What is NAMUR NE 43

In this video your will learn that
The Namur NE43 is a recommendation which gives a guideline how a sensor fault can be indicated to a control system by means of the 4-20mA signal.
The 4-20 mA signal is extended in such a way that it can accommodate all diagnostic feature without having to add any other additional hardware or special signal protocol.
Link to FREE E-BOOK on "ENGINEERING PIP STANDARDS"
www.asad-shaikh.com/
You can connect with me via
Website : www.asad-shaikh.com/
Linkedin : / asad-shaikh-a558b5105

[@AsadPassionateEngineer]

🔴Thanks for watching and if you have liked the Video then you can check out
👉 "Advanced Instrumentation" WhatsApp Community
Where you will learn from
1) Monthly Q&A session on Advanced Instrumentation Topics
2) Learning videos directly on Whatsapp so you learn distraction FREE
link to Join WhatsApp Group :
👉 www.asad-shaikh.com/whatsapp.html
Master Class on 👉 UDEMY
I am highly positive that you would find the Master Class super valuable.
Link to Udemy Masterclass : www.udemy.com/course/how-to-read-pids-piping-instrumentation-diagrams-symbols/?couponCode=LOWESTPRICE389
Keep learning and keep growing in your career !!! ✔

[@tals3226]

Valuable and trustworthy material 👍👍👍👍👍

[@noberttandilo1108]

Too much valuable information, thank you for sharing your knowledge.
I'm appreciate it, keep continue Sir 🙏🙏🙏
May God always bless you and family

[@AsadPassionateEngineer]

Thank you so much !!!
Your comment Made my day 😊 !!!
Glad you liked these efforts!!
God bless you and your family as well 😊!!

[@ankurbhatnagar4459]

Nice video Asad.
You tell the things in practical way.
I like it.

[@AsadPassionateEngineer]

Thank you so much Ankur for these kind words of appreciation 😊.
They mean a lot to me !!

[@midhunsarasakshan2515]

The informative video is explained in simple words. 👌

[@AsadPassionateEngineer]

Thank you for your kind words of motivation. It. Means a lot 😊

[@souravjha2287]

Wonderful.
I wonder why I dint found your videos much earler.
Thank you very much.

[@sudhirauti6295]

Firstly I under estimat this video but after watch full video then understand this is very very very important and grateful thank you sir

[@AsadPassionateEngineer]

So nice of you for this Kind feedback. Glad you found the efforts useful. 😊

[@Instrumentation010]

Good explanation

[@rikgto9351]

Thanks Assad!!! The graphics are great!!!

[@mithleshkumar9380]

Firstly I thought this video is useless, but I give some time and watching whole video, I genuinely recommend your channel to my colleagues. Very valuable information you shared but here's my suggestion please add some standards screenshots and exact words and last is .... this is little childish.... otherwise 👍 all the best for you efforts

[@AsadPassionateEngineer]

Thanks for your kind words of appreciation. It means a lot.
Will surely try to incorporate your feedback 😊

[@harshilshah4641]

Great learning !! Thanks

[@AsadPassionateEngineer]

Most welcome 😊

[@AMANKUMAR-pe3ys]

Very valuable information.....thanx

[@AsadPassionateEngineer]

Most welcome !! and thank you to you as well for your constant support. 😊

[@sachinv5291]

Thx for the information. Hw it is applicable for DI ?

[@arunanair3269]

Valuable video 🎉

[@AsadPassionateEngineer]

Thank you so much for your constant support, it means a lot. 😊

[@advaitlegend7254]

Very informative

[@AsadPassionateEngineer]

Thank you so much Advait ☺️
I am glad you found these efforts usefull 😊

[@soorajunnithan8424]

Awesome knowledge 🙏🙏🙏🙏🙏

[@AsadPassionateEngineer]

thank you so much Sooraj

[@TheHinaiibrahim]

Thanks

[@ronvanlohuizen7572]

Nicely done Asad :)

[@AsadPassionateEngineer]

Thank you so much !!

[@yogeshshimpi8461]

Valuable information

[@AsadPassionateEngineer]

Thank you so much! 😊

[@abdessamedghettas7167]

Great video thanks

[@AsadPassionateEngineer]

Glad you enjoyed it 😊

[@tariqueanwer9329]

Sir, Please make one video session on why we use end of line resistors for digital input & digital output & how we select value of resistance.

[@AsadPassionateEngineer]

oh okay sure 😊 Where did you mostly encounter this concept ? Horns and Beacons ?

[@tariqueanwer9329]

@@AsadPassionateEngineer yes today I found in my system cabinet many Digital input and digital output signals are unhealthy in System cabinet. Then I asked the reason from my vendor then he suggested me to fix 2.2 kohm resistor on Digital output and 10kohm resistor in Digital input.

[@swaminnathan1]

Good video

[@AsadPassionateEngineer]

Thank you so much !!
I am glad you liked the efforts ☺️

[@ahmedsaidi8852]

Nice vidéo.

[@AsadPassionateEngineer]

Thank you so much Ahmed Saidi 😊

[@jobybhavana]

👏

[@AsadPassionateEngineer]

Thank you John ☺️

[@_lets.get.fit.together_]

Could you pls make video on feature of transmitter : Advanced Diagnostics Plugged impule Line detection?

[@AsadPassionateEngineer]

Sure !! Yes that is an important concept especially for maintenance engineers.
Will surely make one video on that topic.
Thanks a lot and please do suggest if there are any other topics that you would be interested in in !! 😊

[@NarenderKumar-hq2to]

Asad bhai, what is the difference between NE-107 and NE-43, please make a video like that

[@divyangpatluwala7425]

Yes please Asad Bhai👍

[@AsadPassionateEngineer]

Sure Narendra Kumar will make a video on this interesting topic !!

[@AsadPassionateEngineer]

Sure divyang patluwala 😊 !!

[@stalone1515]

how if transmitter connet to PLC? is the same. plz respond

[@rajsharma3786]

Sir plz explain what is namur?

[@Instrumentation-Control-Eng]

What about self powered instruments