Dual Vise Stand Build
Vložit
- čas přidán 27. 05. 2015
- In this video I show you the steps I took to build two vise stands. This is a repeat video but for entertainment purposes I thought what the heck. I'll shoot and post it. As always, feedback is welcome. Hope you enjoy the video.
You can support the channel buy using our Amazon affiliate store. It doesn't cost you anything but we get a small percentage of the purchase for sending you over to Amazon.
Part Time Fab Store
www.amazon.com/shop/influence... (Affiliate Link)
Thanks for watching and your support.
Website: ptfab.net/
Instagram: / part_time_fab
Facebook: / parttimefab
MUSIC:
Media provided by BillWalker/Pond5.com - www.Pond5.com/
LOGO:
Media provided by gorbovoi81/Pond5.com - www.Pond5.com/
#welding #migwelder #mig #fab101 #fabrication #welding #migwelding #metalwork #shoplife #jobshop - Auta a dopravní prostředky
Great work! They look awesome. I drive an 18 wheeler for work. I seen one of these 18 wheeler hubs sitting around the shop and the mechanic let me bring one home. I thought it would be a perfect bench grinder stand. Will be making it soon.
I just adjusted the audio, I thought it was fun, didn't bother me a bit, I was too wrapped up in welding skills. I have welding equipment but need lots of practice! GREAT STUFF
I congratulate you, you are a great cutter, welder and you have good ideas, ideas that serve.
Thank you Jaime
Great work !! You really go the extra mile to do a neat job . Keep it up and God bless !!!
Ray Eddy 9
PTF, that was very cool. and great video man ,thank you for taking the time to do these videos. its nice to see someone who takes pride in what they are doing , it shows in your work.and it is very much welcomed here. thank you again .
Hey Chris, thank you for the kind words. I enjoy working in the shop and sharing with others. Glad you enjoyed the video.
Thanks for watching.
I learned something today with the transfer punch trick. That was an awesome build, too. I liked the fact that it was completed with paint and everything. Wishing you much success in all your endeavors. Thanks for sharing your knowledge and skill. Aloha!
Hey Waiakalulu1 glad I could share that with you. Thank you very much.
I have been scrounging to find the scraps to build two similar stands for my shop. One for the grinder and one for the bench top drill press. All, in all, really nice.
Great work, l did mine with RSJ, half inch top welded on, the sunk in 15" concrete, no vibration at all.
wow they look great. your skills with the torch and welding are wonderful. The spray can though can be improved. I suggest Klascoat two part epoxy paint with a spray gun from Harbor Freight. I shoot rc airplanes with Klascoat and its impervious to gasoline and glow fuel. Great Stuff. Keep up the good work!
When reading the comments I can't believe people and how mean they can be?
Hey Rhshel, thank you for the compliments. I'll take a look at the paint. We just got a harbor freight here. Good to know the fuel doesn't bother the paint. I love RCs stuff. I raced trucks and buggies for several years; many year ago though. Losi and Traxxas were my two vehicles. Never really got in to planes but I had some friends who were. Awesome stuff. Takes a lot of skill to fly.
yea, the comments are bad at times. The internet is full of trolls :-)
Thanks for the comments and watching!
rhshel n
rhshel a
Sorry I missed your video of making the vise stand they look really good I have to find the video because I would like to make one keep up the good work bill
Nice job! Thanks for sharing! 🤙🏻
Great job, I really like the way you put them together. Thanks for the video.
Thank you Gary!
Great job. I learned a lot from watching. Thank you for taking the time to post it.
Hey Tom, your very welcome. I hope to post more in the future. Been a lot going on at work. Thanks!
Very nice, clean & simple way to keep a vice accessible in your shop.
Thank you Virginia. I really enjoy mine, I need to make it a little more heavy and add some wheels. I plan on making another video for the upgrades.
Thanks for watching, Please subscribe if you haven't already.
For what you have to work with they came out nice !! I wood be proud too have them in my shop!!!
Thanks gizzo123us . I've got several comments on how good they look. My buying was amazed. Could pay me quick enough. Thanks for watching!!
Sacré boulot. Bravo.
Ficou muito bom, 🖒🖒
great job, from an old ASME Certified Welder
Hey Larry, thank you Sir.
Thanks for watching.
Part-Time Fabrication nice torch work
Steady hand. I need to use a standoff with my powerplasma cutter or I shake like a leaf.
Thanks Steven. Really appreciate that. Thanks for watching
Please subscribe if you haven't already.
i
Awesome work - Need one of these myself.
Hey Thanks Jose Esposito - These really are great tools. I seem to use them almost ever time in am in the shop. I am loving that I made them higher than your typical work bench too. I don't have to bend over so much and I can see things because they are higher. Plus I can quickly move them over to the door for more sun light.
Thanks for watching!!
Nice Job I have two large Wilton Vise I got from a lady after I done some electrical repairs she pulled them out of an old shed said her late husband had them their for years but never did anything with them she asked if I could use them to make an offer I ended up giving her ten bucks for each one . It's people like you that got me into watching You tube now I know how I'm going to mount them myself. Thank's you do nice work.
