CARBURETOR ADJUSTMENT SCREWS on 2-Stroke - (How it actually Work Inside)

Sdílet
Vložit
  • čas přidán 22. 09. 2021
  • * VISUALLY EXPLAINED
    Fuel Adjuster Screws explained from a unique perspective of actually being inside the carburetor, this video show how the Fueling System works for the Tuning Adjustments Actually Works.
    This unique video goes deep inside the Carburetor and explains how the fueling system is actually operating during the Chainsaw Tuning Adjustment process and what structures withing the Carburetor allow it to do so.
    Increase your knowledge of how the Two-Stroke Carburetor to help make you better at diagnosis and repairs. A vital part of your Toolbox is knowledge. Without knowledge, no one can fix anything.
    Sit back and be amazed!
    This principle works for most types of Chainsaw saws, and the following also helps with Chainsaw maintenance. So, whether you are using a Stihl Chainsaw, Husquvarna Chainsaw, basically, all types of Petrol Chainsaw are valid for this principle, as well as many types of or a 2 Stroke Engine. The Electric Chainsaw, of course, escapes this whole principle!
    If, by the way, you are having problems with your Chainsaw Not Starting, then please do take look at my other video, where I help you get back you and running again if your Chainsaw Won't Start, or your Chainsaw Won't Stay Running. • Chainsaw WILL NOT STAR...
    If you need a easy to follow video on Chainsaw Carb Tuning. So here I take you step by step should the Chainsaw Carburetor Adjustment be required: / watch
    v=74p9FLmIkkw&t=47s
    Here is a detailed instructional presentation type video of mine explaining the meat and bones principle of why a Chainsaw Bogs Down: • Chainsaw Carburetor Pr...
    All images in this video are Copyrighted to Craig Kirkman of The Repair Specialist.
    Many thanks indeed
    Craig Kirkman (Owner and creator of The Repair Specialist Channel)
    Please check out my amazon shop. I have recommended some useful items from Amazon below.
    I guarantee you that these items are the sorts of things I use on a daily basis so I know they are good. I have to be careful in recommending products because I have my name and credibility at stake.
    So I will only recommend good products. www.amazon.co.uk/shop/therepa...
    #FuelAdjusterScrews #CarburetorInsights #ChainsawTuning #CarburetorExplained #ChainsawMaintenance #2StrokeEngine #ChainsawRepair #EngineTuning #FuelMixture #ChainsawPerformance #CarburetorDesign #ChainsawEngine #ChainsawKnowledge #ChainsawDiagnosis #EngineRepairs #CarburetorOperation #FuelSystem #ChainsawTips #StihlChainsaw #HusqvarnaChainsaw
  • Auta a dopravní prostředky

Komentáře • 106

  • @TheRepairSpecialist
    @TheRepairSpecialist  Před rokem +3

    Hi guys I just wanted to Introduce to you my other Channel "Things to Know" - which i'm just getting started. It's a go-to channel for insightful worldly explanations, handy tips, and expert advice on everyday things and repairs of domestic items. Here is the link: czcams.com/channels/O8P9x5kUZ44Fb11vanLFsg.html

  • @obbiebeal3060
    @obbiebeal3060 Před 2 měsíci +3

    👍👍👍👍 10,000 Times from all of us who are in the BUSH and have a new C S and no knowledge of how to adjust a chainsaw. There are many good videos, but the close-up views is the BEST .May our CREATOR bless you.

    • @TheRepairSpecialist
      @TheRepairSpecialist  Před 2 měsíci

      Thank you so much. I really appreciate it. And my our creator bless you to. Craig 🙏👍👍👍

  • @kjell-richardlvdal373
    @kjell-richardlvdal373 Před 2 lety +6

    Best video on CZcams on how 2 stroke carb works

  • @henningpangels6208
    @henningpangels6208 Před 3 měsíci +2

    FINALLY! I've been hoping to find your kind of material for a long time - explaining how to fix things by explaining how they work, so much better for me than just "hook the red tube to the brass nipple" type instructions. Thank you, I'll be watching many others I'm sure.

  • @jwsl728
    @jwsl728 Před 20 dny +1

    you are so professional. I fixed my chainsaw because of your video. thanks a lot.

  • @markyakubovsky3380
    @markyakubovsky3380 Před 6 měsíci +3

    Outstanding!!! I knew how to adjust the carbs on my chainsaws, but as I was trying to teach my son I stumbled to try to explain it- I just didn't have the right words. Thx to several of your videos I was able to sit him down to watch it and He and I have a whole new understanding of the process. Thx for your time !!

