Resistor SMD Code

For more information, visit www.resistorguide.com/resistor...
Because of the small size of SMD resistors, there is often not room for the traditional color band code. Therefore, the resistor SMD code was developed. In this video you learn in 3 minutes how to read the most common resistor SMD codes: the three and four digit system and the EIA-96 system.

[@seannot-telling9806]

Thank You.
You made the most sense so far in just about 3 minutes.

[@Layoric1]

what is value when resistor is marked "3k60" ???

[@pocoace5415]

wow this is so important detail thank you for uploading this it really helps my assignments

[@Fireloop77]

Perfect explanation, thanks!

[@dcpowered]

Excellent! Informative and short video. Thanks!

[@mrbritcoinnakamoto2793]

thanks one question does it matter wich way the currant flows through them ?

[@nor4277]

Will our multimeter's read these resister directly,or do we need smd fweezer meter, or how about scr meters,which is best to test these resistors with anyone

[@agstechnicalsupport]

Resistor SMD codes and code schemes very well explained, thank you !

[@jamalforest1993]

dunno if anyone gives a damn but if you guys are stoned like me during the covid times then you can watch all the new series on InstaFlixxer. Have been binge watching with my gf for the last couple of months xD

[@mekhigary3241]

@Jamal Forest definitely, been using instaflixxer for months myself :D

[@vaibhav9as]

You are best in terms of giving content

[@seanvgmusic3630]

Very helpful and clear! Thank you! :)

[@dardofortunato7444]

Hola, muy buena información.
Consulta tengo una resistencia smd con el siguiente código x10?
Como no trataron este código querría saber si es de 10 0 de 100 ohms.
Saludos

[@samisulaiman7967]

thanks how to know the difference between MSD capacitors and MSD resistors if they have no letter or number how to know if these parts are broken how we know the value of them , I have similar MSD capacitors and resistors on mini STB powered by 12V and I found 2 are broken but I didn't see any number on them any help where can I buy them thank you very much

[@damontellegen3569]

Fantastic job

[@ZilogBob]

I'm glad I've never encountered that EIA numbering system. Needless overcomplication.

[@DjRicolaz0328]

Thank you sir for sharing your vedio.. God bless.

[@dandemir5893]

I saw some resistors have not any code. So how can I find code for them ?

[@darkote87]

how find 2RD SMD capacitor ?

[@sido2335]

Good job

[@franciscomaldonado3903]

muy buena información aunque un ya tenga conocimiento sobre esto siempre hay cosas que todavía uno no sabia

[@coondogtheman]

I have a backlight inverter from an LCD TV and it has a slight burn mark on the back of the inverter board, on the other side there are four resistors with 0's on them and one looks burned. They are all connected to the same trace. Would it be ok to bridge that part and bypass those resistors? I'm assuming that the 0 on the resistors means no ohms of resistance which is basically like direct connection. I was going to scrape the trace which are thick and solder a wire onto them and connect the two.

[@affapple3214]

I think yes it would be okay, 0 ohm resistor normally is used as a bridge itself, and normally it wouldn't bring a problem if you substitute it with a wire, but take this with a grain of salt

[@coondogtheman]

@@affapple3214 I did that and the TV did the same thing. Still chasing this issue.

[@leon-fg9lb]

Big Thinks 🙏🏻♥️

[@Bonjour-World]

Excellent. Thank thee :-)

[@tinnakornphuseedin9296]

What value of 7D0 SMD?

[@rcgo2411]

Thank You!

[@hellopandit9]

thank you

[@prasenjitpaul5398]

Sir, what will be value of 0805 SMD, ?

[@prasenjitpaul5398]

SIR, what value of 0805 SMD ??

[@djemorekcuf8304]

nce tutor!!👍👍👍😀

[@MarsKheyga]

47-16L (2) BD diode or resistor or capacitor...????

[@13anomalous16]

what if the resistor doesn't have a code or any other letters

[@RB-nh8ui]

Me gusto por claro como saber los ohms de las resistencias superficiales de precisión..

[@williamoseo3277]

Why not put the exact values for easy identification or reading? Just like in color coded Resistors.

