Amazon Amazing 6.5L Pneumatic / Manual Oil Extractor│EB0103│EWKtool

EWK 6.5L Pneumatic / Manual Oil Extractor Pump for Automobile Fluids Vacuum Evacuation
0:00 Operation Instructions
1:05 Before Extraction
2:13 After Extraction
Part no. / SKU: EB0103
Check it out on EWKTOOL
bit.ly/3uRjInl
Check it out on EWK Amazon
amzn.to/3ArLeHP
【 Humanized Design 】 With EWK oil extractor pump, the engine oil or transmission fluid can be easily and cleanly extracted directly through the dipstick tube, and the sealing cap is attached to prevent the liquid from spillage during transport.
【 Dual-purpose 】Equipped with pneumatic and manual mode depend on the environment and your own equipment. The pneumatic mode turns the pump into a high-speed oil changer, while the manual mode requires no other equipment to use.
【 Time-Saver 】Equipped with 2 sizes of extra-long pipes with different diameters, which can suck deep into the bottom of the storage tank. The transparent hose allows visual inspection of fluid extraction. Fast suction speed of 1.8L/min. The oil change pump extracts engine oil from a 4-cylinder car within a few minutes in pneumatic mode.
【 Wide Application 】No limited to places, change oil anytime & anywhere! Smaller footprint and lighter weight for easy storage. Perfectly extracts most fluid types: engine oil, transmission fluid, gear oil, coolant, and power steering fluid. Applicable for car, motorcycle, lawn mower, boat, jet ski and etc. *Note: Gasoline and fluids with high volatility, high corrosion, high alkalinity and high temperature are FORBIDDEN to be used on the extractor.
【 Authenticity Guarantee 】 Please identify EWK manual/pneumatic oil extractor pump that has obtained patent authentication. (US Patent Number: 8360741) We provides you premium quality tools with 12 months warranty. If there is any problem or concern with our products, please contact us for assistance.
#EWKTOOL
#ExcellentWorkingExperience
#OilExtractor
#ChangeOil
#FluidExtractor
#PneumaticOilPump

[@EWKTOOL]

Correction:
1:06 ~ 1:14
The product Applicable Temperature Range: 35°F - 140°F.

[@npolite1]

What is the PSI for using the pneumatic side?

[@Reekostory]

it worked perfectly just did it today took about 8 minutes of pumping to get it to fill all the way up

[@MarkNOTW]

That’s what she said

[@41rob]

How do you change the extraction tube

[@Dnasty1]

Can this also fill oil?

[@garovetsas4125]

Just ordered Mine hopefully it’s serviceable, anyone know what parts fail or get clogged and prevent vacuum or suction?? O ring/ Pneumatic valve

[@EWKTOOL]

Thank you for purchasing our product!
Please feel free to contact us through our official website if you have any inquiries about the product.
www.ewktool.com/

[@Treaxvour]

Hose doesn't suck, air just comes out the handle. This makes no sense.

[@tooagle]

"remove stuck and clean the tube after use" This is the only thing I can find to tell me what that stupid wire is for. I mean, what sense does this make? It's not in the manual at all. WTF?

[@franklinholbrook924]

This is a pain in the ass......the bottle concave when I'm running the PSI and I can see the oil moving but the container wants to collasps.....so I variable the release valve.......wasting faaaawkin time here...not happy

[@joshucontreras1223]

This is one of the worst expeirence I've had doing my oil change using this product

[@ao6364]

As a potential buyer, can you elaborate, please?

[@Reekostory]

@A O same well I already bought it and will test it out if it fails I will let you know and have to do the oil change the normal route by going under

[@Reekostory]

@A O mine worked perfectly extracted all the oil guess the other guy fucked up or his car wasn't compatible

[@Xostrich12X]

@@Reekostory hahaha thanks

[@44nt]

@@Reekostory8 month update? how’s it holding up