How To Install A Suspension Lift Kit In A D40 Navara
Vložit
- čas přidán 24. 06. 2024
- My step-by-step process to install a 2-inch suspension lift kit In A D40 Navara time stamps below.
Thank you Like and Subscribe for more automotive content.
0:00 What tools you will need to install the kit and what items are in the kit.
02:39 The issues I had with purchasing the lift kit.
05:56 Super pro bushing kit assembly.
13:27 Installing the rear leaf springs.
22:04 Installing the front struts.
26:56 The issue I had installing the front struts and how to overcome it.
33:42 The results of the lift kit being installed. - Auta a dopravní prostředky
I feel your pain brother!!
Thanks for the share!
“Cheers from Dallas TX!”
Awesome video thanks heaps for the info
An come tax time I’ll be thinking about lifting my D40
Great vid mate and reinforces that when I get my D40 lifted I'm paying someone else to do it 😂🤙
Hahah I do not blame you
Okay, mate. We have some issues here. For reference, I run a business almost exclusively installing lift kits and 4WD accessories. I can assure you that at 28.04, it is absolutely the assembler's fault. I've fitted heaps of pre-assembled lift shocks that fit perfectly the first time. To further add to the issue, I suspect your strut top hat bolt was installed incorrectly as well-specifically, not tight enough. I believe this for two reasons. Firstly, you can see that there is essentially no thread coming out of the top of the nut; there should always be at least a small amount of thread (I've built hundreds). Secondly, at 27.38, you can hear the dust boot hit the bottom strut top washer, creating an audible "clink" sound. The sound test is something I perform on every strut I build. If everything is correctly assembled, I should be able to tap it all over the strut and never make it produce that "clink" sound. Think about it; every single bump you go over will make that strut rattle. In conclusion, mate, it is the assembler's fault, and I hope they covered the cost of you getting them installed. Cheers, mate
Yea they did thanks for your information very informative the struts were assembled by a young lad who looked like he just woke up so I o my had to pay for the wheel alignment didn't get charged for the front strut install.
What’s the Bilstein part number on those extended shocks ?
Front Bilstein B6 4x4 Shock Absorbers
is the bilstein Suspension good for nissan pathfinder 2011?
What are your Falken tyres like .anygood.
Brilliant won't go any other brand good in sand rocks and Rd not loud on the highway and they wear very well.