Hey Ernie, thank you. That is a great find, hard to find those at a decent price for an every day joe. I've found them in the past but everyone wanted about the new price for them. Glad your going to do it your self. That is music to my ears.
I am going to do a video of the vice stand where I do some upgrades. (Tool holder, wheels) Should be a good video.
Thanks for watching. Please subscribe if you haven't already.
Nice Job! I'm in the process of assembling the materials to build a stand like your "H" beam stand, but mine will be for a bench size drill press. As far as my big 6 inch Vise, I got lucky. The Mining Company that I worked for, when they shut down operations and dismantled their big Welding Shop, I got the stand that their large Vise had been mounted on.
Awesome! I've got some good stuff the same way. Usually when others have moved places of work.
Thanks for watching.
Very nice work! I would be proud to have either one in my workshop!
+cat637d Hey Cat637d, glad you like them. Mine has been awesome. I think it needs to be a little heavier but still a great tool.
Thanks for watching. Please subscribe if you haven't already.
nice job, thumbs up
It's a clever design. I really like them. Keep up the good work.
Thanks VHO TECH. Will do. Thanks for watching
Wow these are wonderful stands!!
Thanks Jo. Thanks for watching. Please subscribe if you haven't already.
Looks good and great music!!
awesome job! Those are definitely sweet!
Hey Blair. Thank you
Very great project
Thank you very much for sharing your knowledge.
Thank you for watching Abajh Alghamdi
Nice work! They really turned out good.
+Rattletrap2 Thanks Rattletrap - Those guys who got them were very happy.
Thanks for watching
Great idea. Like the guitar riffs.
Thanks Enrique Mendoza . I love the music as well but most viewers hate it. :-(
Thanks for watching, please subscribe if you haven't already.
Fantástico! Se ve bastante fuerte!. Encantada de hacerlo si tuviera maquina de soldar
Hey Part Time those look great as well as functional and I lived through the music forget the music haters that's why they have mute for the music haters,great job you are a master
Thanks Augustine Sullivan! Glad you like the video.
buen trabajo , your work is an art
Excellent!!!!
I like the effort you put in your project the finished work is first class.
Thank you Juan
Good video. Your final product reflects conscientiousness.
+Robert Johnson Thank you very much Robert 👍
Very neat and precise work 👍
Thank you Lawrence
nice work, those look pretty awesome.
Thanks Cruzillo! Please subscribe, if you haven't already, for more videos like this one.
Great job, looks fantastic
Thank you Nutintoitbut2doit
Excelent Work, it´s perfect!!!! from Argentina
Thank you Marcelo. I am unsure of the measurement. I will check the "H" beam and message you back.
Great Job....nice build...clean work, very nice work.
Thank you Scott. Much appreciated.
Muito bom, gostei da idéia.
I'm gonna build one . I've got a vice in my shop on the bench and one that mounts in a 2inch receiver hitches. this looks like it'd be great for outside random jobs
Indeed, it is very mobile. I plan on putting some wheels on mine very soon.
Buen trabajo 👍
Very nice, I need to make one to for grinding outdoors instead of getting the shop all messy.
Thanks Hubjeep. Yea grinders make a LOT of dust. Good Luck!
Nice work with the torch !
Thank you Sir
Nice 😃
very professional love the job.
Thank you Bhola
Really like these vises
Thank you Les Berdine!
Pretty elaborate 👍
I build all my benches high enough so I don’t have to bend over to work. Saves wear and tear on my old body
Thanks Rocken Roller, the stand I have works really well. I hear you on the height. I try to make them high as well.
Thanks for watching
Very nice. Looks good and I am sure it's functional.
Thank you!
It is indeed very functional.
show, era o canal que eu estava procurando!
Hola Altair Me alegra que lo hayas encontrado. Gracias.
Un trabajo expectacular felicidades saludos
Muchas gracias
Great DIY sir. Keep it up.
Thanks Joe!
Nice!!!
Great video. Good information on how to.
+Robert Meuser Thanks Robert. Glad you enjoyed it.
Please subscribe if you haven't already.
nice job !
nice work, would like to have one
Good and Neat work
Thank you Sreenivas
Buen video 👌
Saludos de el Salvador
I just bolted mine to my bench, took me 5 minutes and my truck still has rear brakes! JK! Looks good man, I could see many great uses for one of those.
Hey Mad Jeeper, absolutely one of the best tools I have in my shop. I use it every time I'm in the shop.
Thanks for watching
Perfect thanks for the tip
Best design in my opinion, got myself a drum from the junkyard to start
Hey 1991tommygun, that sounds great! Good luck
muito bom meu amigo
Good work
perfeito.
parabéns pelo seu trabalho.
Obrigado
Appreciate your videos. Getting some good ideas for future projects. I'm total noobie and need all the help I can get.
