Gas Grill Not Getting Hot

Here are some things to check if your gas grill burner is not getting hot enough to cook your food or the burner is not coming on at all. Check the propane tank make sure that it is not empty. If you are using natural gas check your supply line if safe to do so.
Check the burners for blockages. Turn off the gas and disconnect the fuel line, check the burners for blockages such as rust, grease, carbon, mud daubers and rodent nest that might be blocking the burner openings.
Clean the the burner tubes with a wire brush. Make sure the the burner tubes are still in-line with the burner valves.
Gas regulator if you are not getting any flame from the burner your regulator may be faulty not allowing any gas to flow through it.
Check the ignition system. if you have a single spark ignition system you will get a single spark every time that you push the button. This system is usually found in older models and the cheaper grills. If you have the electronic style
ignition system it is usually a push button system that is a continuous spark to ignite the flame listen for the continual clatter of the ignition system some times this ignition system is built into knob and sparks the flame while turning the gas knob on. If you cannot hear the clatter it may be as simple as replacing the battery. This is only a couple of examples there are several igniters on the market.
If you are not comfortable with these checks please hire a professional grill tech or call customer service for your grill.
👉 Disclaimer: Fix It John and affiliates are not responsible or liable for any loss or damage caused by your understanding or interpretation of the information in the videos. Always use safety precautions, and protective wear, and refer to manuals, other websites, books, or advice for projects contained on this website or in these videos. The videos are to be for learning purposes, but not guarantees, solutions, or answers. Always use precaution and safety in every project that you do. Fix It John recommends using safe practices when working on any project in every aspect. Any damage, loss, or injury resulting from the improper or incorrect use of equipment, tools, etc., or from the information contained in the videos at Fix It John or on fixitjohn.net is the sole responsibility of the user and not Fix It John
This video is to help my viewer to fix it themselves and to help instill confidence in one's own ability to do so.

[@poolmotorrepairguyFL]

The Florida pool pump motor repair guy 32750 approved ! that was good info & see Good dog

[@frantzp.4087]

John, good to know since I have the same model. Thanks for sharing.

[@talsilverman8870]

Thank you! Great video!!!

[@apexcustomsmokers]

0:50