Traxxas X-Maxx 8s 1100KV (Review)
Vložit
- čas přidán 24. 07. 2024
- Full video on my X-Maxx
Last bash with the x-maxx - • Traxxas X-Maxx 1100KV ...
Gens Ace Red 4s 6000mAh - www.genstattu.com/ga-r-130c-6...
Traxxas X-Maxx - webstore.eliminator-rc.com/tr...
Proline Trenchers - webstore.eliminator-rc.com/pr...
Remember to use code "PERRIN" to get $15.00 off at webstore.eliminator-rc.com/ when you spend $100 or more. (some restrictions do apply) - Zábava
To answer the posters question, I purchased an Xmaxx within the last few months and it still had the tiny rear hub bearings that the original came out with. I blew one up on the 3rd run. Dozens of outings since installing the RPM rears and no issues yet. Great video by the way. Thanks for the good info!
Your X-Maxx is so cool looking i might build one similar someday when i get another xmaxx love your videos too can't wait to see more.
ordered mine yesterday
be here next week thanks for the info
Awesome video on your Xmaxx Jason! I think you have covered everything perfectly 👌 I agree the Traxxas upgraded servo is more than enough and due to the funky size that's a good thing. I have just started running an 1100kv in mine and I am loving it 🤩 I ran a stock 6s 1600kv motor for a long time but it's starting to really stress my batteries and probably my Max6. The 1100kv has really brought it back to life. I gotta upgrade my tires soon, I keep regluing stock tires every other run 🤣
I've had a to add shims, aluminum diff covers and Traxxas aluminum cases to my X-Maxx so I would stop chewing through ring gears and output drives after going with the Max 5, 1100KV motor and 25/35 gearing. Now I'm having an issue with bending the driveshafts. I also had to install wfo drive cup sleeves so those are would stop splitting. I'm waiting for the WFO titanium driveshafts. Hopefully those will not break or bend on me. I use duratrax lockup x 24mm belted tires. I don't like using heavier or bigger tires than those. Good review.
My factory ESC went out and was going to go with castle but couldn't get the motor mount from WFO. All sold out! Grr I put a hoddywing max6 and it works great with factory motor. I have proline badlands and I can flip it at will. Love my xmaxx!
I had same wheel nuts. Now I installed the proline racing 1/5 24mm axle conversion kit and I don’t need to worry about that anymore
I did look at those. I wished they came in red. :) But I haven't had any issues with the wheel nuts so I have stuck with them.
@@JasonPerrinRCVlogs ya I strip the anodize off of all aluminum pieces that don’t fit color wise. The proline conversion kit just looks like raw metal now
Great informative video👍🏾I agree with you with the 1100kv. I have the sensored system from Castle. Gobbs of power💪🏾🔥
Super nice build. Looks are yeah man!
Awesome build!
I purchased a xmaxx a few weeks ago, and I can confirm that the rear hub carriers and bearings are the same. I replaced then with RPMs.
would be great if i can get the links on what you purchased to upgrade motor and esc along with motor mount, love your set up!!
Loved the Video Jason. I just bought a New XMAXX and this helps alot. Can you please tell how you feel with the extra suspension add on? The 4 pistons with shock fluid. Does it help and is it worth it?
Nice build! Good Advice!
Just picked up a new xmaxx and the bearings on the hubs were larger than my other one I purchased new as well
Very informative, I subscribed 👍
You mentioned a castle combo that would be an alternative to the hobby wing. What were you referring to? I couldn’t quite understand what you said. Thanks
Fantastic job on this Overview I have had many Xmaxxs and u can’t have a collection with a Xmaxx period what a truck I’d like to ask your opinion on the belt drive and if u think it’s a good upgrade
Love the set screw on the drive cups,great design. Where did you get the wheel nuts? Also,a great design.
I'm rewatching this since last week i got my 2nd X-Maxx 8s a used red one in a trade for my Slash 2wd, my 4-Tec 2.0 Ford GT and my Sledge. and I plan to build mine similar to yours except i will have blue aluminum parts on mine and maybe a Max 5 G2\56118SD 1,100KV Combo someday. I hope to see more videos of your X-Maxx someday if you still have it.
Hi i found a almost new xmaxx with the 2085x servo and Max 6 and som other rpm things for 850$ is that a good deal ?
Can please list all upgrades?
I have bent shock shafts.
I just got a new X maxx …it arrived at my house yesterday, I can confirm that the truck has updated Hubs front and back with the larger bearings on the inside…20x32x7 which are the same as the rpm bearings…bad thing is I already ordered my rpm hubs for the rear… It’s about time they updated their stock hubs and bearings they’ve been crap for a long time. I’m not sure when they started putting these new hubs on their trucks but it definitely has a new model number for the parts.
