DIY Bench Vise Stand with Storage
Vložit
- čas přidán 13. 12. 2018
- In this video I make a simple vise stand for my Wilton. All of the plate I use is .250” and the tube is 4x4x.250”. Thank you to those who gave some great feedback through my Instagram stories on how to mitigate the wobbly base.
Subscribe to my channel: tinyurl.com/y7zwahpu
/ @tylerbellmakes
FOLLOW ME:
I make daily stories on Instagram
/ tylerbellmakes
/ tylerbellmakes
TOOLS & SUPPLIES (affiliate links):
Leveling Feet amzn.to/2rBEgi7
Welpers amzn.to/2EubYyz
Unibit amzn.to/2QQZwyx
3-IN-ONE Oil amzn.to/2rAGYo0
40 Grit Flap Discs amzn.to/2EuaO6g
12” Speed Square amzn.to/2EukSw0
New Favorite Glue amzn.to/2Msi1E2
MUSIC:
player.epidemicsound.com - Jak na to + styl
This is awesome! Such great storytelling. 6 minutes went REALLY fast.
Excellent work. Your demonstrations are concise, clear and wide open for anyone watching them to add their own subjective improvements.
That Wilton vise is DANK. Edit: good inspiration here, I'll likely borrow some design elements from your build and create a multi-purpose stand that can be used to mount bench vises, bench grinders, and other tools.
Very talented young man, I wish you could build one for me.
I'm looking for a vise stand for my dad's 30-year old (now restored) bench vise. I grew up watching that thing take a ton of punishment while crafting a plethora of projects and even learned a lot myself from it. This video is a TON of inspiration for my next fabrication project. Thanks a ton for the creativity push.
The wilton bullet is like my dream vice man you're so lucky you have one.
Sweet! I definitely agree with some other comments. The story line is what held my attention. A simple search for a solution. Nice work!
Hi, I enjoyed the video. I’d like to recommend welding in your main square tube to the bottom plate with 1 inch welds on opposite sides allowing to cool in between each set of 2-4 sections of weld until it’s fully welded in, instead of welding a solid line on each end in one go. You’ll find it doesn’t warp the bottom plate as much if at all.
this video is so awesome. that intro sequence was golden hahaha
this was a big help in my vise stand design. Thanks for all your ideas! I envy your man cave!!!
That's what it's all about. You got my vote. Well done, bravo.
Great vid Tyler. Loved watching you problem solve as you go.
Genuinely thought when you said accessorise it was gonna be like spinners and neon haha!
I really enjoyed your video on the vise stand. Great job!
Great project and fantastic video. Excellent editing and story telling. Well done!
Nicely done video - not to mention the stand that is awesome!
Thanks Tyler good looking vise stand keep up the good work bill
Great work and an even better video. Loved the story telling. Looking forward to seeing more!
Awesome work ,great idea for a vise will probably copy and thanks for your video !!!!!
Well done Tinkerbell.
Bad ass build. Loved that
Nicely done Tyler! 👍🏻👊🏻
Great work Tyler!! Very cool.
Looks good, well done!
Nice work Tyler. And great editing !!
Fun to watch. You are quite the entertainer. A skillful one at that.
Dude, this is such a great build, I love it! And I want one! 😄
Very funny too! 😁👍
Crushing it man! keep it up!
Showing support for your channel!!👍👍
good job, simply & useful!
Great build man!
Super work. Great initiative 👍
Now I want one!
Great job Tyler!!😃 I love the 2.0 also! Keep up the great work man👊🏻 💚
Great job young man
Nice job bro 👍👍👍⚒
Good work! Greetings from Poland.
Thank you!!👋🏻
Just a upgrade suggestion. weld 2 non rotating wheels on the front side so that they touch when you tilt the base so it is easy to move.
You can also make the baseplate round and roll it like a 55 gallon drum.
Nice job👊
Pretty hard to beat a welding table when doing something like that base plate. Tack it to the table, weld on the leg braces etc, let it cool, break the tacks free and perfectly flat base.
Great idea
Nice I like when you said stay
Hey ho TB. Nice job.very stable. Easier working now with the vice. Like 1 keep the great work comming. Greetings from Germany 🇩🇪
Great video nice shop.
