Video není dostupné.
Omlouváme se.
Sprinkler Zone Won't Turn Off
Vložit
- čas přidán 6. 08. 2024
- (reuploaded fixed video)
If you have a sprinkler zone that won't turn off, there's a few easy methods you can try to resolve the issue.
See if Sprinkler Master Repair offers services in your area:
bit.ly/3JYoWll
Chapters:
0:00 Intro
0:19 Preparation
0:37 Troubleshooting the Valve
0:53 Finding the Problematic Valve
1:14 Check the Bleeder Screw
1:41 Check the Solenoid
1:56 Adjust the Flow Control
2:27 Turn off the Main Shut-Off
3:02 Check the Body of the Valve
3:28 Disassembling the Automatic Valve
4:01 Rinse off the Diaphragm
4:20 Reassemble the Automatic Valve
Sprinkler Repair Playlist:
• Tutorials
Sprinkler zones can sometimes not turn off, even when the timer is turned off all the way. The problem can be with the sprinkler timer, the sprinkler solenoid, or the automatic valve internals. It's pretty easy to diagnose this, especially if you have the proper tools.
Thank you! This solved the mystery in my backyard - saved hundred$!!!
Betcha this would work...if I could find the valves for the zone in question.🤨 Buried under mulch? 🤔
Great video! Easy steps and solved my problem ❤
This was super helpful; thank you!
Good stuff, found to be very useful 👍🏼
Super helpful!! Thanks very much😊
Very helpful … nicely explained
Thank you. Super helpful.
Thanks for the help!
I am back up an running thanks!!!
Called in a sprinkler guy and he found one of the valves was plugged up and was affecting the other zones - still not sure why - but that fixed it. Go to the zone that initiates the problem and take the top off the valve and see if it is plugged up.
Thank you!
Wow
Ty
brand new valve of different type, won't turn off. Went back to orbit exact model, still won't turn off . Didn't get dirt it the lines, two different valves same issue. Any ideas.
I have strange problem , when I start my sprinkles system early in the morning or beafore become night it work fine , but when sun rising some valves stop to work and don’t stop water and on some zone few zone work together . Wherr is problem in rainbird controller or in valves ?
My problem is one of my zones will activate when any other zone is activated ?
Same here. Have you fixed it yet
Yes - the valve itself had debris in it holding the valve open - so any zone that was told to come on would also put water thru that stuck open valve. Took the top off and cleaned out the valve and put it back together.@@jdirt9837
I’m no expert but the valve turning on may be stuck open.
How did you fix that? Am going through the same problem. Don’t wanna call in a contractor
Mine act weird. One zone did not shut. I opened the air valve, it is different that the video. It shuts off by doing so, but I hear water flow noise.
Next, I tried this with another zone, but when I tried to shut the air valve for the other zone, this time new zone turns on an never shuts. Had to turn off full irrigation system. Any idea?
Same exact issue I’m having
Can you still run the sprinkler system with this issue until you are able to get it t fixed ?
I would isolate that zone to avoid flooding. I came home to all of my mulch on the Walkway and driveway.
@@swaggtastic51how would you isolate? Do I just turn off the flow control valve for that zone until I have time to replace the whole assembly?
Zone won’t come on new timer new cylinoid