Parker TG Hydraulic Motor Outer Bearing Replacement for a Dingo TX420
Vložit
- čas přidán 27. 08. 2024
- I replaced the outer bearing on the hydraulic motor that went bad. This video summaries the steps of putting together the motor that was disassembled in order to remove the broken bearing and replace it with a new one.
My Parker TG had a FC66362
bearing which is the exact same bearing
used in vehicles for axles and things. It cross
references to National Bearings part 5707
(same for similar brands) and it's under $25.
Parker part #
THRUST, #11
BEARING
068024
INNER
BEARING
071031
THRUST, #15
BEARING
069017
OUTER
BEARING
068027
DIRT & WATER
SEAL
478035
Hydraulic Motor Assembly No. 106-7654
Description Qty.
1 100-6131 SEAL KIT 1
Motor Stamped with E998
Parker Motor PN: TG053UB190AA
Just what I needed. A look inside before I pull one of these apart. I have end bearing play in a TG series motor.
The unit I have is a Ross torqmotor, now Parker. The service manual can be downloaded via a quick search for Parker TQ service manual.
All the part numbers are in there along with the layout and options.
There is a full description of what grease goes where.
Identification of part numbers is a bit tricky but bearings are common to all motors in a series. The numbers are Parker part numbers only. There is no reference to sizes etc should you try to source an alternative part.
Good video. Appreciate the effort and the price links too. Though I'm in the UK.
Good luck to other fixers.
The biggest step in the video is missing which is removing the dang outer bearing! I couldn't do anything but break it apart and stick a long screw driver from the inner side and carefully pound it out.
And the bearing itself is stupidly expensive for a bearing. My Parker TG had a FC66362 bearing which is the exact same bearing used in vehicles for axles and things. It cross references to National Bearings part 5707 (same for similar brands) and it's under $25.
I wish someone would show how to remove the old bearing.
Slide hammer
What was the part numbers for the seal kit and bearing ??
Parker part #
THRUST, #11
BEARING
068024
INNER
BEARING
071031
THRUST, #15
BEARING
069017
OUTER
BEARING
068027
DIRT & WATER
SEAL
478035
What was the measurement of that bearing?
do you have part number for bearing? ive been searching everywhere cant seem to find one.
try calling these companies. i placed orders with both of them and need to find my item list of parts i bought. i will reply with more details if i find that info
www.motionindustries.com/products/Bearings
www.wilson-company.com/
Parker Medium Duty Motor - Torqmoto TG Series
ph.parker.com/us/17601/en/hydraulic-motor-with-exceptional-strength-and-durabilty-for-up-to-13000-lb-in-torque-torqmotor-tg-series
Parker 24013A E998 motor, 106-7654, TG0530UB190AALY, TG0530UB190AA
Parker TG 068027 outer bearing, F-66263, $29.95
Parker SHAFT Part #: ME019011 Price/UOM: $280.32
Inner bearing, koyo B-3412 Drawn Cup Needle Roller Bearing - Open Ends with Full Complement, 2-1/8 in Bore, 2-1/2 in OD, 3/4 in Width
order info from motion industries
Qty Vendor Item Number Unit Price Total
1.0 INA 06226868 29.95 29.95
Description : F-66263.RH
www.wilson-company.com/product/068027/068027
068027
Parker FRONT BEARIN
Part #: 068027 Manufacturer: Parker
Price/UOM: $35.49
You're a life saver thank you!