Man! I wished we had you here in Canada.You are an awesome mechanic. Thanks by the way: I just fixed my 7610 with shifting problems: the RH reverser (combined with pwrquad on one stick) was really hard to get in fwd and reverse. Turned out that the linkage rod on outside of the cab was rusted in the other linkage as you mentioned in the video:"John Deere 7810 shutlle stuck in forward". Thanks for you video's!
Take a breath Warren, things get done when they get done... getting them done RIGHT is far more important than anything else, everything I have seen you do is a perfect balance of done right, and not over done, you seem to replace what they need, and save them money where it’s safe to do so..
A nice clean overhaul there Warren. Your typical well done. I had a guy in grade school, actually a couple of them. They would always start a fight. I think I was the biggest and they had to take me down. Years went by and I would take it. One day the two of us were alone and I knew what was coming. I walked right up to him and gave him one good fist to the nose. Never ever had a problem with him again.
Really enjoying you working on the green paint tractors I’ve got a couple of those tractors that have been very reliable!! Thanks from down in East Texas
We are impressed with the ease which you are able to take on those engine rebuilds. Regardless of age of engine or make of engine. The service parts supply chain needs to work and apparently does work for rebuilds of engines where new production engines were only in days long gone.
A true fighter gets tougher with every knock-down, a pansy never gets over the punch, just weak in the knees, when they think one's coming, you can bet they will be coming! (good-upload) Sir
Whoever it is would have gotten their ass busted a damn site sooner than 4 years. 4 minutes would have been my limit. David didn’t turn the other cheek to Goliath he ended the problem. 👍 🇺🇸🦅🌏⚓️🇺🇸. Great content 👍
He also took 4 extra stones incase Goliath's other Brothers chose to argue the point about the out come. Tradition has it that they were cousins because Jesse's mother was Ruth and their mother was Orphan who was Ruth's sister. Jewish history has it that when she went to her father's house again sheended up marrying into Nephilim royal Philistines family.
Your videos are the best on the net. You do a great job and you are very knowledgeable. I enjoy watching the beginning to the end. Thanks for the schooling.
Fancy torque wrench there Warren lad ! i still have my Britool over centre type that i bought in 1975, (0 -50 ft lbs and 50 - 250 ft lbs) looked after them and i bought a test gauge for them to check the accuracy, keeping them clean and lubricated correctly keeps the wear down
Hi Warren , thanks for the video, nice close up video, and explanation of running the valve settings, as for the 4yrs of abuse, it depends how short a fuse you got, and if it's a work situation whether your willing to get fired for fighting, nobody should have to take that crap, I'm only a small guy ,but if they came at me and I'd something heavy in my hand , then the outcome wouldn't be too pleasant , It's a question of what your willing to do to stop it, preferably whith no witnesses, and if the guys bigger than you you'll have to go in hard, and risk a beating, but at least you will show your not an easy target, and usually they'll move on , I don't condone violance, but sometimes it's all they understand, just my 2 cent's worth from an old guy whose been round the block a few times, stay safe, best wishe's to you and your's, Stuart.uk.
That engine sounds sweet as. Nice job mate. When the criminal calls the victim a liar, and the victim's allegations of what the criminal knows he did as baseless - and the criminal plays himself as the victim of baseless allegations from a "sore loser viewpoint" - he has quadrupled down on dishonesty, corruption, hypocrisy, and illegitimacy. The chair will remain vacant until an honest president is elected. Unless the military intervene that will be a long time coming. David
@Warren, are you posting more videos on another platform? I miss your great content and regular videos. If you are just busy, I understand. But let us know if you are posting content somewhere else.
Good video! I’m also a big fan of Milwaukee tools as I wrench daily and make use of them. One I’d recommend is the 1/2”dr stubby impact wrench with the torque drive control is perfect for running down head bolts.
always nice to see a successful job complete ! This fellows daughter will not complain of to much smoke underside. Only thing better than the sweet sound of a rebuild start up is the sound of the cash hitting the bank ...to pay the bills at that end !
The lighting and video quality here looks like you are on a movie set. Push or pull, your choice. What matters is where your hand goes if something breaks loose.
