havnt in a while and just was looking up audio videos and came across it. Somehow always come back tto your channel always good content 👌💪
I have a 2011 extended cab like yours and one thing i really wanna do is take dash out and completely wrap to be like the newer trucks with padded vinyl or w.e it is.
Had that issue with the accessory wire and I used the clock wire on a second gen Tacoma!
Pretty awesome. One thing you could added was the boom mat. It's basically a foam box for the door speakers helps with mid range bass. I have them paired with my jl audio 6.5 and it's more bass than I thought
Wow Man i like so much your videos and most the positivity you have for every brand new day, So wish you all the best with your HapPy Work.... You are really blessed 🤗
You know.... an interface module would have made life easier.
Any suggestions on where to get the module for this particular head unit
Bit late to the party but to find an accessory on power source theirs a blank pin on the bcm distribution block by your left foot under the cover that you can put a spade connector on which is where I ran mine from
Stoked on this one!!
Throw a 500 watt- 100 watt amp and a simple 4 gauge-8 gauge wiring kit on it. Your sub will burn out so much quicker as it sits right now.
Also if you wanna get extra, you can throw a amp on your door speakers and make them even sound better
I missed one lol..... Salute, always life motivational.
Love watching your videos my man, to me you’re like the Hawaiian MacGyver because how you figure things out! Aloha.🤙🤙
Hey bud! Nice job on installing the sound deadening materials! I was watching closely on when you hooked up the amp, I noticed that you didn’t install a fuse from the battery to the amp. Probably should take a look at that….. and installing the correct gauge wire to the amp is also important as well. Crutchfield is an excellent source to help with that. Other than that, nice job!😊🍻👍
Thanks for the tips!
@@LonestarHawaiian whats the name of the paint of ur truck? or did u repaint it?
@@Jabez.21 It's a "Dark Ming Blue Metallic" original OEM paint.
@@LonestarHawaiian lol wow u reply so fast w manz but uh do yk the paint code? i actually have a cateye n im tryna paint it and I really liked the paint from ur truck.
The acc switch is by the gas pedal .... you can tap the wire there so when you shut the truck off it can stay on until you open the driver door its late and i hope i explain it well enough lol
What I used to do for carpet when I pulled it all the way out like that, use a pressure washer outside and then let it dry in the sun and it’s brand new
Pac rp5 gm31 is what ya need to retain steering controls. Gives you acc and navigation outputs.
Let me tell you something. I have thought majorly about doing a interior rebuild on my 2011 Silverado. Didn’t know who would be interested or if it would I be a hit and I’m kinda sad I didn’t do it ☹️
Next time use an Idata link interface and replace that Sony with a Kenwood, top it off with the proper gm harness kit and it's plug and play once you solder the harness kit to the head unit wires. No need to run extra power wires. Pro tip if you use Kenwood, you don't have to deal with the pesky vss (green wire) if you have DVD. My kids can watch movies while in motion.
Did you connect the yellow wire from the head unit wire harness, straight to the battery with a in line fuse?
Glad to see you doing some great upgrades,id like to see you dye the headliner black next, it would complete the look I think you are going for...
Looks sick my guy!
You had me up until 11:50.....and the Oscar goes to.....
This makes me appreciate the Bose system that came in my 08 a lot more, my friend had that same head unit in his truck and it was great
I have the same bose but one went out and I’m sad about it I don’t know where to get another one.
The Bose system sucks
@@tacos1308 did you try one of the gm parts sites? Or maybe a dealer could get it for you
@@zackbell4045 I’d have to check but l update you
Very cool
A Hawaiian Texan... I have found my brother in arms
not a jealous man but that garage! lol
I have the same head unit in my 07 with JL speakers. I found with mine that with high volume it would shutdown. Ran power and ground direct to head unit. Same issue. I found that with the pac31 interface for onstar you have to bypass speakers wires and run them direct to the speakers. The interface can’t handle the power.
I hooked my acc wire to the misc Ignition fuse under the hood but will probably relocate it.
Theres actually an adapter to make aftermarket door speakers fit properly! That's definitely good to know lol. I got 2 self tappers holding mine in rn 😅
the only annoying thing about hooking the radio up to that power source is that the radio turns on, back off and then finally back on when you go to start your car after accessory mode
Could you give an update on the head unit? Pros and cons? Thanks
Love the interior work! Makes me want to redo my 08 LTZ. One question on the radio though, why didn’t you want to wire it up so it stays on for the 10 minutes or so after the key is turned off?
Get rid of those 6.5 kickers and get ds18 red tips for 10$ more but really worth it loud and good sounding speakers
Nice job mate but I didn’t see any sound deadening go in the inner door skins. Cheers 👍🦘
Noone can hear, what you will lisening in the car. I was, few years ago, put in my old Lancia kappa turbo, audio sistem for competition. To much strong and put lots of akustic folies in car. But its nessesery if you want butyfull sound. I have compression sub, Infinity and 10 speakers. In my Chevrolet too, I was put sound system and sub, red line Ground zero,. But... I am one audiofil and like good sound 😁 , so... I am so glad, you are happy!
You definitely are gonna want a mono amp for that woofer man. There is no filter on the rear speaker outlets from the receiver for one. The frequency response of that woofer is probably only 30-300hz. 2 if you try and turn it up high on the unit to get more output you will definitely distort and possibly blow that woofer. Get a nice 300 watt amp and learn how to gain set the amplifier. Not trying to be a tool, but just want to save you the headache. To run all 4 speakers and a subwoofer off of a single din receiver is asking a lot of the receiver so maybe even a nice 5 channel amp to leave room for expansion.