Excellent.
Nice Job Tyler. You did a nice job of over building just like I do... Fabulous Vice Stand..I am making one like yours
Thanks!
Great work, I ended up here after watching Jimmy Diresta’s Instagram story. You definitely earned a subscriber!
Great job.
Very nice rig.
Pretty slick, Lookin Good. Later from Texas.
Wilton vise!! Good ones if it’s an older one!!! Looks new!!
nice job👍
cool staff
I like the idea of having concrete at the base of the stand.
good job! Like!
Fantastic
Nice!
🙋 Hi Nice Job , got some good ideas from this. THANKS ❤
GOD BLESS
The good thing about that type of stand is you don’t need the x/y pivot on the vice so can cheep out if you don’t need the z pivot (vertical pivot for the jaws) because the stand is moveable
I made one for inside and one for outside because I’ve got a very very old vice I inherited (just oil once or twice a year to avoid rusting)
🇷🇺 пересмотрел много подобных работ, у вас более устойчиво и надежно сделано, спасибо !!!
Nice
Muy bueno!!
What was the double bar part that you added the holder at the base for?
من القلب. برافووو
Add wheels on one edge so you can tilt it over if needed.
What did the parts costs you to make the vise stand I have the same h f stand you have not that good need to make a better one good job on the vise stand
Hi Tyler, can you tell me what type of welding machine you were using for this project? Thanks
Отлично снял
You think the harbor freight grinder stand would work well for a much smaller vise?
You could add a couple of castors on the side, so you could tip it over and wheel it about,
Good idea. I was going to but it slides pretty easy
Very good👌🏻
Any advice on how not to warp the bottom plate? (obviously dont heat it much) Stitch weld approach maybe? I am about to build one of these
I found that it will warp a little no matter what. Either heat the opposite side of the welds later with a torch to un-warp it or add stiffeners like tubes
@@TylerBellMakes Thanks, one last thing. What was the dimensions of the bottom plate on the floor?
Tyler - don't know so have to ask; what's the cube with the handle main purpose? Looks like you're using it for several things - please describe/explain. I'm in the midst of using this vise stand demo to construct mine. Thanks
You look like young Sheldon
Tyler, which model number is that Wilton bullet vise, and what made you choose that particular one over other vises? BTW, you do nice work.
400s. The large aerospace company I work for has hundreds of them so I figured it'd be good enough for me. Thanks!
Tyler Bell Okay, thank you. I appreciate your prompt reply!
What is the height od this stand? I have big York Vise and building stand rights nie,, but I dont know that is should be as height ass workbench or lower?
Hi. I have the same Vise, but the numbers on the jaw and the stationary Jaw are faded, and the casing nut is broken. Would you help me with the numbers on your Vise to order a replacement for my Vise ? Thank you.
How thick was the plate you use for the base and top thanks
1/4"
I still can't decide if I want to buy a new 400s or a 600s. Have you ever wished you could get a 6 inch over the 4 inch? I think new prices are currently around $709 for the 4 inch and $1499 for the 6 inch.
Bigger is better but the 4 in has been good for me
Next one before you weld the top pour some dry sandblast sand for more weight in the frame of the stand...........
Nuts underneath will ding up the floors lol
Gusset under the vise but nice stand overall
Didn't you just need to add that base to your existing one?
You need a forge friend
The plate didn't warp, it bent after you slammed it on the floor to look cool. 1:35
Take my money... sick.
Нормас 👍🔥😁 Ссылку на музыку покажешь? А, Я уже подписался😁
Hey I know that guy
looks like u over did it for a vise stand.
If it's worth doing it's worth overdoing
Perdone,pero no agrego peso a la base,ese.caño estructural se carga con cemento y tambien tierra o arena en su defecto
It's good to see a "Smart " kid ...for once.
Is this a build video or a music video? Make up your mind.
All you had to do is bolt it to the floor. Cool video tho
Said it wasn’t his floor
Por dios, me voy a la mierda. Creí que está viendo un video de "LLAME YA" you tube va en caída libre. Cualquiera sube cualquier cosa!"
Would be a better video without the background music. Very distracting
the music sucks and it makes the vid bad, dislike