How do I be the grinder lol for real though where do i start how do i get in i went to welding school and have nccer card but would like to know how to get foot in door thx
william jamieson what do you own stock in this company or were you one of the guys that never got good at welding. This one joint took like 30 man hours to complete lol !
@@thegt3clickcrash329 it is not about the wasted time doing 1 weld. It is quality! Imagine all the pipeline installed underwater having 1 pore on that weld, how much it would cost to repair being underwater?
Oh, that is just to annoy the viewers. The noise (a.k.a. "music" - heh, heh...) is usually chosen by that guy who worked at drop hammer heavy forge and never wore any hearing protection. I gues he's done that to prove you don't loose hearing - and he's right, he still can the difference between this kind of "music" and no music. See? (Or "hear, hear", as they say...)
I take it that this is used for offshore type applications ? I noticed the wall thickness is pretty heavy. I've done years and years of mainland pipeline work and its typically thinner than std wall thickness. Before they sandblasted it , I noticed an arrow drawn on the pipe which is typical for x-ray. Do they do both x-ray and a.u.t ? or do they a.u.t. guys use arrows as a reference zero also ? I think its pretty cool how they can turn pipelining into an assembly line .
@@luisfelipemunozfrausto7542 what about the interior area of pipe? isnt it supposed te be coated and protected from corrosion too? sometimes the ppeline is used for wet gaz transportation wich can cause corrosion too!
Subsea7 na base de Ubu dentro da Samarco representou um dia vou trabalhar nela só trabalhei com segurança dentro do seven oceans um dia serei funcionário dela
It is a tough and durable protective coating for the subsea pipeline. The pipe lengths are already coated with it (white coating). The IMPP is applied to the joint area after welding and NDT. The half shell is fixed to the bottom half of the joint as a temporary protection from the rollers as the fresh joint moves along the line. It is removed after curing.
Alex Finn To piss the welder off that has to repair that weld 20 - 30 years down the road. Don't need that poly. on it if it's going under water. A swrenk sleeve would be just fine.
KIRA KIRA LAHAN ATAU TANAH WILAYAH PRODUKSI DAN WILAYAH PENCAMPURAN BAHAN JADI BENTUK HASIK PIPE SERTA GUDANG PENYIMPANAN DAN GUDANG PEMASARAN BERAPA JARAKNYA MASUNG MASING YA ????? APA 1 KOTA ATAU 1 KABUPATWN YA ?????!!!
Eddy currents, welding, end up with a crappy weld. Arc blow if you're in the mood for googling and a longer explanation but long story short it borks up welds.
ASYIK DWH DUHA PIPE DI NEGARA DILI TIMOR TIMUR ATAU TIMOR ATAU NEGARA KUPANG JADI DEH KIRIM YA ???? ALAT KERJANYA SEGALA MACAMNYA DAN CARA MEMBUAT PIPE DARU DASAR MUKAU DARU MEMBENTUJ BAHAN DI CAMPUR BAJAN SATU DGN ALINNYA SAMPAI BAHAN SIAP DI OLAH JADI MASAK DAN HASILNUA DI PRODUKSI ATAU DIBAKAR DGN STEIM LISTEIK WHATNYA GEDE BESAR SAKALI!!!!!!! HASIL AKHIR SETELAH DI PRODUKSI DI BUAT UKIR DABNY DSBNYS DSBNYA SIAP DI JUAL KE NEGARA LAIN DAN SIAP DI PASARKAN JADI DEH!!!!!!
Hi guys, I am with a company that is specialized in pipeline services for offshore and onshore. We do everything from Welding to NDT to coating and we have branches all over the globe. I hope we can be partners someday.
Please compare other methods of "pipe fitting" with FIT RITE Precision Pipe Fitting Systems! Just google FIT RITE FAST! Faster, easier, cheaper and more accurate! One operator in lieu of a "Fitter" and "Welder" saves man-hours! Make more profit!
actually, the polyurethane coating is an insulation for deep well rigs, if they used non insulated pipe, it would cause crazy temperature differences from inside and outside of the pipe, do some research, and that's not paint on the pipe, that's a glue.
That’s what you call A grade engineering- outstanding quality 👌👌👌👌👌
professional workers and technology, loved it.
That was amazing. No one can find mistake
Waohhhh Amazing Pipaline Pabrication Videos chanel Mr..! 👍👍👍🙏
good works everyone hard work Full skilled works exlent
I’ve worked with emas side by side with crc evans during the Sierra pipeline project in the north water. It’s really fun working with them..