Great job Warren! I’m curious to know what you think of these guys on the CZcams channels that spend years preaching about cleaning engine parts for a rebuild and then you never actually see them put anything back together? 🤔😂 unlike you 👍🏻
My farther always told me when I was a boy if anyone picks on you no matter how big or how many fight back and hit the biggest first as hard as you can, you may get a good hiding but they will respect you for fighting back. I would have punched his nose first time and every time he picked on me. I am now 69 and still believe my farther was right. Also my two sons “ who are big lads” were given the same speech that I got as a boy. Thanks for the video Warren I really enjoy watching a craftsman at work. Tom 🇬🇧🇬🇧
My oldest knocked one on his ass two years ago. Cost me a doctor bill for a couple stitches but he hasn't bothered my son or his little brother anymore.
Warren I love watching your videos and the comments you make, it’s good to know there are people out there who still give a damm. Can you tell me what name you go under on Rumble please. I want to catch up with your stuff there as well. Keep going mate don’t letter the bleeders grind you down !!
Wow, another great video thank you. To quote the man over on AvE, there are shitty broken people out there and the way to not be shitty is to be truthful that is you sir, that is why your so busy and why you have so many quality viewers. Waiting for your next video, take care your web sight is a breath of fresh air in the middle of a crazy time.
So many people that deserve that punch he would get tired of punching. With #1 on TDC compression set both valves. Then rotate crank (120* for 6 cyl and 90* for 8 cyl) and follow firing order to set the rest. Was how I was taught back in the 60's. Just another way to do something. Thanks for sharing.
Smart move replacing the oil pump. Anytime we rebuild anything it is a gamble. My brother put new rods in a BT 154 international. The tractor did not have 10 hours on the rebuild and the #1 rod broke. It was setting at a wood pile idling connected to a buzz saw.
Good afternon wareen 🤝. Great video, i'm in my garage whit my brother and my dad, we are repairing a case 🚜 and i'm working on my 2 ATVs. As alwais, a pleser waching your videos, we allvais lock forwat to your videos. Thanks for shering your knowleg, experereants, whit as, we realy apresieitet 🤝. Keep wrenching 🔧🔩⚙️ and have a great Day. 🤠.
Tell him to stand up to him and be ready to fight. On one guy I stood up to him and he sucker punched me. I broke his nose. The second time I stood up to my own brother and was ready for the punch but he backed down and we haven't talked in 15 years. Good enough for me!
just make sure no witnesses so you can skip any punishment phase....i am 70 plus and this has worked for me many times...sure you don't wanna use a 2x4? lol
Pull verses push on the torque wrench handle.. I would love to have someone explain the difference from the perspective of the torque wrench. You're applying the same amount of force to the handle to get to the proper amount of torque. My best guess is that you have less chance of hurting yourself if you're pulling and the socket slips off or breaks.
I was bullied for most of my school career and after I did my military I decided no-one would bully me again. Those who tried were either told their fortune or if my employer bullied me I found another job. most bullies are simply cowards and when challenged they back down. a bully normally thinks because he is big he can do what he wants, a swift kick to the nuts normally stops that thinking. some time ago I said I would love to be there just to help you clean up. I would do it for free, anyway I am stuck in Africa ! That motor sounds great.
Happy new year sir,still working so hard,so many should take a leaf out of your book.GBY,and the family,still great content and I've got you on other channel,love to hear your honesty on the videos,it appears these days you can't say a bloody word of fear of poss prison,yes that bad in uk.well onwards and upwards👍👨🔧
Your videos are the most calming thing about my day now. Hey why did you adjust a few of the valves before you checked for valve overlap? Also what would the protocol be if you knocked that firewall and a bunch of grit fell in that head? Would there be a way to deal with it without tearing everything apart? I mean you can't blow grit off an oily surface I guess.
I heard you say something about oil and one of the brands you mentioned is my favorite brand rotella 15/40 I run it in everything I own gas or diesel I’ve never had a problem once I even had it fix a oil leak no joke had a three wheeler the head leaked oil out the side on gasket and I started running rotella 15/40 and it stopped I still ride it all the time runs great
Great work ethic. I've done a fair share of wrenching myself and I have never seen anyone as efficient as you.
Can't get over how incredibly clear your videos are. Whatever camera you use is a winner. Thanks for the consistently great videos my friend.
Man! I wished we had you here in Canada.You are an awesome mechanic. Thanks by the way: I just fixed my 7610 with shifting problems: the RH reverser (combined with pwrquad on one stick) was really hard to get in fwd and reverse. Turned out that the linkage rod on outside of the cab was rusted in the other linkage as you mentioned in the video:"John Deere 7810 shutlle stuck in forward". Thanks for you video's!
