Scotts S1642 / Tuff Torq K51 Input Shaft Replacement
Vložit
- čas přidán 26. 08. 2024
- In this video, we replace the input shaft, pulley, fan and transmission belt on a Scott S1642 lawn tractor. In my case, the pulley was the most worn component.
Input shaft kit: amzn.to/3z1RxXn
Transmission Belt: amzn.to/4bV9Z2m
Fan: amzn.to/4ekA0d9
Pulley: amzn.to/4emRzZU
Outstanding Video - I’ve done so many of these over the years and watched a lot of tutorials but you’re the only one who explained why the shaft sometimes won’t align with the hole in the pump - that would be by moving the shifter lever
Excellent!!
Mikes Equipment Repair Co Westford Mass
Thank you very much! Appreciate the compliment!
The failure of the fan pulley against the splined shaft is due to fretting corrosion. Can be avoided by coating both oj the mating parts with a heavy moly grease or gluing the two together low strength loctite.
I *think* you may have forgot to install the C-clip on the new shaft, the one that you said that you didn’t need to remove from the old shaft.
Left tire has some concerning wear. Almost makes me wonder if the axle is bent.