@@brokenbirf my truck is that new solar flare color….ya traxxas should send them out for free a on all trucks purchased in 2022….I’d contact them and complain…maybe they will
I just bought an xmaxx 8s and they changed the hun bearings to the larger ones!
Do u feel the xmaxx has more punch with the firma 160? Just picked up an xmaxx and given, I use the 6s arrma’s a lot off the ramp, the xmaxx rotates like a turtle. Can barely pull a backflip in under 4 secs. May just be used to the arrmas that can rotate in half a second, but the fun factor is diminished as level ramp jumps get boring rather quick.
It would be cool if you occasionally went through your whole collection and gave your current thoughts on each. Like keep as is, modify, or sell.
Hey was just wondering what weight diff oil are you using in the front and rear ? Thanks
29p/50s mod1 , what temps and top speed you are getting with this set up ? Thanks
Is there a way to fit the Raminator wheels on the Xmaxx?
What 29 tooth pinion are u running on the motor? I can seem to find a 29tooth to fit the 8mm shaft?
Traxxas does have new oversized front and rear carriers for the xmaxx now. Parts #7737x and #7752x
Do you know how they compare to the rpm ones? Doing some research on upgrades/fixes before actually buying the thing 🙈
Awesome video man. We have to get the beasts out sometime to bash 😉
What batteries do you recommend running in an xmaxx?
What’s the best gearing for the hobby wing 1100 kv mod 1
Bought an Xmaxx roller. Kinda on a budget but want a max6 combo. Which KV motor will be an improvement over stock but not require a motor mount change. Is the motor mount expensive?
I have max 6 and stock motor. Performance is still good. I actually use the higher kv stock xmaxx motor from the 6s truck. Can be found cheap. My buddy has new 8s all stock and mine beats his even with heavy tires. It’s not quite the power of 1100kv obviously but if you are on a budget this may be a good thing for you since the aforementioned set-up is powerful but not as abusive on parts. You could always add the 1100kv on down the road.
I bought an Xmaxx yesterday, ESC was dead so I had to exchange it. So far I’m having a blast with it. Every xmaxx video I’ve watched recommends the RPM rear carriers, planning to get a set to keep on hand.
great information,awesome rc
Thanks 👍
Could leave a link for the esc please?
Your Truck Looks Like It's Been Detailed Cleaned 👍
Shelf queen? I see no rash on it. I work mine like a red headed stepchild.
Did the v2 come out yet?
❤ thank you
Great breakdown bro and information... Do u have link for wheel nuts?
just search "24mm Xmaxx" on ebay and they will be the first thing that will show up.
@@JasonPerrinRCVlogs thanks bro... I was gonna go 1100kv but I went with the good ol 800kv again... Keep enjoying and keep being great bro... Your content is top shelf 💯 👌🏾
Will your gear cover fit with the wfo mount. And 1100kv motor
No, but I think WFO makes a cover now.
Great video thanks
Great vid! How do you manage to keep your Xmaxx so clean?
Clean it after every run. Plus it helps that I run a lot on grass. 😉
Will you please do a video of what you use to clean it and how you do it?
I’m just blown away honestly because every time I run mine I can only think that it would take hours to get it as clean as you do yours and yours is even shiny! Sorry for the long reply kinda new to the Xmaxx game.
You should try some duratrax x belted tires half the weight of those pro lines.
I have. Tried them all and I like them a lot. I've got a set of the Six Packs right now.
Yup and way cheaper. Duratrax is my go to tire for my X-Maxx and Armani 8s rigs.
@@joseCalderon1976 same bro👍 I weighed the duratrax hatchet x for my xmaxx and the prolines it was within an ounce of being half the weight that's a big deal to me I gotta the 800kv sensored 2028 and with super heavy tires I can twist off a drive shaft pretty easily.
@@theirishaxe9405 I also prefer the smaller 5687 1100kv motor the Xmaxx with 25/35 gearing. Way more responsive in the air and when doing the backflips. And it weighs less. 👍
Why is that 1100kv not a green can?
cool vid! big like!
Jason: I asked traxxas to send me free cars. Traxxas: do you watch your own videos. HAHAHA
I tried. :)
Still running mod 1 gears? Was thinking I had to switch to mod 1.5 with 1100kv?
Zero issues with the mod 1. Only reason I haven’t changed.
@@JasonPerrinRCVlogs guess I can order a 1100kv motor now and not worry about changing gears👍
@@joshc6080 most 1100kv and lower motors have a 8mm shaft. So just make sure you get a 8mm bore pinion.
