I watched a ton of videos about installing raptor lights on a 5th generation 4Runner. This was the first one that had an engine bay fuse box like my vehicle (a 2015 4Runner Limited), and where the power wire was run the way you did. Today, I installed a 4 smoked amber Raptor Light kit in my upper grill. I followed your lead by unscrewing the bolt in the engine bay fuse box. It took about 15 minutes of prying with a flat tip screwdriver and holding my mouth right, but I finally got the plastic piece to slide up allowing me to run my power wire up through the gap. The best part is the fuse box cover snaps back on keeping everything water tight. I also ran a relay and an OEM style "Raptor Lights" dash switch. It was a bit of a chore but well worth it as the lights look great! Thanks for posting this fuse box wiring technique, I never would have thought to try that!
I got my raptor lights on amazon for half the price for what they are selling them for and they’ve been awesome with no issues. I have a 2018 and I couldn’t take off that plastic piece after you unscrew the nut to run the power wire under it. I prolly wasn’t doing it right but I did exactly as he did with the flathead and tried for like 30 minutes. The plastic piece wouldn’t come off so I just had to do it the other way with the wire hanging out the side of the fuse box. I just wrapped some tape around the part of the wire that is getting slightly pinched. Still has been working perfect for me though and the fuse box is still secure and I’ve driven in a lot of different conditions so far with this setup.
Thanks for the video. Bought and installed two of the set of three smoked ones on my 2017 4RUNNER Limited. They look great along with my Morimoto XB headlights.
Bernardus Jones do you happen to have a picture of what the smoked one’s look like lit up? Want to get the smoked ones but am worried it won’t be enough output for me! I’m on IG @ catfish_gilley if you can dm me!!!
Great video. Easy install. However, for the 2020 TRD Pro. The fuse box has a different layout and will not completely close. I used a zip tie to keep it latched. Can you source a taller fuse box cover for 2020's?
Hi. The one I bought from your site, has 1 orange fuse labeled 5 and nothing else attached to the harness. I thought it was supposed to be 15 and a 10 attached to the harness? Did I get a new design one?
Another GREAT video! Thanks - could you also use the 30a trailer tail light fuse? would prefer to have the lights only illuminated when parking lights or head lights are on. Thanks again.
I have a 2016 limited, would you recommend the 3 piece or 4 piece? Additionally, since I have day time running lights would you use that same fuse box or the one under the steering wheel inside? Great video. I appreciate your feedback.
Can I just use two of the three lights? Don’t have the pro grille but I think two would look good, always liked the amber driving lights on the Tacos but the DRL’s on the 4R and so week.
I did on my 2017 4RUNNER limited which has a thick plastic grill support running down the center. I left one plug blank on the harness it hasn't given me any problems
I think 4runner is better for families with kids. There is more room. Taco is more of a it's my own weekend getaway with friends truck. But both reliable and fun.
Do these install on a 2018 limited 4runner? I looked under the hood today and I don’t believe the holes that you need to thread the wire through were there.
Hi, I tried install some raptor lights on my 2021 Toyota 4Runner sR5 premium and they didn’t fit the wholes where so big. Do you know where I could buy some that will fit my grill? Thank you 🙏
@@neronfrancis6508 I bought this last year and it's just how this one is set up. it does make things a lot easier, since you don't have to run the wire through the firewall.
I bought the three light kit (tinted, amber) and my "add a fuse" came with a "5" fuse and NOT a "15" fuse as stated in this video. Is this going to be an issue?
I as well received a "5" fuse and not a "15". If you do not mind me asking, did you ever solve this issue? My grill lights do not come on at all. Do I just simply need a "15"?
@@davidg047 I still have mine in the Fog Fr 10A fuse, with the 5A fuse that came with the raptor lights. Maybe the order of the fuse makes a difference in the connector? And make sure you have the polarity of the plug correct. I wouldn't be surprised if they just didn't work, they are very cheaply made..
I accidentally broke that silver bolt that holds the ground for the whole fuse box. 😭 not sure how much its gonna cost but gotta take to the runner to the dealership tomorrow
WHAT YOU SELL ON THE SITE CAME WITH NO ADD A FUSE AND ONLY C-SHAPED CONNECTOR ON THE END OF THE POSITIVE WIRE. I HAVE NO CLUE HOW IM SUPPOSED TO CONNECT THIS. CONTACTED CUSTOMER SERVICE AND THEY WERE NO HELP.
Did you select add a fuse or t tap? If you chose the cheaper option then it was the t tap which is what you receivesd. There are videos on CZcams on how to install t taps.
