Teardown of CUKTECH No.15 150W & 20000mAh Power Bank
Vložit
- čas přidán 23. 07. 2024
- You can buy CUKTECH products on Amazon: www.amazon.com/stores/CUKTECH...
Or CUKTECH official website: cuktech.com/
If you wanna buy the tester of POWER-Z, you can visit our Amazon store:
www.amazon.com/s?me=A31UM8SRX...
Introduction
---------------------------------------------------------------
CUKTECH is one of the rising stars of high-performance power banks and chargers. We've taken apart its No.20 and No.30 power bank. Both models can support PD3.1, but may be a bit pricey for some people.
Today we’re going to take apart a more affordable option, the No.15 power bank.
Bill of materials (BOM)
------------------------------------------
Model: PB200P
Battery Cell: EVE
Battery Protection Chip: iCM CM1341-DAT
Protection MOSFET: AOS AON6512
USB-C1:
Buck-boost Controller: Southchip SC8815
Synchronous Buck-boost MOSFET: AOS AON6354
Solid Capacitor: CapXon
Output VBUS MOSFET: Toshiba TPCC8104
USB-C2/USB-A:
Buck-boost Converter: Southchip SC8721
Output VBUS MOSFET: Toshiba TPCC8104
MCU: ABOV A94P829
LED Driver IC: Titan Micro TM1643
Chapter
----------------------------------
0:00 Intro
1:51 Test
2:43 Teardown
5:03 Analysis
8:01 Summary
For more details. You can visit our website: www.chargerlab.com
For Business Inquiries: info@chargerlab.com
SOCIALS:
Instagram: / chargerlabs
Facebook: / chargerlab
Twitter: / chargerlab
Telegram: t.me/ChargerLABchannel - Věda a technologie
Is the PCB available in the market? Would like to DIY mine with at least 2 additional parallel batteries.
Can you check if this power bank supports passthrough (input+charging while using an output)?
The design could allow for it since USB-C1 and (USB-C2 and USB-A) are split.
This check would also be a nice addition to the general device capabilities introduction at the beginning :-)
Probably does support pass through. Because has 2 different chips for each usb c. The only problem is the capacity probably is 37wh at 30w output... i had something similar and was disappointing
@DooMMasteR If you look at the rated capacity is 11000 at 5v. While others are 12000 or 13000... so this powerbank has less capacity
Plus at 100w these cells output almost 7 amps continuous because there is no parallel there are only 4 in series.. thus i think greatly reduces the lifespan
@@VladStefanXPopa I mean the cells are rated for 1C continuous only so yeah, quite some overdrive.
But true the DC-DC efficiency of the UCB-C2+USB-A part at 5V is very disappointing.
@@VladStefanXPopaHi, you sounds knowledgeable about powerbank, can you help recommend me a good properly rated powerbank with a good lifespan?
CAN YOU MAKE A VIDEO? TEARDOWN FOR 45W UGREEN GAN CHARGER
PLEASE Review and Teardown of Romoss Power bank 65W 40000mah
Can you tell me the price of this power bank please?
59$
This Powerbank supports Xiaomi 120W Hypercharge
If 4 li ion 5000mah batteries connected in series you cannot get 20000mah, its still 5000mah only voltages are added not the capacity.
blud graduate from walmart
it is very common to only advertise total 1S capacity, regardless of the configuration, it is at least somewhat comparable, but Watthours are what counts.
The name of the brand is "CukTech"? Seriously? 😂
the cuk represents the recognition of the Čuk circuit, a special type of DC-DC circuit topology proposed by Slobodan Čuk in 1976.