OEMTOOLS Oil Extractor Evacuator Test - Acura NSX & R33 GT-R
Vložit
- čas přidán 22. 07. 2024
- Where to buy: amzn.to/3PEvSed
In this video we look at OEMTOOLS Model #24389 5.6 Quarts Manual Fluid Extractor, Fluid Extractor Pump. We tried to make it work on our R33 GT-R but had no luck, we then tried it on our 1991 Acura NSX, and we had success. It makes an odd sound but besides that it seems to work. The full oil change video will come out later on when the NSX needs an oil change.
#nissan #honda #acura #nissanskylinegtr #r33 #nsx #acuransx #acuransxoilchange - Auta a dopravní prostředky
Keep pump on the ground it will suck ( vacuum ) fast.
Thanks for the advice.
Yes I was yelling that at the screen the whole time lol
@@MarkNOTW LoL
I love mine , it's much cleaner, and makes oils changes so convenient, especially when the oil filter is accessible through the top,
just make sure to run the car a few minutes before.
Also you gotta place the thing on the ground, and also give it like ten fast pumps, it will works way faster.
Mine came with a variety of hose sizes (6 or 7?), and even an attachment to bleed the brakes, and a built-in accessory holder to keep everything together.
My pump also came with a monster syringe thing, its kinda redundant I suppose, but it's there if I ever need it.
My pump also made a racket while pumping, it freaked out the dogs, so I put a dap of dielectric grease on the rod, and its quiet now.
I wasn't sure if this thing removed all the oil out of the pan, so I removed the oil plug on each of my vehicles the first time, and not one drop came out on any of the vehicles. It's money well spent
Nice! Glad you like yours too. I use it now for all my oil changes but my GT-R. For some reason it does not work on it.
tienes que quitar el tapon por donde hechas el aceite para que entre el aire y asi lo aspirara mejor el aceite .gracias un saludo desde españa.
Thank you!!! I appreciate the tip.
Hi guys. Not much input here but fun to watch. Thanks for the video🏎
Glad you enjoyed it The noise was so funny.
So you pump and end with the handle down after the stroke to accelerate suction? Did I get this right? Please respond .
@@jamesathendune9026 yes and no, pump till you get suction. That might be with the handle up or down. You will see the fluid flowing and then stop. If it slows down do a pump or so to get the suction going again.
Pump it rapid for 6-8 times and it will remove all the oil
Thanks fir the tip. ✌🏽
Anyone know where to get a thin tube replacement for this extractor #24397
I ended up getting a few on Amazon. I then used tape to use it with my setup.
@@DriversTherapy thks..jc
Any update on if this works with the R33?
It does not unfortunately. I tried multiple times.
Bro turn this into 18+ content 😀😀
lol it is all in your mind Hahaha
You have to pump more you don’t know how that works
How do you know how the pump works?