    • @TheRepairSpecialist
      @TheRepairSpecialist  Před 6 měsíci +2

      Thank you so much for your kind and encouraging feedback. Craig 👍👍👍

  • @barefootarts737
    @barefootarts737 Před 10 měsíci +2

    Best explanation I have ever heard. I like the audio clip of what happens as you continue to adjust for lean running past the optimal.

  • @djbobbyd3985
    @djbobbyd3985 Před 9 měsíci +2

    This guy is total amazing... This video goes into so much depth explaining everything there is about chainsaw carburetors... I wish I could find a video like this one on riding mower carburetors. Thank you for all the time you put into creating this video..

    • @TheRepairSpecialist
      @TheRepairSpecialist  Před 9 měsíci

      wow, thank you so much for your kind feedback. I really appreciate it. Craig

  • @kevinbyrne4538
    @kevinbyrne4538 Před rokem

    Thank you for preparing and posting this video. It was the best explanation of the operation of a carburetor which I've ever seen.

  • @krehbein
    @krehbein Před 2 lety +4

    What an informative video! My whole life small engines in the likes of a weed wacker or blower have always stumped me. Eventually they fail and I'm left debating a repair cost or buying new. This video will play a role in my education on engine repair. thanks!

  • @mikon3270
    @mikon3270 Před 2 lety

    Very clear and to the point!
    Thankyou for sharing.

  • @toffser
    @toffser Před 2 lety +2

    Absolutely brilliant please keep them coming

  • @davidmccarty927
    @davidmccarty927 Před 2 lety +3

    Craig, thanks again for your insight and tech explanations. Further to my earlier ( lengthy) comment, I have successfully tuned my Husqvarna 128ld string trimmer. I have no idea how many of your videos I've watched but consider them to be superior to all of the others on CZcams on this subject. I have one suggestion which may have negatively influenced my initial lack of success tuning my engine. I knew I ought to tune with the engine under load so was using my gas clipping blower. The horrible racket and vibration obviously indicated that there was something wrong with it, Rather than continue to mess around with it, I withdrew to my trimmer attachment and within a very short while my engine purred like new. Maybe that will help someone else. Thanks again.
    Dave in Houston

  • @shaunshepherd9097
    @shaunshepherd9097 Před 4 měsíci +2

    Brilliant explanation

  • @terrymcdole6906
    @terrymcdole6906 Před 2 lety

    Another great video, but you can't stop now, need one on adjustments. Keep up the great work. 👍

  • @dave.sanger1726
    @dave.sanger1726 Před rokem +3

    The best vid iv seen on this subject. Well done !

  • @detroitredneckdetroitredne6674

    Hello from Detroit Michigan brother thank you for sharing your knowledge and expertise it will really help me out with my project thank you so much for the information

  • @michaelturocy3319
    @michaelturocy3319 Před 3 měsíci

    An absolutely perfect explanation of the true purpose of the Hi and Lo needle valves!
    I probably witnessed the smallest insect on camera... @ 8:48 there is a bug checking out your metering pin area in the carb 😁

  • @RaleysSmallEngines
    @RaleysSmallEngines Před 2 lety +4

    Yes Sir ! You did it again ! Another great, very detailed video that will be easy for anyone to understand. Thanks for sharing and keep up the great work my friend.

  • @DavidJones-smiley
    @DavidJones-smiley Před 2 měsíci +2

    Great video help me adjust my carb on chainsaw easily now that I know what’s going on!

    • @TheRepairSpecialist
      @TheRepairSpecialist  Před 2 měsíci +1

      Great to hear! Thank you for letting me know. Craig 👍👍👍

  • @danwison6058
    @danwison6058 Před 7 měsíci +1

    I agree with you in that understanding the functionality of components within a system helps one troubleshoot and repair it immensely. Thanks for the informative video

  • @TheRepairSpecialist
    @TheRepairSpecialist  Před rokem +1

    All Episodes -for 2-Stroke Carburetors Here. Thanks. Craig:
    czcams.com/play/PLrlXp3PlwgRI5OLvm3P91LJr1CYnO5TRD.html

  • @briansmythe3219
    @briansmythe3219 Před 2 lety

    Thank you sir verry helpful and well explained

  • @flynn6737
    @flynn6737 Před 6 měsíci

    Cobber! Thankyou Thankyou Thankyou.
    Learning how it works has solved an issue I was having.