As a field Mechanic, You sir are awesome... Been there done that. Retired now, Miss the friends and satisfaction of a well done job.
Take a breath Warren, things get done when they get done... getting them done RIGHT is far more important than anything else, everything I have seen you do is a perfect balance of done right, and not over done, you seem to replace what they need, and save them money where it’s safe to do so..
Yep dont have a mental crack up
You give true meaning to the saying, "Getting down and dirty." I'm impressed. 👨🔧
It’s good to know British John Dere are the same trouble as yours good to watch someone else work
A nice clean overhaul there Warren. Your typical well done.
I had a guy in grade school, actually a couple of them. They would always start a fight. I think I was the biggest and they had to take me down. Years went by and I would take it. One day the two of us were alone and I knew what was coming. I walked right up to him and gave him one good fist to the nose. Never ever had a problem with him again.
I'm so glad you showed us the initial startup Warren! Boy it sounds sweet! Thank you so much!
Bullied the first time fight back immediately. No more bullying.
Warren 4 years of harassment is tooo long should have been dealt with first month treat a 4 year old like a 4 year old or they will never learn 👍
Really enjoying you working on the green paint tractors I’ve got a couple of those tractors that have been very reliable!! Thanks from down in East Texas
We are impressed with the ease which you are able to take on those engine rebuilds. Regardless of age of engine or make of engine. The service parts supply chain needs to work and apparently does work for rebuilds of engines where new production engines were only in days long gone.
Thanks for posting, Warren. I learn something with every video you do.
A true fighter gets tougher with every knock-down, a pansy never gets over the punch, just weak in the knees, when they think one's coming, you can bet they will be coming! (good-upload) Sir
Whoever it is would have gotten their ass busted a damn site sooner than 4 years. 4 minutes would have been my limit. David didn’t turn the other cheek to Goliath he ended the problem. 👍
🇺🇸🦅🌏⚓️🇺🇸. Great content 👍
He also took 4 extra stones incase Goliath's other Brothers chose to argue the point about the out come. Tradition has it that they were cousins because Jesse's mother was Ruth and their mother was Orphan who was Ruth's sister. Jewish history has it that when she went to her father's house again sheended up marrying into Nephilim royal Philistines family.
Excellent Job Warren, Give it to him right between the eyes
Laying here with my 4 month old kid she falling asleep to this mechanical gospel 🙌 🙏
You are an awesome mechanic. They broke the mold after they made you Warren.
I always enjoy listening to how crisp and smooth a freshly rebuilt engine sounds.
Your videos are the best on the net. You do a great job and you are very knowledgeable. I enjoy watching the beginning to the end. Thanks for the schooling.
Video quality was excellent, good job.
It's hard work yes, but there's nothing like that feeling when she starts up and purrs like a kitten.
Fancy torque wrench there Warren lad !
i still have my Britool over centre type that i bought in 1975, (0 -50 ft lbs and 50 - 250 ft lbs) looked after them and i bought a test gauge for them to check the accuracy, keeping them clean and lubricated correctly keeps the wear down
Hi Warren , thanks for the video, nice close up video, and explanation of running the valve settings, as for the 4yrs of abuse, it depends how short a fuse you got, and if it's a work situation whether your willing to get fired for fighting, nobody should have to take that crap, I'm only a small guy ,but if they came at me and I'd something heavy in my hand , then the outcome wouldn't be too pleasant , It's a question of what your willing to do to stop it, preferably whith no witnesses, and if the guys bigger than you you'll have to go in hard, and risk a beating, but at least you will show your not an easy target, and usually they'll move on , I don't condone violance, but sometimes it's all they understand, just my 2 cent's worth from an old guy whose been round the block a few times, stay safe, best wishe's to you and your's, Stuart.uk.
Thing sounds pretty bossy now! And not a trace of crankcase smoke, nice job, thanks for the trip.
I love you man !
You're the best
Live long, play hard.
Four years, four minutes in my book. Great vid by the way.
Ya know, that Yellow accent in the engine now looks pretty sweet LOL. Another job done well.
Thanks for the videos warren. I learn a lot from you explaining what , and why your doing what your doing.🤙🏽
That engine sounds sweet as. Nice job mate.
