Prove Me Wrong!! BEST Method for applying Gold or Silver Spun Leaf from LiME LiNE
Vložit
- čas přidán 23. 08. 2022
- Hey everyone, in this custom paint tutorial I will show you how I apply LiME LiNE Leafing. Understand that not all leaf spins the same. Some brands will actually dull out the silver or gold leaf when spinning (engine turn). I have tested dozens of different leaf manufacturers to make sure that LiME LiNE has the best and most brilliant spin. When applying the LiME LiNE sizing glue be sured to apply light and even on a clean smooth surface preferably sanded clearcoat. Overcoating with glue will cause unnecessary film build and will create a texture that will affect the final look. Remember spray light and keep the surface smooth. *NOTE YOU CAN GLUE AND LEAF TWO LAYERS OF LEAF BEFORE UNMASKING IF YOU ARE HAVE HAD PROBLEMS WITH TEAR THROUGH WHEN SPINNING. THIS WILL ALLOW THE BOTTOM LAYER OF LEAF TO HIDE THE TOP LAYER TARE THROUGHS IF THEY HAPPEN. Be sure to press down all of your gold or silver leaf edges if you do not plan to pinstripe the edges. Do not tape directly to silver or gold leaf! Use the LiME LiNE leafing roller to ensure good contact between the sizing glue and the leafing. Burnishing the leaf will help push in those edges and gives the silver or gold leaf a uniform look for a brilliant looking spin. Unmask before spinning so you can repair any edges. This also will prevent your turning pad from wearing out prematurely. When engine turning (spun leaf) keep a 30-40% overlap. Burnish the leaf with the LiME LiNE brush tool one more time and your ready for clearcoat. I hope this helps you all. Check out my other videos to learn more about the art of automotive custom paint.-Adam. SUPPLIES HERE👉www.amazon.com/shop/timewarpc...
- Auta a dopravní prostředky
Custom Paint Supplies Here
Amazon👉 www.amazon.com/shop/timewarpcustompaint?ref=inf_pub_timewarpcustompaint
LiME LiNE Website 👉 www.limelinepaintsupply.com
LiME LiNE on Ebay 👉 www.ebay.com/str/limelinepaintsupply?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=_jrnynoas5g&sssrc=3418065&ssuid=_jrnynoas5g&widget_ver=artemis&media=COPY
We need more people like this on CZcams
Thanks for watching 🙏
Adam's videos are sooo educational and innovative! He's the man!
Thanks for watching brother
Just got a bottle of this lime line of Amazon, and your card was in there! I'm very excited to use this in the 1/24th scale drift rc world thanks
Ha! I made one of these using a round wooden knob with a 1”flat spot on it and a Dremmel tool felt pad. I made it in the 80’s while doing all the gold on 40 plus San Francisco style (motorized) Cable Cars. I still have it and after coffee, my size should be ready to gild some hand carved letters. BEST WAY TO BURNISH/ENGINE TURN FOSHO!!!
Awesome
O-Town!!! I do airbrush and custom paint and I gotta say this guy is the best in Utah. Thnx for your knowledge
Appreciate that!!✌️
thank you for posting this video im doing a full bagger and couldnt wrap my head around getiing it perfect your video helped
Love this technique! Kickin tank!
Im sooooo ready to try my hand at leafing with my Lime Line leafing kit
One of my favorite tanks yet Buddy !!!👍😎
Thanks brother
I'm going to start on my 5 gallon conversion tank for my 2018 Street Bob this weekend. Can't wait to try out the Lime Line leaf, spinner, size, flake and tape I purchased. My goal is to do something similar to the tank you just did in color scheme, but do a couple light coats of black candy on top and adding just a bit of holographic flake to the metal flake.
Awesome 👏
Great finish!
Thank you
Supplies Here 👉www.amazon.com/shop/timewarpcustompaint?ref=inf_pub_timewarpcustompaint
Hi I Just Found Your Glue Available, I Have Heard It Can Be Thick To use, does it come that way before you add the water to the glue? Just Let me know Thank You Time Warp
Amazing work!
Thanks for watching 🙌
JUST GORGEOUS
That’s for watching! 😉
That's sick!!!
It’s good leaf. I have the Lime Line Gold and Silver and they are both worth it. I bought random Etsy/Amazon stuff and it doesn’t spin. I have real gold and silver too but it is more fragile. I don’t really use the spray glue because I haven’t had enough practice with it. I use Dux size and wait the 45 minutes lol. Even with Dux the Lime Line leaf still spins well. I am still new to spinning leaf but I am happy with the leafing products I got from Lime Line.