We Made Those Oil Well Tool Joints In Detroit In 1978. The Job Paid $91 per 100. Ran 400 Parts In 8 Hours. Made Great Money!!!!!!
very very useful. Thanks for uploading!
How many manhours required for that 1 weld!
we used to do all of this with hands(manually) in iran .from small pips up to 56" pipe .
Will the orbital welding gives 100 percent on x-ray test
I Like To Your Chanel Mr..! Thanks You 👍🙏
I can't stop doing this job.
How do I be the grinder lol for real though where do i start how do i get in i went to welding school and have nccer card but would like to know how to get foot in door thx
progress is a virtue/ top class operation goodbye the old days bring on the new era cant wait for the next contract
william jamieson what do you own stock in this company or were you one of the guys that never got good at welding. This one joint took like 30 man hours to complete lol !
@@thegt3clickcrash329 it is not about the wasted time doing 1 weld. It is quality!
Imagine all the pipeline installed underwater having 1 pore on that weld, how much it would cost to repair being underwater?
Excellent welding equipment giving perfect welds, but what part of the job does the music do ?
Oh, that is just to annoy the viewers. The noise (a.k.a. "music" - heh, heh...) is usually chosen by that guy who worked at drop hammer heavy forge and never wore any hearing protection. I gues he's done that to prove you don't loose hearing - and he's right, he still can the difference between this kind of "music" and no music.
See? (Or "hear, hear", as they say...)
Great content bro like it too much
Can anyone give more details for the PreHeat method? is that water or air cooled?
Induction coils are used to preheat the pipe, though sometimes they use propane torches
no respirators while grinding that rust or coating off the pipe?
crephotos nahhhh
Why clamp a saddle to a finished, quenched and trimmed joint pp coat on the weld joint?🤔🤔
It not hardend fullt jet så it can be squished on the next few rolls
I take it that this is used for offshore type applications ?
I noticed the wall thickness is pretty heavy. I've done years and years of mainland pipeline work and its
typically thinner than std wall thickness.
Before they sandblasted it , I noticed an arrow drawn on the pipe which is typical for x-ray.
Do they do both x-ray and a.u.t ? or do they a.u.t. guys use arrows as a reference zero also ?
I think its pretty cool how they can turn pipelining into an assembly line .
Moe Fugger 8
Yes it's probably for reel-lay vessel Seven Ocean
Thanks for sharing this video...
Enjoy piping work by letest matchines
تمام الله ينور
Quality inspection...❤👍.indonesian must see.
Very very useful tips
Why the Polypropylene sleeve?
hi Ad.
Please give me the name of the background music. Thank
Hufcvjgxiufc8 to be and of time to
can someone explain what is the used of IMPP in this process? I still could not get it
To protect the weld from corrotion made by water salinity
@@luisfelipemunozfrausto7542 what about the interior area of pipe? isnt it supposed te be coated and protected from corrosion too? sometimes the ppeline is used for wet gaz transportation wich can cause corrosion too!
Круто. Каждый стык стоит штук 5 зелёных.
Откуда такая информация ? А в РФ сколько стит каждый стык ?
Good job men!!!
Esto,si esta interesante.
Excellent job
good job!
Subsea7 na base de Ubu dentro da Samarco representou um dia vou trabalhar nela só trabalhei com segurança dentro do seven oceans um dia serei funcionário dela
Where I come from, if you grind on the pipe any where out of that bevel it's a cut out.
it was a wire brush
why
yes you right.its true.but only if the rod touch the out side the bevel.
this is the type of video you watch at three am when you cant sleep
Good job
This is so cool,
g
👍👍
مرحبا انا صاحب الاختراع الأحدث والاسراع في العالم في مجال بناء خطوط
What is the polyurethane coating for?
It is a tough and durable protective coating for the subsea pipeline. The pipe lengths are already coated with it (white coating). The IMPP is applied to the joint area after welding and NDT. The half shell is fixed to the bottom half of the joint as a temporary protection from the rollers as the fresh joint moves along the line. It is removed after curing.
Alex Finn To piss the welder off that has to repair that weld 20 - 30 years down the road. Don't need that poly. on it if it's going under water. A swrenk sleeve would be just fine.
to protect the painted pipe from impacts, rocks etc on the seabed.
Increíble
tebrikler
good technologyst.
What is the contrct8ng companies name
I am studing fabrication and errection engg in mumbai india can u guys let me know where will I get good and nice jobs
Warlords Camillus yep. There's a few nice hotels down the street looking for a fluffer boy.