I watched a ton of videos about installing raptor lights on a 5th generation 4Runner. This was the first one that had an engine bay fuse box like my vehicle (a 2015 4Runner Limited), and where the power wire was run the way you did. Today, I installed a 4 smoked amber Raptor Light kit in my upper grill. I followed your lead by unscrewing the bolt in the engine bay fuse box. It took about 15 minutes of prying with a flat tip screwdriver and holding my mouth right, but I finally got the plastic piece to slide up allowing me to run my power wire up through the gap. The best part is the fuse box cover snaps back on keeping everything water tight. I also ran a relay and an OEM style "Raptor Lights" dash switch. It was a bit of a chore but well worth it as the lights look great! Thanks for posting this fuse box wiring technique, I never would have thought to try that!
Thanks for the review. It was both informative and helpful. I ordered mine right after watching your install.
I just put the 4 light kit in 2014 SR5 4RUNNER. Nice up grade . Thanks for the helpful video.
Just ordered mine, can't wait to install
I got my raptor lights on amazon for half the price for what they are selling them for and they’ve been awesome with no issues. I have a 2018 and I couldn’t take off that plastic piece after you unscrew the nut to run the power wire under it. I prolly wasn’t doing it right but I did exactly as he did with the flathead and tried for like 30 minutes. The plastic piece wouldn’t come off so I just had to do it the other way with the wire hanging out the side of the fuse box. I just wrapped some tape around the part of the wire that is getting slightly pinched. Still has been working perfect for me though and the fuse box is still secure and I’ve driven in a lot of different conditions so far with this setup.
Thanks for the video. Bought and installed two of the set of three smoked ones on my 2017 4RUNNER Limited. They look great along with my Morimoto XB headlights.
Bernardus Jones do you happen to have a picture of what the smoked one’s look like lit up? Want to get the smoked ones but am worried it won’t be enough output for me! I’m on IG @ catfish_gilley if you can dm me!!!
@@brandongilley4847 They are accent running lights. Send me an email at lagong@comcast.net and I'll send pictures of my truck. I don't have Instagram.
That fuse box 😤
Should do a tent vid:)
How do you wire the lights so they they are only on when the lights are on, and not whenever the ignition is on?
what kind of pumper you have on the car, please let me know I've 2019 four runner ..
Did you do a video on the winch install?
What’s the difference between these and the ones on amazon? They look exactly the same as any other website except more expensive
Can I ask why you chose to use that Fuse and not Head Light fuse above it? Thanks great video
I tried on my headlight fuse and it didn't work. The led lights are powered on regardless of whether the headlights are on or off.
Great video. Easy install.
However, for the 2020 TRD Pro. The fuse box has a different layout and will not completely close. I used a zip tie to keep it latched. Can you source a taller fuse box cover for 2020's?
Are you gonna restock on the 3 piece? Would really like to buy some!!
Hi. The one I bought from your site, has 1 orange fuse labeled 5 and nothing else attached to the harness. I thought it was supposed to be 15 and a 10 attached to the harness?
Did I get a new design one?
Another GREAT video! Thanks - could you also use the 30a trailer tail light fuse? would prefer to have the lights only illuminated when parking lights or head lights are on. Thanks again.
Hey Dave. Did you ever get an answer for this?
I have mine tapped off of my low beam fuse so they are only on with my headlights
@@Mtnmanlifts I don't get why mine isn't working... I tried low beam and only one light shut off. Which slot did you use exactly?
I have a 2016 limited, would you recommend the 3 piece or 4 piece? Additionally, since I have day time running lights would you use that same fuse box or the one under the steering wheel inside? Great video. I appreciate your feedback.
hello I have a question about your comment which fuse box worked best for you ?..🤔
I bought the kit and it didnt even ship with the screws. Can somebody tell me what size it is.
What grill guard is that?
The blue fuse what is that for?
Can I just use two of the three lights? Don’t have the pro grille but I think two would look good, always liked the amber driving lights on the Tacos but the DRL’s on the 4R and so week.
I did on my 2017 4RUNNER limited which has a thick plastic grill support running down the center. I left one plug blank on the harness it hasn't given me any problems
Pros and cons on owning a Tacoma vs 4Runner? What do you recommend for someone getting into overlanding?
I think 4runner is better for families with kids. There is more room. Taco is more of a it's my own weekend getaway with friends truck. But both reliable and fun.
Where did you get the black hood scoop wrap on the cement Toyota Tacoma?
