Part 5.2: What's wrong with my car?!? Advanced Diagnostic Tips from the CAR WIZARD: Tips 6-10
Vložit
- čas přidán 4. 06. 2024
- This is the second of two videos that shares 5 advanced diagnostic tips for when your car isn't running right from the CAR WIZARD 🧙♂️
🔮🔧 AMAZON AFFILIATE STORE: www.amazon.com/shop/omegaauto... 🔧🔮
🇬🇧🇬🇧 UK AMAZON STORE: www.amazon.co.uk/shop/omegaau... 🇬🇧🇬🇧
🧰 BENDPAK LIFTS: www.bendpak.com 🧰
👕 CAR WIZARD MERCH: teespring.com/stores/carwizard 👕
📷 INSTAGRAM @therealcarwizard 📷 - Auta a dopravní prostředky
it's amazing how youtube went full on bananas with scotty kilmer and now we have the bob ross of cars with the wizard
I used to watch kilmer a long time ago for a short while, he came across as a fake to me.
@@dave_n8pu I agree with u man seemed fake and seemed to always be yelling about something
@@1homeboy815 , I thought SK was more YT "personality", than real mechanic anyway.
@@thomasfoster2 I watch his videos at like 4x speed just to see if there is anything interesting in there.
I stopped watching him after the numerous videos singing the praises of Toyota (which I mostly agree with) and every other car manufacturer was garbage.
Im pretty sure the 9 dislike are mechanics in wizard's area that are hating on him for being such a Wizard. I mean, who wouldn't take their car to him???
Dead pan face “Yes. You did” 😂
Ha! Yes I just LOL on that one.....he didn't include the addendum "you f.... idiot" 🤣😁 but its kind of implied
THAT is a clever user name! I wish I'd thought of it.
That was my favorite line he said. I laughed when he said that with dead eyes, lol.
I love this series please keep going. Maybe split into “what’s wrong with my car suspension series , engine series. Etc
We're going to call you doctor wizard.
Before checking bearings I like to wet down the belts to rule out a belt noise.
Interesting, I always just look at the belts, see if they're cracked or wearing on something. Usually a good belt will never make a noise. But wetting them down is good advice, thanks.
Do you use water or WD40?
@@GlamStacheessnostalgialounge The multi-groove belt on my 7.3 diesel will occasionally make irritating sounds that could otherwise be an idler. Wetting it down saves a lot of investigating time.
@@oldretireddude what ended up causing the noise?
@@Tempsho it's usually the belt. I've had my late '99 F250 since 2006. I have replaced the idlers once and the AC clutch assy once, but every other time it's the belts. I used to use belt dressing but it didn't last long and when freshly applied the belts make a, tearing apart velcro, sound that gets in the way of hearing other noises. In recent years I saw a tip on CZcams about using ArmorAll or 303 type product to dress belts and it's worked extremely well. I only hear from them 2 maybe 3 times a year now. I've only replaced the belt twice in all those years, once at 100Kmi and once when the idlers were replaced, and it is still in great shape, 165K miles.
A good old wooden broomstick and a good ear for us po boys
I used to have a V8 Rover with twin carbs and could not get the carbs balanced properly. Took it to those electronic tuning placed who plugged in all sorts of cables and they done a reasonable job but still not perfect. A friend put me in touch with an old man who came to my house with some very basic tools. He started the engine, got out an old long wooden handled screwdriver, put one end on his ear, the other on different placed around the block at the same time turning tiny screws on the carbs. The sound changed and the engine settled down to an idle with no movement at all. He got it running perfect. Clever guy!
A tip for you--you mentioned the stethoscope hurting your ears. I always put mine on just in front or behind my ear rather than IN my ear. You'll still hear everything, it just won't be right against your eardrum.
I really appreciate your wizard tip videos! I’m a Volkswagen dealer Tech and have picked up several tips that I now use regularly at work from your wizard tip videos.
These are the best videos on CZcams when it comes to guys like me who work on stuff and muddle through because nobody taught me this...
Wizard. Your video tells me why I would go to someone like you instead of trying to fix stuff myself.
Before pulling fuses, make a picture with ur phone.
Love the Grogu shirt. Gonna have to get one for my grandson and me.
Finally, this series from the last video has ended. I am hoping for an all-new, buy this, not that video for minivans and full-size vans on Saturday or next Tuesday. If the Bug Ninja visits the Car Wizard on Saturday, all of us are definitely hoping for a buy this, not that video for Subaru vehicles, following the 2.5 L flat-4 engine description from Ratchets and Wretches, regarding the head gaskets. Thank you.
