Quick video of the EWK fluid extractor. The product speaks for itself. Saves me time and backache when doing routine maintenance. You can purchase this on amazon for roughly $77 before tax.
Great video, what needs to be added is that this method is not suitable for all vehicles. I have a 2015 VW GTI & this is actually how they intended the oil to be serviced, with that being said, I’d definitely make sure that whatever vehicle you own can be done this way. I know that some makes have restrictive oil pans or have different compartments inside. Again, great video on how to use, they don’t come with instructions for some reason.
thanks for this vid, it really helped me with my wife's subaru outback. Even after watching this I still could only get about 2 qts of oil our using the extractor. Had to get the rest from the drain plug but it was still easier to empty half the oil that way.
Great unit. I just used mine for the first time and worked perfectly without the compressor. I'm sure it would be much faster with the compressor but it wasnt that slow either. I wish they would offer longer extraction tube extensions. The dipstick tube on my Mercedes ML is close to the firewall, I had to lift the extractor on a crate
@@vinanoir Worked really well actually! The hand pump was not the best. I couldn't get enough suction to happen. I had to use my air compressor to get it going. Keep in mind, some engine's do not have a clear opening to get the tube down to the bottom. My wife's Audi Q5 had a whole section that blocked it from even getting in an inch. So double check!
Can you show the connector you use with your air compressor, using it to connect to the oil extractor? I tried many different connectors and it doesn't fit. Thanks.
Bro not to get of topic but the second ford ranger video you did with the crager soft 8 what where the tire specs 😭😭😭 I got the same exact wheels you had but didn't get a chance to see what size tires you had going lolol can you help me out here
Great video, what needs to be added is that this method is not suitable for all vehicles.
I have a 2015 VW GTI & this is actually how they intended the oil to be serviced, with that being said, I’d definitely make sure that whatever vehicle you own can be done this way. I know that some makes have restrictive oil pans or have different compartments inside.
Again, great video on how to use, they don’t come with instructions for some reason.
Thanks for this video. The unit didn't come with any instructions, so this was very helpful. Cheers!
thanks for this vid, it really helped me with my wife's subaru outback. Even after watching this I still could only get about 2 qts of oil our using the extractor. Had to get the rest from the drain plug but it was still easier to empty half the oil that way.
Great unit. I just used mine for the first time and worked perfectly without the compressor. I'm sure it would be much faster with the compressor but it wasnt that slow either. I wish they would offer longer extraction tube extensions. The dipstick tube on my Mercedes ML is close to the firewall, I had to lift the extractor on a crate
Just ordered this! So excited haha
hey lenin. you wrote this one year ago--how'd it work out?
@@vinanoir Worked really well actually! The hand pump was not the best. I couldn't get enough suction to happen. I had to use my air compressor to get it going.
Keep in mind, some engine's do not have a clear opening to get the tube down to the bottom. My wife's Audi Q5 had a whole section that blocked it from even getting in an inch. So double check!
Airplane oil change made easy👍 Good video-Thanks.
Nice...How much psi via the compressor? Great video.
Awesome video. Do you leave the compressor on the entire time or just until the vacuum is created?
You should do a video on how to use
The wire on a clutch bleed/flush
There are no videos on CZcams.
Works great if your oil filter is located up top and not below lol I’m getting this for quick diy brake bleeds
It has been four years, is it still a good product?
Thank you very much
How is it holding up? I need to buy one for my truck and seeing a lot of them fail and break because some of those parts are all plastic
Anonymous they are actually well made. Haven’t had any problems.
Great video. When using the compressor, what PSI do you set the compressor at?
SuperJam2001 I ran mine at 100 PSI.
thanks for the video man. looking forward to using it.
Awesome, thanks!
Nice Eric Johnson soundtrack!
Can you show the connector you use with your air compressor, using it to connect to the oil extractor? I tried many different connectors and it doesn't fit. Thanks.
awesome vid...thanks!
Bro not to get of topic but the second ford ranger video you did with the crager soft 8 what where the tire specs 😭😭😭 I got the same exact wheels you had but didn't get a chance to see what size tires you had going lolol can you help me out here
Damn this one seems Bette than the one I order. With the air compressor it’s fast AF. I’m pumping like 1 hour just to remove 6.9 quarts
hhahahha
What about the oil filter
How is it holding up after 3 years?
What size compressor?
Be careful using this product as ours got stuck into where the dipstick should go!
How much psi should I set for the tool line from the compressor?
I put mines at 90 psi with a 10 gallon compressor
anything above 40PSi would work.
how many liters of oil did you get? this doesnt work with a wrx
You have to warm up the car so you can pump the liquid out easily