Video není dostupné.
Omlouváme se.
BMW E36 (Engine runs bad) Engine not running good, common problem $25 fix, Rough idle
Vložit
- čas přidán 2. 11. 2021
- BMW E36 (Engine running bad) Engine not running good, common problem $25 fix.
BMW 328i Engine not running properly, how to fix BMW E 36 engine that is not running good,
BMW E 36 bad running engine fix.
BMW 325i BMW 328i motor not running good fix
BMW E 36 vacuum problem.
BMW E 36 common vacuum problem making the motor not run good.
BMW E 36 motor stalling at idle repair.
Here’s a link to the entire Corvette C3, Restoration series, every episode in a row
👉 • Corvette C3 restoratio... ✅
Here Is a link to the automatic to manual transmission swap videos in a row👉 • BMW E36 manual swap, a... ✅
Here is a link to all the BMW E 36 videos, Complete Restoration Series all episodes 👉 • BMW E36 Restoration, E... ✅
Automatic transmission removal👉 • BMW E36 Automatic Tran... ✅
Manual transmission Removal👉 • BMW E36 Manual transmi... ✅
BMW e36 manual swap parts list video👉 • BMW E36 parts you need... ✅
Clutch pedal, clutch master cylinder slave cylinder installation video👉 • BMW E36 Manual swap cl... ✅
Manual shifter installation👉 • BMW E36 (shifter Insta... ✅
Fly wheel, pressure plate, clutch disk installation video 👉 • BMW E36 Fly wheel, Pre... ✅
Manual transmission installation video👉 • BMW E36 manual transmi... ✅
BMW E 36 intake manifold installation episode👉
• BMW E36 intake manifol... ✅
manual swap. Automatic transmission computer chip removal video👉 • BMW E36 ( Manual swap ... ✅
Reverse lights and safety neutral switch manual swap video 👉 • BMW E36 manual swap, s... ✅
Instrument cluster lightbulb removal video, for auto transmission light👉 • BMW E36 Instrument clu... ✅
#BmwE36
#BmwE36ManualTransmissionSwap
Johnny Depp look alike! also this was perfect for fixing my starting and idle issue, Had my e36 start and die, or run if you give it gas and have a rough idle (also throwing 10 codes btw), checked my hose after seeing this and found it was cracked and replaced it.
this solved 4 of my codes so big thanks to you!!
Lol
No problem thanks for watching
If you ever start on an E46… I’ll be watching every single one of those videos. I have a 330i and it has a lot of issues 😅
Thank u so much, this video was very helpful, GOD bless the works of your hands
I just bough 320i and the problem is sometimes rough some not when idle, ill try to check that hose 👍
I LOVE YOUR CHANNEL!!! THANKS!!!
Thanks for the incredible feedback Taylor :)
I had the oil/water seperator come lose after a backfire; it connects to that intake boot.
I had loose head bolts, just retorqued, same car.
I had electric fan go bad; took out electric fan and shroud!
Had to replace the custom heater hose return from the back of block; bipassed heater!
Otherwise good cars! :)
You're awesome bro 👊🏻😁
Thanks
Its the hose for the idle control valve.
Yes, I know that now but did not when I was making the video
@@ProblemSolverGarage found your channel from your 944 videos. The idle control valve hose was cracked on my 944 also, and ran poorly with those exact symptoms. Not sure what's up with these hoses - they all seem to go bad
I bought an e36 which seemed in very good shape, just hasn't Ben driven for 5 years, after getting it home I realised it was a big money pit, first I had electrical issues and the battery was draining from full to dead in on night, the second problem was that the battery wasn't charging while running, replaced the alternator with a new one and it's still not charging, everything else put to side it has probably vacuum leaks because is running to fat, you can smell pure gasoline coming from the exhaust, changed the o2 sensor but this didn't help with either, replaced the headlight with new ones because the old ones were faded, and after I installed the new ones, just one headlight is working and the second one is not, I'm slowly losing my mind with this car 🤮🤮🤮 i want to fix it, I want to drive it but it just breaks one thing after another, I hope I'll get it running good so I can pass smog and drive it for a little bit to boost my moral, otherwise I'm gonna remove Al the new parts and I'm gonna crush it no matter what 😥
Same prob exactly same
What did it sound like prior
Irregular idol, when it was cold it would want to stall, it ran better with the mass flow sensor disconnected
Hi guys i need help i have a 325i multivalve its idles perfect revs up nice as soon as i climb up a hill or try to take off in a incline it miss fires and there's no power
I have a 98 328i starts runs fine will not idle on its own I replaced the holes you are talking about and still have the same problem any idea why the car will not idle?
Maybe there’s another vacuum leak somewhere EGR maybe
Sometimes they pop out or the gasket goes on them, that hose hooks up to it, it hooks into the intake manifold
I have a little rough/ oscillating idle when i put on the blower fan or roll all windows down at ones. Is that also a false air/ vacum leak thing?
Did you find this please let me know I have the same problem😅
@@andrewmclaughlin1086 yoo not yet, got a new battery and alternator, that didn’t do a thing . My next plan is to look at the modules behind the glove box and the dme. Also i will check the electrical resistance of the ICV.
@@DIRTYvinnieXD let me know if you ever figure it out please 🙏
@@andrewmclaughlin1086 i will, do you drive a convertible?
@@DIRTYvinnieXD yessir
👍👍👍
Your the guy who scares the next guy
What does that mean? LOL
your videos aare very helpful
hey bro, i am subscribe to you channel and i need help i replace my foglights and i replace my headlight Bulbs on my 1998 328i convertible now the brand new fog light wont turn on and the headlight work but the dash keep telling me low beam failure. the funny thing isa the headlights are working. i check the fuse all are good but the Fog lights just will not turn on. when i press the fog lamp switch the high beam bulbs comes on but they look like a park light. i am have found now one or no video on how to fix that. my last resort is to just put the Fog light on a seperate circuit just run separate wire.
OK so whats probably going on is your plugs that the light bulbs plug into are corroded so you’re losing a ground somewhere, remove all the plugs and clean everything really good with a piece of sandpaper or utility knife so it’s all bare metal.
As for the headlight failure, I have a video on that you need to add a resistors to the circuit.
Here’s a link to that video czcams.com/video/EAYO7eIgyz4/video.html
Why didn't you just change the hose
I didn’t have one
I mean I just went to orielly and bought a gates hose for $18
I live in a town in the middle of nowhere, no BMW parts here. I just didn’t want to wait for it if I ordered it
minutes
sounds like rod knock
Just needed a good oil change, previous owner didn’t change the oil for years it look like, sounds good now