When the criminal calls the victim a liar, and the victim's allegations of what the criminal knows he did as baseless - and the criminal plays himself as the victim of baseless allegations from a "sore loser viewpoint" - he has quadrupled down on dishonesty, corruption, hypocrisy, and illegitimacy. The chair will remain vacant until an honest president is elected. Unless the military intervene that will be a long time coming.
David
Warren , another top shelf engine rebuild. 🤔😉💯👍
so happy to see you on Rumble... now I can dump CZcams anytime. You're the only reason I was staying with it.
Nice work Bud,have a great weekend Warren.
HI GUYS FROM AUSTRALIA 👍👍 HOPE EVERYBODY HAS A BETTER NEW YEAR THIS TIME 😊😊😊 GREAT WORK WARREN👍👍👍
Amen to that brother and you also and God bless you and your family
thanks for making the video, i really enjoy it. hope to get more great videos from you
Man you are a wealth of knowledge,
No,thank you warren for your hard work.
Ever thought of a head torch , comfortable hands free and in your case mouth free ,
Great video , have a good break
I got to give you credit warren as many projects as if you've got going at one time I don't see how you remember where everything goes
Good Video always nice to see you get the job done 👍engine sounds good 👍
Warren, the rumble account is not working.... doesn't seem to have any new videos, always enjoy watching
you do good work, just remember, we are all human, and thus not perfect. We just try to do the best we can!
@Warren, are you posting more videos on another platform? I miss your great content and regular videos. If you are just busy, I understand. But let us know if you are posting content somewhere else.
It is a tough job you do Warren but you do it well. It has to be rewarding for you.
She sounds smooth, good job and thanks for the video.
Good video! I’m also a big fan of Milwaukee tools as I wrench daily and make use of them. One I’d recommend is the 1/2”dr stubby impact wrench with the torque drive control is perfect for running down head bolts.
Great video Warren, I’m a yellow iron guy, love the head 🤠
You do great work warren
always nice to see a successful job complete ! This fellows daughter will not complain of to much smoke underside. Only thing better than the sweet sound of a rebuild start up is the sound of the cash hitting the bank ...to pay the bills at that end !
The lighting and video quality here looks like you are on a movie set. Push or pull, your choice. What matters is where your hand goes if something breaks loose.
Good job. She does sound good. Looking forward to the next video
Great job Warren you work hard for sure you could use a helper hope you can get a break rest those bones
Thanks for another great video. I appreciate someone with the “CAN DO” attitude, “CAN’T NEVER COULD”.
your a real mechanic warren not just a parts replacer
Looks like you had your ears lowered 🤣. Great job on the JD motor rebuild
Great job Warren! I’m curious to know what you think of these guys on the CZcams channels that spend years preaching about cleaning engine parts for a rebuild and then you never actually see them put anything back together? 🤔😂 unlike you 👍🏻
My farther always told me when I was a boy if anyone picks on you no matter how big or how many fight back and hit the biggest first as hard as you can, you may get a good hiding but they will respect you for fighting back. I would have punched his nose first time and every time he picked on me. I am now 69 and still believe my farther was right. Also my two sons “ who are big lads” were given the same speech that I got as a boy. Thanks for the video Warren I really enjoy watching a craftsman at work. Tom 🇬🇧🇬🇧
My Dad said the same!!!!!!!
That is a darn nice $300 Snap-on flashlight Warren! Looks like you’ve got a ton of use from it.
Warren take your Sunday to yourself. Put your feet up and enjoy your day with the family and of course the dogs. Stay safe.
My oldest knocked one on his ass two years ago. Cost me a doctor bill for a couple stitches but he hasn't bothered my son or his little brother anymore.
Great content something different every time .🇮🇪
Awesome series Warren. She sure sounds good.
And as always light in the mouth 🤣🤣
Great video again Mr. Warren!
Greets from Jur 🇳🇱
But u are a great mechanic so dedicated to your work cheers mate
Get some well deserved rest Warren, have a nice weekend.
Warren I love watching your videos and the comments you make, it’s good to know there are people out there who still give a damm. Can you tell me what name you go under on Rumble please. I want to catch up with your stuff there as well. Keep going mate don’t letter the bleeders grind you down !!
Good job Warren
Great work Warren..really enjoy your videos..thanks
Nice job 👍👍you do put some work in and very good at the work that you Do . You like it to be right . 👍👍👍
Great video shipmate thanks for sharing...