Two more battery tips: If your battery is going dead on a car you don't drive often, but you don't find a draw like a trunk light stuck on or a mechanical clock running, make sure the TOP of the battery is clean. Dirt collects there and can become conductive in damp weather. Also, if you can't find a draw, make sure you know where ALL the fuse boxes are. May be one hiding in the trunk, under the dash, under the hood or who knows where. Another tip for overheating: Make sure the fan is actually working. My mother-in-law had a Ford Tempo that was running hot. Dealer couldn't figure it out. I found the plastic hub on the electric fan had broken. The fan was still on the shaft, but no longer tight. The fan motor WAS spinning the blades but not effectively pulling air. Trip to the junkyard for a new fan fixed it.
I don’t have an automotive stethoscope, I use a long screw driver and put my ear on the handle. Harder to do in close spaces but it’s been fine for the cars I’ve owned.
Great demo on the battery drain.
Thank you Wizard.
Don't hurt yourself!!! Great advice from the Wizard!! 😀
I hope other mechanics watch this and learn. I've ran in quite a few that have no idea how to troubleshoot. Great tip on the battery drain test!
we love these kinds of videos, thank you mr Wizz!
Thanks for those 10 tips.
They will save me from a lot of headaches.
Thanks for sharing your wealth of experience, Wizard.
These videos are my favorite series
I’ve learned a lot from you Wizard. Thank you
The Fuse Buddy is a fantastic tool. I love ours.
Fantastic stuff Wizard. Love the videos. Keep them coming please. Thanks
Wow, this is such a good explanation of how the system works. Gotta watch it again and study!
Great tips wiz..Thank you for a channel worth watching and being real, best of the bunch even hoovie !!
Worth waiting for the last tip Wizard. Problem Solving Skills, I like being that guy
Great vids appreciate the info. I bring my car to a shop and this helps me to understand what’s happening
This is great teaching instructional videos and a good direction for your channel.
Thankyou so much for making this vid! Your demo of a parasitic draw test finally helped me understand that procedure.
Thanks Wizard !
Great steps thank you for sharing !!
Love this. Especially that last tip. If you continue the series, maybe consider doing some tips for older cars/classics such as ones with carbs and drum brakes.
Wizard These Videos are absolutely Brilliant! great for the beginner and the experienced ! you clearly have a Well of knowledge ! keep it up man
With the gm side post battery use a bolt and nut for connecting will never come loose
Well done my friend I love watching your show I've learnt so much from you about my car's problems
Always great vids!Thank You for sharing your knowledge!Cheers from Russia!
#6 tip is great, I have one of those but forget to use it. Amp Hound would make a great Christmas present.
Oh great car wizard i have learned so much from you
Keep it up and thank you!👍🏻😊👍🏻
I really like your channel!!! Wizard, please take a page put of Kilmer's book and NEVER RETIRE!
So many useful tips here. As a regular perwon trying to work on his bikes and cars, I struggle so much even with some basic things. This is an awesome learning opportunity. Thank you so much! 🙏
I wish you were in Central PA. Great video. Knowledge = Power = Experience
I'm chasing not only electrical issues but heater core issues on my Scout II. Thank you so much.
Thanks man some of these I didn’t know. 👍🏼
Your a great man Wizard!
Car Wizard you are one mellow dude, were you always like that?!? You sure are good at explaining stuff!
Great stuff. Knew about 1/3. But enjoyed the other stuff I didn't. Want those switches and wrenches
I ordered an amp hound awhile ago. Can't wait to get it!!
For Tip 10 I like using a DC clamp meter since it's a lot safer/easier and can usually measure more amps.
This was really good. You know your audience. Competent garage mechanics.
Even I understood that, and I am not mechanically minded. Thank you to the Wizard Family.
Thank you for the tips
About tip number 9: you're absolutely right, but I have had 2 instances where it turned out to be something else. In both cases, the bottom hose was cold, but not because of the thermostat or the radiator. First one was a broken plastic impeller on a 2.0 volx...no coolant flow because the pump was turning but not pumping. No leaks or anything, just a broken impeller. Changed it out for a metal impeller pump and problem solved. Second instance was on an echotec GM engine in a Cobalt, same scenario. Turns out the balancer shaft chain (which also drives the water pump on those engines) was broken. Engine ran fine, but overheated because the pump wasn't turning. (The customer scrapped the car because of how expensive the repair was, what with removing the entire timing chain assembly to get to the balancer shaft chain...) Admitedly, those cases are rare, but they DO happen once in a while.