Hey +Jim Smith You are very welcome. Home you enjoy. Thanks for watching
Hey man those are really nice!
Thank you cooljess76. The vise stand is one of my favorite tools.
Thanks for watching!
Great Job
Thank you!
Super ! Les bonnes idées c'est bien , mais faut reconnaître que tu es outillé!
muito bom
COOL VIDEO . KEEP UP THE GOOD WORK
Thanks Junior Castro, Will do.
Good job,just subscribed!!
+KANO R. Thank you and Thank you!
Good job sir
Hay man I used my air chisel on that heave rust on the drums .. Loud as hell but knocks the heavy rust off fast !!! Thanks for the vid !!
Thanks Herbert! If I do another video I will pass along this information.
Wear ear protection. Air chisels can knock your head around pretty good with the loud noise. PT Fabrication, you should get a powerplasma cutter.
Willy Jacobson I agree with both. Absolutely! Thanks
Great Job!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Im making one using an old brake disc from a Chevy C-60 truck. However im gonna add a plate to the top that will accept my tubing bender and a mighty brake to bend sheet metal with locking them down with some old very strong action clamps I have, so I can interchange those two faster and easier. I drilled 4 holes through the rotor surface and have drilled holes in my thick concrete floor of my shop and added some hefty deep anchors in the same drill pattern. I added 2 wheels I picked up at Tractor Supply and added a handle to the post. The wheels sit about 2" off the surface of the floor and all I will have to do is tilt it back for the wheels to contact the floor and I can roll it out of my fabrication area when not in use. I will secure it in its spot when using it with 4, 1" grade 8 bolts. I bought 4, 1" 1/2 drive impact sockets on the very cheap at Harbor Freight tools and welded them to the bolt heads and, will use my impact gun to fasten it to the floor. This video you made was the inspiration for my project. Thanks your awesome!
Hey Andrew Thank you very much. That sounds like an awesome build!! Send photos. You can get my email address from the About tab on my CZcams channel.
Glad I inspired you.
Thanks for watching.
awesome job...man..
Thanks Sal. The vise stand I kept has been a great tool.
Thanks! please subscribe if you haven't already.
Great videos!!
Thank you Scotty!!
Thanks for watching and comment.
cool vise build
Thanks Dragon
🤔📷👌nice art pieces thanks 😀🕵👍
Nice builds. I made pocket type, square tubes in floor to hold them. Next time you use a socket for centering, maybe drop a couple nuts in socket, might get it close without fiddling. I have a lathe, wouldnt be without it now.
Thanks Frank. That is a great idea about the nuts. I wish I had a lathe, that is on the wish list. Everything I find is too big. Found a nice lathe for only $1000 buck and it was 30 minutes away. Only problem is it was 10 feet long. Next time I guess.
Thanks!
Great job SirGreat video
Thanks Daz Man
Muito criativo, gostei parabéns
Thank you very much. Muito obrigado
Nice job.
Hey Earl Cousins Really appreciate that. I really liked the way the red one came out. Thanks for watching and subscribing!!!
Yes Sir very good video's , like your work.👍👍👍
Thanks Barry. I am not the greatest but I do my best. Glad you like the videos.
Thanks for watching!
Nice build. Is there an advantage to bolting to the brake drums as opposed to just welding on to them? I would think that drilling 10 large holes is a PITA. How many occasions would there be where you would actually unbolt the brake drums from the risers?
nota 10 show de bola
Very cool
Thanks Scott
Are your vise stand for sales and how much I love your work good job bill
hell wooow lovely build and you only use useda drumbrakes thats awsome
me as an trucker loaning this idea from you thx for an funny video hans in sweden
Thank you! Yes, please. Use my idea all you want. Thanks for watching
very much enjoyed
Hey Terry, very glad you did. Please subscribe if you haven't already.
Thanks
I think is great . i have some used drums that i can use. Thanks
You are very welcome. Definitely one of the best tools I have.
very very good work and great idea ciao
Thank you Michelangelo! I am glad you like the video.
What size bolts did you use on the lower base? What size holes did you drill for the lower base? I really like your design.
fantastic
Thanks thechucky66
Great job! Love the video! What tap and die set are you using? I’ve been looking for a good set...
Hey BTK, thank you. The Tap & Die set is a great quality. I've used it a bunch. Its a course thread set. Here is the link.
amzn.to/2UyDCPI
Not to expensive either and it said "Made In the USA". So that is why I purchased.
Thanks for watch!
buenazos los videos
Gracias Carlos
Excellent fabrication video. perfect project for a DIY'r.
Hey Fred, indeed, this is a great project and you have a extremely handy tool when your finished.
Thanks
Very good.
Thank you Carlos
Good Job. Ive been wanting to build one of those for my brother. About the music...I dont mean any harm but just like a good steak doesnt need any sauce your good video doesnt need the music for me to like it! Thanks.
Thanks JD. Yea, I think the music is gone from future videos. Everyone seems to dislike it. Thanks for watching and the comment.
Thanks again, please subscribe if you haven't already.