  • @davidhansen4471
    @davidhansen4471 Před 2 lety

    as always 10 stars thanks again

  • @carterkareroa2238
    @carterkareroa2238 Před 2 lety

    The man 👍 great video tutorials ❤️

  • @mupcountry7153
    @mupcountry7153 Před 2 lety

    Your videos are the best!

  • @courtneyroy270
    @courtneyroy270 Před měsícem +2

    Astonishing really, your a genius man, and a nice one

  • @rshutterbug47
    @rshutterbug47 Před 2 lety

    Thank You For The Best Explanation I've Ever Seen & Heard & I'm Going To Share With All 3 Of My Son's & Several Friends & I'm So Glad I Found You & Your Fantastic Videos, ☆☆☆☆☆ ,
    👍👍👍👍👍

    • @TheRepairSpecialist
      @TheRepairSpecialist  Před rokem

      Thank you so much for your nice feedback. I really appreciate it. Craig

  • @chrischeatwood9468
    @chrischeatwood9468 Před 3 měsíci

    Awesome video

  • @guybishop61
    @guybishop61 Před rokem +1

    Excellent video, very educational, thanks 😊

  • @beannpersad8071
    @beannpersad8071 Před 2 lety

    Thank you sir, for this detailed explanation. U are a master teacher, I keep looking at your videos over an over. U have help me alot, . may god bless you always. From Trinidad.

  • @mackmike243
    @mackmike243 Před rokem +1

    Thanks for this opportunity to understand the 2 stroke engine

  • @louisschoon903
    @louisschoon903 Před 8 měsíci +1

    by far the best video on this topic i have found. thank you

  • @andresdominguez7021
    @andresdominguez7021 Před 2 lety

    Thank you very much...

  • @davidlis6709
    @davidlis6709 Před rokem +1

    Excellent

  • @Mike_5
    @Mike_5 Před rokem

    Fantastic this is the video you need in your life to get your petrol tools working properly!

    • @TheRepairSpecialist
      @TheRepairSpecialist  Před rokem +1

      Thank you for your awesome response. I really appreciate it. Craig

    • @Mike_5
      @Mike_5 Před rokem +1

      @@TheRepairSpecialist You are welcome Craig it really is a very good video

  • @dc6233
    @dc6233 Před 11 měsíci +1

    Just found your channel and subscribed, these are some great explanations, the animations truly help!!

  • @ranjithpranju6227
    @ranjithpranju6227 Před 2 lety

    Thank you so much
    Now iam learning that mechine repair at shop

  • @emilianohernandez691
    @emilianohernandez691 Před rokem +1

    Thankyou ,very informative.

  • @HoustonR6ryda
    @HoustonR6ryda Před 2 lety +1

    appreciation like # 485...awesome illustration and instruction- Thank YOU.

  • @benrees8797
    @benrees8797 Před 2 lety

    Brilliant

  • @heichfung461
    @heichfung461 Před 5 dny +1

    Thanks for the video.

  • @toddbarton2014
    @toddbarton2014 Před 8 měsíci +1

    Excellent thank you

  • @goneviral6037
    @goneviral6037 Před rokem +1

    Amazing!!!

  • @bartkeijzers9538
    @bartkeijzers9538 Před 2 lety

    Good morning, your videos are very helpful and educational so thanks a lot for sharing! However I do have a question, in which sequence do I have to adjust de carburator? First H, then L and subsequently the T? Thanks a lot for your response! Regards Bart

  • @alvarosilva583
    @alvarosilva583 Před 2 lety +1

    Hello im from uruguay very gud master

  • @mk1cortinatony395
    @mk1cortinatony395 Před 2 lety +1

    How does the fuelling change when cutting? If the extra load needs more fuel maybe?

  • @larryanderson8049
    @larryanderson8049 Před 2 dny

    Are there any air bleeds or emulsion tube action in the chain saw carburetor? thanks in advance..

  • @benchippy8039
    @benchippy8039 Před 2 lety

    Does anyone have any ideas why my husky k760 looses power mid Rev when I’m cutting? It seems to happen when I tilt the saw to cut. There’s plenty of fuel and it’s in otherwise good condition

  • @1rcav8tor
    @1rcav8tor Před měsícem

    Can you rotate the fuel inlet nipple to align to fuel tank ?