EXCELLENT VIDEOS ALL THE TIME
You can also use your multimeter to test the fuses as well. Just make sure to hook the battery back up. I don't like pulling fuses because sometimes that can actually wake a component up and cause false readings.
Another GREAT video! A good alternative to a stethoscope is to use a long screwdriver or pry bar and put your ear up to the handle. It helps if you are able to plug other ear with use of ear plug or head set but not always necessary.
Got one for Tip #9: your water pump could have a damaged impeller so it’s not moving the water anymore at a rate high enough to effectively cool the engine. You get a heated radiator and hoses but still your engine overheats. Happens often to older cars with plastic water pump impellers.
I second this one. Had a '79 Chrysler slant 6 that had a sheet steel plate between the impeller and the outer pump housing. A hole rusted out in that plate so that at some RPM ranges, the coolant would do a loop inside the pump, rather than flow through the hose. Weird to experience, but you could keep the temperature at the right spot at one speed. Go about 5 MPH faster or slower and the temp would start to climb.
These are really nice tips for me to tell my family to rember about the battery In the car 👍🙂
This presentation was OUTSTANDING. Tip #10 was particularly good as very few people know how to check for a drain. I learned from a battery wizard in Chanute who has since passed. He taught me to make a test unit with a pigtail with a 6 volt single pole bulb. I would hook it up just as you did to find a drain. I was having an intermittent drain problem on an 85 Buick Skylark which would drain one day and not again for a few days. Really weird. I decided that something was changing from each running event. I ended up removing the alternator belt and then rotating the alternator shaft and sure enough, there was an internal short at one position causing the drain. I replaced the alternator and VOILE... problem solved. You probably have had this happen too. Watch you and enjoy you both every day. I left Chanute 30 years ago and now am in Allen, TX, a suburb of Dallas. Next time I'm up in Coffeyville visiting friends, I may being my E350 up for an oil change.
Some good tips to save money!
Pop? Lol! I forgot y’all are in Kansas. Down here in the Great State of Texas we say soda water or soda.
I used a really long screw driver as a stethoscope. It doesn’t work as well but it helped me diagnose my mom’s Volvo with that had a weird noise in the engine bay. I told her it was her alternator. I was 11 years old so of course my mom didn’t believe me but when she came home from the store that night the alternator was on fire
I used a pry bar instead of a stethoscope for years. The stethoscope is so much better. Thanks for the videos, I've been an ase master for 30 years. I have a ton of time savers I'd be glad to share. Take care
I like the way wizard wife ask questions for us keep moving boby
Love these how to vids
Btw, as it is not very common to have a ampere meter, an alternative is to use a low wattage bulb in series to the battery terminal. When car is healthy the very low current would not light up the bulb or it will be very dim. The higher the leakage current the brighter the bulb. Obviously meter is best but this helps as a quick test and might be just enough to find the culprit.
Good information.
Good info. Im 54 and you just taught me some stuff.
Another overheating item to check. I once borrowed a car that was rarely driven more than 5 miles at a time. Before using it to go on a 50 mile trip I checked the fluids and the antifreeze reservoir was full. Not too far on the highway started overheating. This was an older car that had radiator cap and another cap for the bottle. Opened the radiator, and it was empty. The tube between the two had a hole, so it was spitting out thru the hole when hot, then couldn't suck fluid back in because of the hole when it went cold again. Filled radiator and when got it home put in a hew transfer tube.
I’ve been watching Wiz for so long I can play the theme song on my drums, no problem. Need to expand on it Wiz and make it really rock. Give it at least 15 secs to let it rip. Content is one thing but opening theme is first! Cool hook. Thanks for vid Wiz! U da man bub!
Great tips .. Thank you ..
I have used a plastic stiff tube or wood dowel as a stethoscope
Excellent. I came across your channel looking for "what always breaks" videos on chevy 2000-2007 tahoe\suburban etc... I have my daily driver 2000 tahoe with 475k and of course am interested in what I don't know that's sure to happen! I have replaced the trans at 425k, transfer case also and various consumables, obvious things that wear out. Just put new 70k tires on as I expect to wear those out! Now doing catalytic converters and had the frame stiffened because of rot. I will fix the engine, drive train, ANYTHING to keep the old girl in service as I refuse to pay for the junk coming out now. I watched your video when you said you knew people that could write a check for a new truck but will not do it, now you know another guy :) Thank you for keeping the shadetree and less mechanics in mind as we all did not get the car gene and need some guidance to start. Much appreciated, keep up the great work!