[@zohaibmalik5940]

nice video

[@jozsiolah1435]

The smd resistors can be calibrated, but must not be removed. Power banks calibrate the 200 and 000 types. The trick is solar charging or and car charger (5.8v). The calibrating may take for weeks. Doing this, a car user can benefit using a power bank, while others will not be able to use it with higher capacity and faster charging. Calibrating to5.8 v will be better at 5.0 v as well, and the supported best charger is Samsung or Apple.

[@teobaldojimenez7426]

Very well ,......tj. de ecuador.

[@zahidmehdi4290]

331???

[@ManiaDepre]

What does L35 mean on a SMD fuse?

[@Sm0rezDev]

I think it's mean amps it can handle.

[@m-luthfi]

So 103 and 1002 basically same, right?

[@hafizahmad5036]

01c and 30c how read method plz tell I waiting your reply.

[@zico3239]

what is the value for 183 with underline ?

[@Jonas_Meyer]

+underfloor heating installer 0.183 Ohm. I only refer to this video. To be sure i would check the datasheet of the resistor.

[@f2tehnik01]

WOWW.... NICE, GOOD, BAGUS, MANTAP....

[@mdmahmood3030]

sir how to check 10k resistance

[@Mehrunes86]

Thanks for the video.
I need to change a smd resistor, code R050, is 0,05 ohm.

[@MLS.22]

and the t code ?

[@JACKIEYJACKIEY007]

Thanks

[@birendrayonghang8805]

great

[@mrter2011]

thanks

[@Oldcityeses]

010 direnç nedir ?

[@MARCIO-wi9to]

alguem tradus ai,.

[@jhoan29pigar34]

what is the messure of zero smd resistor, it is reversing or infinity when i use a digital multimeter

[@Bonjour-World]

Zero ohms. They are sometimes used to "hop" over traces on a singled sided PCB.

[@kelumsenadeera8771]

Good

[@daniellee6912]

what is a 0 ohm resistor used for?

[@RmFrZQ]

+Daniel Lee it will act as fuse.

[@VikasKumar-iu7tl]

Daniel Lee

[@robertsanchez630]

hi everyone ,if anyone else wants to learn about how to make digital circuits try Sovallo Circuits Expert Fixer (do a google search ) ? Ive heard some extraordinary things about it and my mate got great results with it.

[@ZilogBob]

Completing a circuit when a PCB trace has to go underneath it.

[@Iulius4]

RmFrZQ Gracias!

[@amitthakur8802]

sir smd rasitar mospid diod ki pahchan kiase kare

[@vijayanand3218]

SMD PTC A How to find out plz sir

[@alzaabialzaabi]

How to measure 20k ohm ? I got mad

[@mother-fng-bonswa3612]

what you mean.. with a multimeter? your ohm should be on 200 K / on 20K it maybe give you until 1999, otherwise 1. on 200 k . 0.200

[@deepakangre9307]

4digit resister390e

[@d0ugparker]

Excellent. It was exactly what I needed. Thank you.
At 1:55, "deviated," the first "e" is long, not short, "dee," not "deh." At 2:25 and other times, "represents," the first "e" is short, "reh," not "ree."
Respectfully submitted.

[@mehdipouresmaeil7964]

hello for this vedio, but 382 O means that 0.328 KOhm not OHM

[@rcxb1]

You much too quickly glossed over that whole "underlined" thing (and did so after presumably being done talking about 3 digit codes), which can cause a huge error when looking at 3 digit codes...

[@thineshraja7145]

thanks for u send with me resistor code dedails

[@gung49]

Why they make it hard,
why not just write it "3k1" instead of "312".
Who on earth would think "233" means greater than "312"?
And if they can write that small, why though hole one still use color?

[@PlacetecAGLiestal]

Resistor SMD Code

[@bombshell31600]

lol.......omg sry bud...

[@NGU7754]

"SMD" LOL.

[@gavincurtis]

That EIA-96 look up table system was designed by a lazy hack outfit. Why have a system that works from memory when it can be replaced with a lookup pocketbook chart instead? Who came up with this garbage? Add a color multiplier band and you have it,