Wow, another great video thank you. To quote the man over on AvE, there are shitty broken people out there and the way to not be shitty is to be truthful that is you sir, that is why your so busy and why you have so many quality viewers. Waiting for your next video, take care your web sight is a breath of fresh air in the middle of a crazy time.
So many people that deserve that punch he would get tired of punching.
With #1 on TDC compression set both valves. Then rotate crank (120* for 6 cyl and 90* for 8 cyl) and follow firing order to set the rest. Was how I was taught back in the 60's. Just another way to do something.
Thanks for sharing.
Sounds awesome....great job !
Smart move replacing the oil pump. Anytime we rebuild anything it is a gamble. My brother put new rods in a BT 154 international. The tractor did not have 10 hours on the rebuild and the #1 rod broke. It was setting at a wood pile idling connected to a buzz saw.
Looking forward to the new Rumble video
Good job Warren !
That's hard work at chest height Warren.
Great stuff.
Fine work as always brother..
Damn good engine rebuild!
Good afternon wareen 🤝. Great video, i'm in my garage whit my brother and my dad, we are repairing a case 🚜 and i'm working on my 2 ATVs. As alwais, a pleser waching your videos, we allvais lock forwat to your videos. Thanks for shering your knowleg, experereants, whit as, we realy apresieitet 🤝. Keep wrenching 🔧🔩⚙️ and have a great Day. 🤠.
Tell him to stand up to him and be ready to fight. On one guy I stood up to him and he sucker punched me. I broke his nose. The second time I stood up to my own brother and was ready for the punch but he backed down and we haven't talked in 15 years. Good enough for me!
just make sure no witnesses so you can skip any punishment phase....i am 70 plus and this has worked for me many times...sure you don't wanna use a 2x4? lol
Good job on the engine. 😁
Warren sounds sweet 👌👍
Damn plastic parts! Don’t guess we’ll see any more 70+ year old tractors all complete. With original body parts
Pull verses push on the torque wrench handle.. I would love to have someone explain the difference from the perspective of the torque wrench. You're applying the same amount of force to the handle to get to the proper amount of torque. My best guess is that you have less chance of hurting yourself if you're pulling and the socket slips off or breaks.
beautiful sounds like a deere
I was bullied for most of my school career and after I did my military I decided no-one would bully me again. Those who tried were either told their fortune or if my employer bullied me I found another job. most bullies are simply cowards and when challenged they back down. a bully normally thinks because he is big he can do what he wants, a swift kick to the nuts normally stops that thinking. some time ago I said I would love to be there just to help you clean up. I would do it for free, anyway I am stuck in Africa ! That motor sounds great.
Hope you double checked battery cables by the exhaust manifold! We about burnt up a 7420 because cable rubbed through against exhaust manifold
Happy new year sir,still working so hard,so many should take a leaf out of your book.GBY,and the family,still great content and I've got you on other channel,love to hear your honesty on the videos,it appears these days you can't say a bloody word of fear of poss prison,yes that bad in uk.well onwards and upwards👍👨🔧
Thank you for the video.
Very well done Warren. Sam
Your videos are the most calming thing about my day now.
Hey why did you adjust a few of the valves before you checked for valve overlap?
Also what would the protocol be if you knocked that firewall and a bunch of grit fell in that head? Would there be a way to deal with it without tearing everything apart? I mean you can't blow grit off an oily surface I guess.
I like the Cat yellow on the head,with the John Deere green ..
Lol. Construction Deere yellow, maybe someone who has a loader or something with a 6.8l has a green head on a yellow block... haha
I said the same thing , who's the wise ass that painted that yellow 😂
Or it could be a Caterpillar engine maybe
The same engine and head is used in deere construction equipment, which is yellow. It's not cat yellow. It's not a cat engine.
Nice work.
Good job, keep the repairs coming 👍
I hope he well 👍🔧🔩⚙️
Plenty of job security especially in the winter time..
I heard you say something about oil and one of the brands you mentioned is my favorite brand rotella 15/40 I run it in everything I own gas or diesel I’ve never had a problem once I even had it fix a oil leak no joke had a three wheeler the head leaked oil out the side on gasket and I started running rotella 15/40 and it stopped I still ride it all the time runs great
Good for another 15 thousand hours or so.., how did the dealer make out with the big one that was overheating, and cracking exhaust manifolds..