Thank you for the comment and your knowledge. Super helpful! 🤙🏽
So happy for you now that it's almost completely done. I bet your super pumped with the final results! Take care and I'm looking forward to the future ZL1 upgrades?
You should try a kenwood head unit
How much matting did you use? Car Play has to be connected via USB right? If so is there a way to run a USB through the back and up through the center console to avoid a wire hanging out the front of the unit?
Do you still have those morimoto headlights because I would love to buy those off of you. I have an 07 silverado and is in need of a major headlight upgrade
I watched a few episodes trying to figure out What lift you running? What all came In the lift kit? Thanks!
Waited a whole weeks
If you're in North Texas you should come out to Ennis 5/2/2021 Bluebonnet park for the Bad Boys on The Street Audio show. You'll be able to hear much better audio than kicker.
🤙🏽🤙🏽
you need a lifted tacoma my brada. awesome cars tho, and great video
Did you get the iDatalink Maestro Rr to intracellular the radio with the truck. It's highly recommended. Also, ground the parking brake wire from the radio so you can play video anytime.
Yooooo, there are new Silverado Headlights available... full led headlights and they resemble the new headlights. Take a look at them!
yessah
Just bought a truck 02 Silverado gotta replace the front left speaker so I’m changing both of the fronts ofc but I also wanna change the head unit but idk what to do on a budget
There is a separate kit you can buy from Idatalink..if you have factory steering wheel controls. Crutchfield should have offered or recommended a wiring harness that would solve all the wiring problems. I did the stereo in my 13 all alone..
Oh, im also rocking 2 10s with 1500watts in mine, and I like that it's contained in the truck, not heard 2 miles away. Though I am seriously digging the idea of a full dynamat install on the interior🤔
I wish I had your skills. I know tons about car audio. Now if I knew how to do what u do installing everything I would save thousands on paying people to do it.
What about C comers already know putting lighter interieur
So why didn’t you but a small sheet behind the door speakers on the outer skin from inside the door
Nice choice in equipment! I put the Sony XAV-AX210 with iDatalink Maestro Rr and Rockford Fosgate speakers in my 2012 Silverado.
I have an LS, same as you.
Will be doing the radio upgrade as well.
Been looking at the modern Sony xav-ax7000.
Wish you had the steering wheel controller, wondering if I'm gonna lose that trying to upgrade.
6 1/2 " components! Dedicated midbass & tweets, your gonna love it my boy!!! kenwood/ Pioneer the better components!
But yeah anything with some power beats the hell out of factory equipment!
I put those Ds Kickers on my homies bike.... they hump... it seems like a bit of over kill with the dynamite for such a small system though
Did you fix the annoying little rattles in the front door panels of your crew cab? my 2021 went right back the dealer
Mine is doing the same shutting off and turning back on problem at high volume can you help me?
What wiring harness did you use and clip for mounting the radio?
Hey buddy hope you’re cookin up a new video for us this weekend!!!
In the works!
I missed it, where did you tap in for the acc for the radio ??
Yeah you forgot one of the most important areas to cover, behind the speaker on the door skins 😬
Any thoughts about color changing the headliner ?
The wires were supposed to go directly from battery to the amplifier not the deck! 😮 Nice setup though.
Good luck with the Walmart Kickers, I added them to my Silverado and only lasted 10 months
I'm interested in the sound reduction. Did you get to measure dicibels before and after in the truch driving down the road? Thanks
you better wire the radio up using an interface module. your going to have computer issues hard wiring a radio like that.
Do not wire your truck like that. Do not run a sub off the deck. Run 4g power thru firewall to a kicker 300.1. Use rcas from radio to amplifier.
Thats normal boot up operation. Just wish you wired it correctly
1:02 damn your wife drives crazy bro!!!🤪hope the kid's got their seat belts on tight
talk about your gym set up
Question: how did you connect all speakers to the radio, 100x4 you have 5 speakers?
Great Video! i Would like to know, if you are still using this set up in your vehicle? I recently bought this stereo for my hatch back. I have two 8 inch rockford fosgate p2d2 subs with 250w rms and S Skar 6.5 mid ranges and polk db 1001 tweeters on my both front and rear doors. I would like to know, if this set up works with the stereo using direct connection method? Also did you use any fuse block when drawing power from the battery direct to the stereo? Do let me know your thoughts? Thanks
whats the name of the paint of ur truck and also uh is that factory paint or u repainted it?
did you connect the chime for when you open de doors and the turning signals are on?
Can you use the steering controls for the head unit?
Hey so I’ve been rewatching this video trying to learn from you, and I have so thank you for that! But I have a question, do you noticed the heat staying out of the truck or does the truck get hotter now that you have the sound treatment on?
I have a question. I'm getting ready to replace the speakers in my 2008 Silverado. While I have the doors pulled apart I going to throw on some killmat. Did you replace the factory vapor barrier once you were done?
Needs tint!
Questions I have xm is the head unit xm ready
can you please tell me what headlight lenses those are. i have looked and looked.
All the details on those headlights in this video here 🤙🏽: czcams.com/video/VbQwzrGaRc8/video.html
What kind of wiring harness did you use for the radio?? Great vedio btw!!