Jacob Welch it came that way
Hi, I want to add these to my 2020 Pro. Which fuse outlet do you use? I read that 2020 is different?
I would like to know as well!
@@jessbae96 Buy a fuse box or your car could catch fire
Do these install on a 2018 limited 4runner? I looked under the hood today and I don’t believe the holes that you need to thread the wire through were there.
I don't believe it'll work for the limited
Hello! Which front winch bumper is that one? I am looking for one to fit my 4runner SR5 2019. Thanks!
This one is the Hefty Fabworks
planning to put this on my civic for different styles what you think? this can work?
When I attatch mine to the 10 INJ fuse my car wont start, do you know why that is and is there another place i could put the fuse?
Same. Mine shut off on the highway... then lost traction and cruise control functions.
Hi, I tried install some raptor lights on my 2021 Toyota 4Runner sR5 premium and they didn’t fit the wholes where so big. Do you know where I could buy some that will fit my grill? Thank you 🙏
We sell some at Runnin4Tacos.com
Around 8:12, am I the only one struggling to get that part of the fuse box up? 😅 It feels like no matter what I try, I can't get those pesky clips
Why do you plug the fuze under the hood instead of in the cabin? What is the difference?
Yes, why not inside the cabin?
@@neronfrancis6508 I bought this last year and it's just how this one is set up. it does make things a lot easier, since you don't have to run the wire through the firewall.
2021 SR5 and the fuse box does not close. Any suggestions would be appreciated.
You can give our team a call and they'll advise on what to do. 3039096047 during business hours
Why that fuse? Isn't that fuel injection...
I bought the three light kit (tinted, amber) and my "add a fuse" came with a "5" fuse and NOT a "15" fuse as stated in this video. Is this going to be an issue?
Mine too! I added my spare 20 but now my car cant shift out of park
Same. I installed the 10A that I removed, and the one that came with was a 5A. Using the fog fuse. We'll see what happens...
MINE CAME WITH NO ADD-A-FUSE AT ALL. WTF!!
I as well received a "5" fuse and not a "15". If you do not mind me asking, did you ever solve this issue? My grill lights do not come on at all. Do I just simply need a "15"?
@@davidg047 I still have mine in the Fog Fr 10A fuse, with the 5A fuse that came with the raptor lights. Maybe the order of the fuse makes a difference in the connector? And make sure you have the polarity of the plug correct. I wouldn't be surprised if they just didn't work, they are very cheaply made..
Just followed steps to a T and my 4runner is completely dead now. Won’t turn on at all
Will the gill lights fit 2018 tacma trdsport
No sir
I didn't want to turn the accessory on just to turn on the raptor. I wanted to control the raptor by turn on the DRL is it possible
It isn't possible unfortunately on a 4Runner since it shares the bulb with the high-beams
So no need to disconnect the battery to remove the fuse box bolt ?
Nope.
What front bumper is that?
that's what i want to know
How long do these lights usually last before they die out?
I have a set on my 2019 trd orp. 6 months so far and no issues
LED light bulbs have insane life. Typically over 10 years. I’m sure these are similar
What kind of bumper is in the front ? Thanks
Hefty Fabworks
I accidentally broke that silver bolt that holds the ground for the whole fuse box. 😭 not sure how much its gonna cost but gotta take to the runner to the dealership tomorrow
So what was the damage bro?
Only $500 😬
I ordered one and came with a 5A fuse, is that gonna be an issue?
No issue
@@Runnin4Tacos thank you, I have 2019 4runner trd pro, can I also use the fuse box in the cabin? If so, which plug I should use it
Please make these for the 2019 rav4
Possibly will
Fuse box no longer water tight... 😬
10:00 Fuse
Anyone have these and they just randomly turn on for a few minutes and then turn off?
I would change the fuse location
WHAT YOU SELL ON THE SITE CAME WITH NO ADD A FUSE AND ONLY C-SHAPED CONNECTOR ON THE END OF THE POSITIVE WIRE. I HAVE NO CLUE HOW IM SUPPOSED TO CONNECT THIS. CONTACTED CUSTOMER SERVICE AND THEY WERE NO HELP.
Did you select add a fuse or t tap? If you chose the cheaper option then it was the t tap which is what you receivesd. There are videos on CZcams on how to install t taps.
You can buy this on eBay for $39.99
No lol
I used INJ slot... my fucking vehicle lost power going down the highway. I don't know why, maybe a loose connection??
Taco is double the price of anywhere else, selling same shit with exact word for word description. 39-49 anywhere else.