  • @justharryjohnson7250
    @justharryjohnson7250 Před 2 lety +1

    I fly a paramotor. Its a 2 stroke engine with a wb 32 walbro carb its not been running right then I noticed there is a spacer that is supposed to go between the carb and engine. I put it back on and it made it very very lean it would not run at all and needed around quarter turn rich on low end. Any idea why this would be . Why or how does an extra spacer between the carb and engine make such a large difference

  • @twopiecez5226
    @twopiecez5226 Před rokem

    Hello
    Good day, I just like to ask on
    what is the proper way I need to do in my chainsaw after i USED and it will be stock for a six month before I used it again

  • @longdriver2
    @longdriver2 Před 2 lety +2

    Very good explanation. Nice job and it clears up the mystery. What was the little thing crawling in the carburetor at 10:10?

    • @cesardavrieux3767
      @cesardavrieux3767 Před rokem

      ¡Buen ojo! Parece un pequeño insecto, que se arrastra y camina doblando en esa esquina.

  • @d.h.1397
    @d.h.1397 Před 11 měsíci

    what about the idle screw? when tuning a carb. do I need to back the idle m screw out til it's barly budging the arm?

  • @patrickess8326
    @patrickess8326 Před rokem +2

    Watch your videos in PNG, and really impressive and helpful.

  • @thomaswalz3515
    @thomaswalz3515 Před 2 lety +3

    I've found that the adjustment of the L screw also affects how quickly the engine responds from idle. There is a happy place in this adjustment.
    I really appreciate your drawings/animations. They have cleared so much up.
    I'm presently flummoxed by a 028 Stihl Wood Boss saw. With the spark plug out of the engine, I get good spark. With it in, it behaves as if there isn't any spark. The plug comes out wet, every time. The plug is new, as is the coil. The flywheel is where it is supposed to be. What gives?

  • @nawaveseru4060
    @nawaveseru4060 Před 2 lety

    Hy there sir..my makita chainsaw is at high speed then die out what is the problem..without pressing the speed

  • @davidwarwick8194
    @davidwarwick8194 Před 9 měsíci

    Hi Thanks for a great video, quick question, as a rule does the low screw always let fuel into the carburettor on the outlet side of the venture?
    Many thanks David

    • @TheRepairSpecialist
      @TheRepairSpecialist  Před 9 měsíci

      Hi David. First of all, thank you for your kind words, i really do appreciate it. Secondly, yes, from my own experience with carburetors anyway, the L (LOW) Screw is always on the outlet side, and so the closest of the two adjuster screws to the carbs outlet to the engine.
      Thanks again
      Carig

    • @davidwarwick8194
      @davidwarwick8194 Před 9 měsíci

      Hi Craig, thank you for giving me a great understanding of how a carburettor works, with the knowledge you given me I’ve traced the issue back to the hole at feeds the High rev adjustment being blocked with a piece of metal, (maybe the previous owner has over tightened the adjustment screw and snapped the end off ?) unfortunately it’s jammed so it looks like I need a new carburettor. 😢

  • @michaelbiggins7533
    @michaelbiggins7533 Před 6 měsíci

    good video but beyond the average bloke? what they dont tell you is which screw is which? early ZAMA threads are same size BUT needle ends are not the same! A big help would be a comparison of low and high screws side by side ,so they cannot be screwed back in wrong holes ?

  • @inductor1.77
    @inductor1.77 Před rokem

    I have a jonsered 450, do you know which screw is longer? I pulled the screws outcbefore noticing they ate different lengths.

    • @TheRepairSpecialist
      @TheRepairSpecialist  Před rokem

      If they are not different lengths or thickness then it most probably doen't matter which one is which and either will be ok in either hole. Some are designed like this, but take a very close and thorough look to distinguish the sizes first, then if you are happy they are the same size then you can decide, or not, to just fit them in either hole.
      I hope this helped
      Craig

  • @spelunkerd
    @spelunkerd Před rokem +1

    Do you have an easy explanation regarding why a lean state during high rev's causes the engine to run at higher rpm? Intuitively I would have thought that if there wasn't much fuel around, the rpm's would drop. That doesn't happen, but I don't understand why.

    • @TheRepairSpecialist
      @TheRepairSpecialist  Před rokem +1

      I certainly do. Here is the Link. I hope it covers what you need. Craig : czcams.com/video/CHtu28AJLQ0/video.html

    • @spelunkerd
      @spelunkerd Před rokem

      @@TheRepairSpecialist Yes, that's helpful, thank you Craig. More efficient when lean but because lubrication comes from the mixed fuel, there is a compromise to prolong engine life.