Thanks 🙏
Love it. nice technique...... Looks great....
Thanks so much!
I havent done gold leaf yet but if you have a circle template that has the 1/4 marks you could make lines on your lime spinner tool that are at the 1/2 marks so the center dot of your spin is in the exact center every time instead of being closer to the sides.. thanks for the help though i enjoyed learning
Wow! you just blew my mind with that ✌️👍👍
Beautiful work
Thank you so much 😀
Needed this spinner badly
I love this channel and have learned a ton from you. Thanks for sharing your experience and knowledge with us. I ordered the limeline sizing glue (and the roller & brush too) after watching your videos. I am really struggling with it. I think that they forgot to put the magic in the bottle that I got. 😁 I tried to follow your directions and that on the label. 2-3 coats with around 5 minutes flash time between coats and it always seems to be too dry before I can get the leaf dropped into place, which leaves it terrible looking. I am doing something wrong, but I don't know what. I was having a little better luck with the oil based sizing, but I wanted to give this a shot just to try it. Any insight as far as what I could be doing wrong? Thanks again for your time.
🙌🙌🙌
Hey Adam, I will prove you wrong !
Just as soon as you are wrong. 😂
Good job bro !
Amazing
Cool ❤
Great job as usual thanks!! Do you guys think that would be possible to leafing true gold over engine and air filter or It would be to hot?
Personally, I think it would get too hot
Love these videos. What grit is that sand paper for the spinner?
5000 grit
Hi mate, how good is the adhesion with clear over the leaf ? do you think spinning it creates more adhesion ? tank looks wild by the way
I would guess yes it does. I have never really had a problem with clear adhering to the leaf
Damn that's cool...
Thanks for watching
How is the glue should dry before putting leaf on
Very nice would i use same technique to do lettering as well
Yes but you’d wanna use a vinyl stencil most likely
Hello, the viscosity is too thick to use with an airbrush, so what should I dilute it with? water? Thinner? alcohol?
Can I use airbrush compressor to use spay gun for base paint or clear coating for Harley tanks and fenders
No
how do I use 60 yr old gold leaf sheets where the gold seems stuck to the paper ?
You don’t
Why do you pull the tape before spinning the leaf?
How long do u wait to turn the gold leaf
You don’t have to wait
Can this product work on glass??
👍
1:37 why do you remove the making before spinning? 🤜🤛👍🙋🏻♂️🤷🏻♂️🤦♂️🌿
So you can correct imperfections on the edges before spinning also the can tape prematurely wear out your turning pads. 🙌
@@TimeWarpCustomPaint isn’t it like 3000 grit or something like that?
@@Deerslyr81 5000 grit is what comes with that spinner. I have seen people use 3000, but you have to be careful not to tear through
@@breedlofam this is going to sound bad , but remember I just started watching these videos to learn. I didn’t know that they came with anything on them. I was hoping to get mine and it have a part number for replacement parts so I could look it up and see what I needed 🤦♂️!! 🤜🤛👍🙋🏻♂️🤷🏻♂️🤦♂️🌿
@@Deerslyr81 also, go to Cratex and look up part number Q0166 and choose XF (extra fine). You can cut your own discs from a 6 inch stick and use double sided tape to attach it to the foam pad. It's going to take you a long while to use the disc it comes with though
Good day, I want to ask you for advice.
what can be replaced LiME LiNE Leaf spinner?
there is a war in our country and there is no possibility to buy it outside the border, I am from Ukraine.
thanks for the answer
Get yourself some velvet fabric, wrap it around a cotton ball or similar soft material (insulation from a coat if cotton balls can’t be sourced, maybe even bird down?) and rubber band or tape it to the end of your wooden dowel or stick. That’s how engine turning (spinning leaf) has been done at least the last 100+ years. All they’re using here is a piece of machined aluminum bar stock with a bit of Velcro (hook and loop tape) with a pre cut disc of 3m Trizact, 5000 grit sanding/polishing foam. You can also experiment with other fabrics you can source locally. Search gold leaf or Gilders engine turning tool for inspiration. It doesn’t take much to make a turning tool. Best of luck.
I can't buy the lime line stuff I need in the UK 🙈
Soon
👌❤️😎🔥🤘
Thanks for watching 🙌
I don't know how you all do it but for me I can't wear gloves not Evan when I change the oil they get in the way and trying to use Anything sticky not they just tick me offid rather has gluey and pant staindd hands lol than try and fight latex gloves lol