@@JasonPerrinRCVlogs thanks for the info
yes i bent stock shock arm
Next project dropping the current Max6 1650 kv over to the arrma mojave and installing a max5 1100kv in the xmaxx
Nice✅
Have a newer sun burst xmaxx I will say it's the v2 i guess tax has no power off have to unplug battery to turn off bearings are the large size front and rear stock in fact the stock bearings fit inside the rpm parts I did that so I have fresh spare bearings if needed has cooling fans on esc and 2 fans on motor factory
My 2085x never broke either
The Castle 800kv and 1100kv are the same, they both have 45000 RPM.
I have the XLX2 and 800kv castle and it's a ripper. Easy 100 + mph X-MAXX, OH YA! KEEP ON BASHING, OR SPEEDING! FROM BARRIE ONTARIO CANADA
No. :). They both have a Max RPM of 45000. The 8s the 1100kv would have 32560 RPMs versus the 800kv that would have 23680 RPMs. So you can see how the 1100kv would be faster.
@@JasonPerrinRCVlogs disagree:), it's all about the ⚙⚙gearing, which would be the same for both 1100kv or 800kv. They are both the same can size. The torque is pretty much equal. I've never been able to drive mine at full power, it's just too much power, and that's the same thing for the 1100kv. I don't believe one is better than the other if geared right, and ESC'Z and batteries have a significant impact on speed and energy consumption. Either way, they both move the rc,and that's the objective.
What Gearing you think is good for a 800 KV trenchers tires max five ESC
@@justintillett4159 I use 25/35 gearing for outstanding speed..
@@petekobraoutdoors7324 I’m new to Rc iso I don’t really know trying to learn but I have the 800 KV with the max 5ESC I run the trenchers Motor gets a little bit hot I don’t know if that’s normal or what any suggestions
I think I’m gonna step down my 800kv to 1100kv
I discovered a few months ago that RPM now makes oversized bearing carriers for the front of the xmaxx, I would recommend them as somebody who has trashed front wheel bearings before 😏
Why do we all need a "fanboy" label? I have lots of brands with lots of upgrades. I see your hobao work mat,also a great brand. It's just a fun hobby that's hard to understand until you drive a hobby grade rc.
Because Traxxas has had a fanboy reputation for almost 20 years. People over hype them they make them sound the best when in reality they are mediocre. I’ve got a mountain of Traxxas trucks and sure they’re a good time but they aren’t special. Even my x maxx isn’t even close to my favorite truck. Just nice to have a 1/5 scale. The best thing Traxxas has going is their electronics.
Sweet ass rig Im wanting one so bad but $1000 just don't seem worth it...
It's worth it ;)
It's on the fence but I have more than I can keep up with
I’m running the mmx8s esc just waiting on the wfo motor mount. I have 30t and a 46t spur gear think tht would be a good set up ??
I think you would be good. I'm running 29t/50T and it works with zero heat issues.
@@JasonPerrinRCVlogs cool thank you for the help I love your videos super cool videos keep up the cool videos
Its nonsense to use extra Battery to power a fan... Just use an dc-dc stęp down converter or an ubec 😅 kt will be 30 time lighter
I have a stock x max for years works fine love and still going strong without any childish upgrades (human nature) 🥴🥴🥴🥴
You don't run it hard!
IN A VIDEO YOU HAD 1.5 MOD GEARS THAT U HAD GOT FROM SOME COMPANY IN GERMANY AND U SAID THE MAN THAT HAD THE AMERICAN SUPPLYER WAS IN THE DESCRPTION BELOW AND HIS CONTACT ON FACEBOOK .CAN U TELL ME HIS NAME I DONT HAVE FACEBOOK SO I HAVE NOW WAY TO CONTACT HIM BUT I KNOW 1 PERSON THAT HAS FACE BOOK SO SHE COULD CONTACT HIM FOR (SO COULD U EMAIL ME HIS NAME PLEASE .)IM SORRY I CANT PAY TO SUBSCRIBE TO U CHANNEL ON UTUBE ..SO PLEASE TELL ME WHEN U CAN THANKX
How do you feel about belt drive?
www.pnwrcmadness.com/product-page/pnwrc-traxxas-xmaxx-belt-drive-system?fbclid=IwZXh0bgNhZW0CMTEAAR0rgEXAp1mNUhPgMWMF2-MYGccyWPaS0DrL1eeRzdV5HJw2A1V_I7-G7xc_aem_D7FHvMkCprlzz-TdQuyaVA