12A Mazda RX7 Stationary Gear options for competition, performance, or street use - KMR Rotary Tech
Vložit
- čas přidán 30. 05. 2023
- www.kylemohanracing.com
talking to long about 12a stationary gears, Bearing type, gear options and more. Rotary parts knowledge. - Auta a dopravní prostředky
nice video man good job
Thanks ......Mike .....1991 rx-7 fcs5....bought it in July 1991
do you use Premix
Nice to see that ,
i try to remplace the bearing by a needle cage and reducce the diameter of the exenctric shaft(it reduce a lot the friction,2k kms done with it,my fuel consumption on the rx8 was 7.5L without him pulling on the faceand got a better acceleration in terms of revs, by far my lowest consumption with this engine 231cv 6ports)but have an issue with the exentric shaft witch one become eat by the needel(not to hardener or may be not to much oils flow:the pressure where nearly 0.6bar at idle and 3b arrond 3k rev)
it 's why i'm very interest about the hight flow oil pump if you do a review about it 👍
you can see here what i have done(it may be more clear) : czcams.com/video/8t3nuL4uzV0/video.html&ab_channel=JulienH