2010-2017 AUDI Q5 STEERING SHAFT REPLACEMENT.
Vložit
- čas přidán 29. 08. 2024
- This video shows how to replace the steering shaft on a audi q5. It's a very common problem that causes stiff steering
If you would like to help support this channel please take a look at these tools I recommend and use daily.
Streamlight usb rechargeable pen light (affiliate link) amzn.to/3GxgWtl
Automatic noise cancelling ear protection (affiliate link) amzn.to/3Q7ZiPZ
Reasonably priced metric wrench set. (affiliate link) amzn.to/3GvIkHV
Excellent 1/2in drive split beam torque wrench (same as snap on) (affiliate link) amzn.to/3Z5qu67
Thank you and thanks for watching
www.buymeacoff...
You’re a real lifesaver. Thank you
Thanks man!!
You made me save over 900€ of labor work by Audi Dealer thank you a lot I dir myself and omg drive it like brand new. Thank you 1000times 🎉💪🏻
That’s awesome! So happy it helped you out
Awesome Video thank you.
Great Video! I have a 2009 Audi Q5 . I have a bit a play when i turn left and right with a slight vibration when i drive . Feels a bit jumpy . Hard to explain. Any idea what it could be ?
My steering is off be about 30 degrees and my ecs light is on due to steering being off. Any way to fix it?
Nice presentation, can the intermediate steering shaft damage the steering rack module?
I’ve havent seen that and can’t picture how it could really, do you have a issue with your steering gear?
@@EuropeanAutoRepair The steering wheel is hard to move left or right, the steering shaft end is rusted. I was first told it was the steering rack and now I'm told it's perhaps the intermediate shaft. Neither have been replaced yet. Don't know what to believe anymore. The only warning indicator was "engine light" on. Any ideas?
If you just pull the one pinch bolt off the bottom of the steering shaft you can slip the u joint off the steering gear and feel if it is seized, if the steering is difficult and easier through the rotation it’s likely the shaft, the intermittent shaft is much more common of a problem
Thanks...but here's some additional info. It makes that "scraping" noise when standing still when you turn the steering wheel right or left. No noise if you're driving straight...only when turning. This is a real issue for me so would appreciate some additional help.
Did you already verify the front coil springs aren't broken?
@@EuropeanAutoRepair My husband looked and said they didn't look broken. Could something be "rubbing" that we can't see?
@@shirleyschroeder2351 Yeah I've seen a failed ball joint cause some rotation squeaks too. Might be worth having a local independent shop taking a look at it
Sehr gut
Nice video! For the Q7, are the procedures pretty similar?
czcams.com/video/fm87mA_SFwg/video.htmlsi=leqmWMnuD7ZZQHVr
Make sure you don’t have something like this going on
Thanks for that lead. Are they similar is the question though? I have an issue where my 2017 Q7 gets stiff and loosens when it wants while turning.
They are a different design but still utilizes u joints so it is possible tho not common on that model, more common to have those damaged wires causing stiff steering on that model
@@IWillBeAMillionair I had the same problem on my Q7. Before replacing the parts, You may try the following:
1. spray a lot WD40 on the u-joint (the lower one), and turn the steering to the left and right limit, then spray more WD 40 again to clean the rust and dirt.
2. Wait for several hours, spay white lithium greases and turn the steering wheel till the u-joint is covered with grease.
After doing this, my Q7 is as smooth as new.
Was your steering hard when the car was on my steering is hard when car is on
Yeah it’s usually hard and then easy depending on the position of the steering wheel
After replacement do you need rest or recalibration of steering angle sensor? And what happens if you don't lock steering wheel during the process.
No recalibration required, as long as the steering wheel doesn't spin with the rod disconnected its OK. If it does you may damage clock spring
Should need steering angle recalibration, they are made very accurate. If you don't lock the wheel and loose position of center you can damage the clock spring
Torque specs for the bolt good sir? Thanks in advance.
30nm and 90 degrees I’m pretty sure
My steering will not move completely, my steering light is on, would this be because the steering shaft needs replaced?
My steering wheel is hard to trun on my audi a4 and the red steering wheel ligth is on can I replace this part and will it fix my problem
@hinojosavictor if your steering light is on that indicates a fault in the system, this part will likely not fix it, have the vehicle scanned or purchase a scanner and scan it yourself
@@EuropeanAutoRepair thank you ill sure will do that
@hinojosavictor the scan tool on Amazon called topdon topscan will talk to all the modules on that car and it’s pretty reasonably priced
Question, will this cause your power-steering light to come on in the odometer ?
Nope it shouldn't
I've got a little play in my steering wheel will that be the cause ?
Usually doesn't cause play from what I've seen. If the ujoint became loose it could
My steering occasionally makes a “knock” sound that I can feel in the steering wheel when slow turning like in a parking lot or driveway. Would this fix solve that issue?
Probably not
@@EuropeanAutoRepair ok. I thought maybe one of the joints was binding then making that knock sound when it unbinded. Any idea what it might be then? Appreciate your help.
What model is it?
@@EuropeanAutoRepair 2011 Q5 3.2
@@rickc9672 Make sure you don't have a broken front coil spring or anything like that. If not it may be a control arm issue. If you hear a rotation clicking with the wheel turned at low speed more then likely a front outer cv joint is failing. Check for torn boots
My 2015 Audi Q5 has a "scratching" noise whenever I turn the steering wheel left or right. Could this have something to do with the steering shaft also?
If I had to guess id say no. Normally the way they fail no noise is associated with the problem. Check for broken front coil springs
@@EuropeanAutoRepair Actually, it's a common issue for Audi Q5/SQ5 to have "squeaking noise", because of the shaft is rubbing the sealing rubber, there is an Audi TSB for it. My 2016 Q5 had the noise when it was only 5000 miles. Audi dealer sprayed some grease in it, a few weeks later the noise came back. Then, the dealer replaced it under warranty. A year later, the noise gradually came back, and didn't bother to replace it again. I'm getting used to it, but it's annoying. Now, I'm thinking of replacing it myself. Thanks for the video.
It's funny I had a Q5 come in last week with that squeaking from the steering grommet, it was a few weeks after the dealer replaced the steering shaft, I played with the positioning of the grommet on that bearing and seems to have taken care of it.
@@EuropeanAutoRepair Just found the TSB: static.nhtsa.gov/odi/tsbs/2015/MC-10130705-9999.pdf It seems to cover most Audi models. Would love to hear your opinion about the best way to prevent the noise from coming back (it's a matter of time for the noise to appear even with a new one.)
My wheel doesn't return to center after steering, could this shaft be the reason?
It might be. Is it a q5?
Could it also be the angle sensor so
I've never seen the angle sensor cause stiff steering on these models
How much would a mechanic charge for this job (parts and labor)? ball park.
Id guess 300 dollars labor and not sure parts pricing
What size is that T-bolt?
10mm triple square