Another quick way to chase down parasitic draws is with a multimeter that has millivolt resolution. In this day and age, even harbor freight has them for under $10. Just set it to mV and measure the voltage drop across fuse test point. 0.0mV means no current, while 9.9 means the fuse is about to blow from too much current :).
Where is that guy from the first video comment section asking if there was gonna be a part 2? IT'S RIGHT HERE!
Helpful. Thanks
Thank you very much again great videos great tips I do have a question. If a customer Tow the car to your shop but all The problem is loose connection on the battery will you charge the customer anyway how much will you charge it just to tied up to lose battery connection?
My Dad used to use a very long handle flat screw driver to figure out which pulley was bad, Liked
Car Wizard, I experienced a battery drain due to dash cam plugged into cigarette lighter or the 12V power outlet. I have two dash cams, one in my '09 Corolla and one in my 2000 Ford F-150. The one in the F-150 light on the plug stays on all of the time. Yes, it has drained my battery. My F-150 actually has two 12V plugs beside each other. One for cigarette lighter and one for power. Tried both plugs and are hot all of the time. The outlet in my Corolla goes off when engine is shut-off. You gave me some advice I can use. I also have a '91 Ford Ranger 4.0L and I loose coolant due to back pressure causing the lower radiator hose to swell. I'm thinking a clogged radiator. I will check to see if bottom radiator hose is hot at operating temperature. Thank You, Wizard!!! Your the Best!!! I am amazed how much Mrs. Wizard knows about car diagnosis; I think she knows more than most men and perhaps when the Wizard is stumped, he turns to her for advice.
You can rent the AMP hound from Oreillys
Stop pouring cola on your battery terminals! It makes a mess, no one ever cleans it up, and you're wasting a perfectly good drink. Baking soda and water made into a paste will neutralize the acid, then clean with a wire brush. Drink the cola as a reward for a job well done. Thanks for coming to my TED Talk.
This dude is a genius
My neighbor had a Ford E-150 with a parasitic draw, it was intermittent and nearly a nightmare to figure out. Thankfully the right set of conditions were there to present the issue while I had it. Bad cluster that wouldn't go to sleep, had it rebuilt and his battery never died again.
I'd love to see you figure out my Kirby 😂 everyone that attempts it walks away stumped but I think I finally figured out what jeep liberty and the mechanic at my shop couldn't 😁
Nice video man.
Good Evening CAR WIZARD take care and have a great day CAR WIZARD
Great helpful video tips thank you
From Nick Ayivor from London England UK 🇬🇧
That peracetic drain test is a gem
Hey Wizard, can you do an analysis of the Ford twin spinner??
Heater cores are dash out in many modern vehicles, now that’s an ouch repair bill.
good info!....thanks 4 video. be kind.
A thermostat can also be stuck open a very likely cause for a cold running engine and no or little heat
One day my crown victoria stopped running and I was able to turn on the electricity but couldn't start the engine again. The battery terminal was getting loose. Picked up a nail on the curb, inserted between the cables and I was able to back on the road again.
Another day, it was a really cold morning, I couldn't start my engine. I poured hot water around my starter and I was able to go to work no problem.
It's a super easy fix but both times, it took me about 30 mins to figure it out cuz it was my first time.
Wizard is the Bomb
I had the battery connection thing happen to me, but I at least found it when I tried to jump my car...
Wizard u might have the best consistent like to dislike ratio I've seen. Rightfully so
How many amp does your anti-thief system draw? I once got airbag lamp illuminate and not go out and had to figure that one out, I actually researched it on CZcams, and it was narrowed down to a switch to check under the driver or passenger seat. It dawned on me that I recently took something from under the driver seat. So the procedure was to unplug the switch connection and reconnect it. That resolved the problem of the Airbag light, it went finally went out. I don't remember exactly the whole sequence of events I went thru, but maybe you could include it in one of your tip videos.
About your question in the end: I didn't like the tip of the stethoscope very much, it isn't pointy enough, but the tips of the amp-hound for putting on the fuse looked much better. Still, maybe there was a tip that you left for Mrs. Wizard for not only filming, but also holding equipment and reading out numbers for you, then of course this was my favorite tip.