  • @JeffAldridge-eu5fs
    @JeffAldridge-eu5fs Před 5 měsíci +1

    What's wrong when the saw cranks up and revs high and shuts off

  • @7Toki777
    @7Toki777 Před 11 měsíci

    Hello guys! Can someone help me? Do the adjustment screws have to be airtight? I have an air leak issue with my chainsaw. I already checked everything, but I can't find the leak. Thank you!

    • @TheRepairSpecialist
      @TheRepairSpecialist  Před 10 měsíci

      Hello!
      Of course, we're here to help. When it comes to carburetor adjustment screws on a chainsaw, they don't need to be airtight themselves. However, the carburetor as a whole should be airtight to ensure proper engine performance.
      If you suspect an air leak in your chainsaw, it's essential to address it promptly because air leaks can lead to poor engine performance, including difficulty starting, idling issues, and loss of power. Here's what you can do to track down and resolve the air leak:
      Inspect Gaskets and Seals: Check the gaskets and seals between the carburetor, intake manifold, and engine block. If any of these are damaged or worn, they can create an air leak. Replace any faulty gaskets or seals.
      Tighten Fasteners: Ensure that all screws, nuts, and bolts on the chainsaw's engine and carburetor are properly tightened. Loose fasteners can contribute to air leaks.
      Check Fuel Lines: Examine the fuel lines for cracks, splits, or loose connections. Any damage to the fuel lines can introduce air into the system. Replace damaged fuel lines as needed.
      Inspect the Intake Boot: The intake boot connects the carburetor to the engine. Make sure it's in good condition and securely attached to both the carburetor and the engine.
      Use a Carburetor Cleaner: With the engine running, you can carefully spray a carburetor cleaner or a flammable aerosol like starting fluid around potential air leak areas (carburetor joints, gaskets, seals). If there's an air leak, the engine's RPM may briefly change when the cleaner is sucked into the leak.
      Professional Inspection: If you've checked all these areas and still can't locate the air leak, or if the issue persists, it's a good idea to have a professional technician inspect your chainsaw. They have the expertise and tools to diagnose and address more complex air leak problems.
      Remember, addressing air leaks is crucial for the proper functioning and longevity of your chainsaw's engine. We hope this information helps you pinpoint and resolve the issue. If you have any more questions or need further assistance, please feel free to ask.
      Thanks
      Craig

  • @kmkm5465
    @kmkm5465 Před rokem +1

    Hello . Why don't you make a clip about four-stroke lawnmower carburetors?

  • @steveburke3
    @steveburke3 Před 2 lety

    You have a guest star in your video at 8:48

  • @gopigopi7027
    @gopigopi7027 Před 2 lety

    Please video Tamil explain

  • @ashokkumarchourge
    @ashokkumarchourge Před 2 lety

    Hindi me batay

  • @choppergirl
    @choppergirl Před měsícem

    These screws are the worst design ever. I have one on my motorcycle Mikuni carb, on the bottom where you can't get a screwdriver in anywhere. Tweaking it clockwise or counterclockwise really doesn't give you a lot of feedback while it's running if your rich or lean. I just try to get it where it won't stall out when you twist the throttle. The real, real, real problem is the Pilot jet, which has the smallest hole ever in the center and gets clogged all the time on my bike, even with a fuel filter on, and even with a surgically clean carb. Worst... design.. ever.

  • @kjell-richardlvdal373
    @kjell-richardlvdal373 Před 2 lety

    I see Stihl New saw Have automatic carb. Adjustment, it means there is No adjustment you can do on the carb,.

  • @robsdeviceunknown
    @robsdeviceunknown Před 2 lety

    Good God I could barely understand you with those background racing sounds.

    • @TheRepairSpecialist
      @TheRepairSpecialist  Před 2 lety

      Sorry to hear that. At the time of making the vid I thought those sounds would give some extra meaning but I think I must have overdone it somewhat. Thanks for the feedback.

    • @steveburke3
      @steveburke3 Před 2 lety +1

      @@TheRepairSpecialist They sound great to me. I heard you speaking over the sounds clearly and the sound does a good job of highlighting a crucial part of carb tuning, and that is the sound of the engine.

    • @pauladams4833
      @pauladams4833 Před 2 lety

      I think the engine sounds helped with the description and images, keep up the good work