Badass..
Amazing..
very nice
Great
Very good 👍👍👍
Class job
Badass
i worked for this company spool base
Wow
Nice
😍👍
whats welding machine name
I want a job there being a welder ....all wearing air movers prbly supplied by the company. And all automated ...sign me up
Squatting Squirrel pointes le tuiou apres pointage et le soudage cordon jusq'un la fin merci
Goood mesin ❤️❤️❤️❤️❤️
KIRA KIRA LAHAN ATAU TANAH WILAYAH PRODUKSI DAN WILAYAH PENCAMPURAN BAHAN JADI BENTUK HASIK PIPE SERTA GUDANG PENYIMPANAN DAN GUDANG PEMASARAN BERAPA JARAKNYA MASUNG MASING YA ????? APA 1 KOTA ATAU 1 KABUPATWN YA ?????!!!
thats a lot of fucking work for one joint. Question, how do they transports this pipes after welding them??
Do they do this process in the field?
this process is ON a pipe laying vessel at Sea.
Why the pipe must be non-magnetic?
Eddy currents, welding, end up with a crappy weld. Arc blow if you're in the mood for googling and a longer explanation but long story short it borks up welds.
Thanks :-)
ASYIK DWH DUHA PIPE DI NEGARA DILI TIMOR TIMUR ATAU TIMOR ATAU NEGARA KUPANG JADI DEH KIRIM YA ???? ALAT KERJANYA SEGALA MACAMNYA DAN CARA MEMBUAT PIPE DARU DASAR MUKAU DARU MEMBENTUJ BAHAN DI CAMPUR BAJAN SATU DGN ALINNYA SAMPAI BAHAN SIAP DI OLAH JADI MASAK DAN HASILNUA DI PRODUKSI ATAU DIBAKAR DGN STEIM LISTEIK WHATNYA GEDE BESAR SAKALI!!!!!!! HASIL AKHIR SETELAH DI PRODUKSI DI BUAT UKIR DABNY DSBNYS DSBNYA SIAP DI JUAL KE NEGARA LAIN DAN SIAP DI PASARKAN JADI DEH!!!!!!
what is a spoolbase maeans???
To load reellay vessels ..
the pipe joints are made one after another and the whole pipe is wrapped around a large diameter "spool" before being placed on a pipe-lay ship.
Nice super
Les formules de cintrage des tubes différents diamètre
👍
long long time for 1 weld,,,
Goud
soudage pour du gaz ou bien pour du petrole
ONGC POST LIST
There is no extrusion blow molding machine in this video.
Arc or mig welding?
Looks like Pulse Mig...Fronius CMT
ahaaa old vigra on the dirty nellys
Hi guys, I am with a company that is specialized in pipeline services for offshore and onshore. We do everything from Welding to NDT to coating and we have branches all over the globe. I hope we can be partners someday.
Some people leave really weird comments on a CZcams video ..... You will not be establishing buisness relationships in the comments section
to make accurate measure just refer IPC99 mobile app from google Play store
That type of welding isn't effective for every field weld . Don't worry welders your job is secure. For now!!
Please compare other methods of "pipe fitting" with FIT RITE Precision Pipe Fitting Systems! Just google FIT RITE FAST! Faster, easier, cheaper and more accurate! One operator in lieu of a "Fitter" and "Welder" saves man-hours! Make more profit!
U.S machines are the best :3
H X well yeah it has
iam a pipe welder waahhooo
Hay qua
That has got to be the most monotonous job ever.
ProduceBOY939 radeo metalograf bon chonce
I'm gtaw smaw welder I want job there
hey
Still a lot of manual steps in the process
If this job is done by indias, pakistan, bangladesh..i dont know maybe it wont last..these will make ka boom!...
I work as a welding machine and pipe maker
jop mig arc welder
Y’all hiring?
joh
halo daer i m all waldingg wark argan tig mig alcetrice 7 yaer old warkinng i need wark
stop praying so much and get a real job
.
the whole polyurethane over the weld joint is a waste of time, and the fact they laid it over paint and not clean metal is pointless
actually, the polyurethane coating is an insulation for deep well rigs, if they used non insulated pipe, it would cause crazy temperature differences from inside and outside of the pipe, do some research, and that's not paint on the pipe, that's a glue.
Didn't you see that CCAB?
,
Hello sir
waste time for 1joint...too bad
Thethaiwelder
Ллллш
sexy
thats not welding haha