Pathfinder Lift Kit -
Vložit
- čas přidán 10. 12. 2018
- SHEDLIFE EPISODE !
We got the parts so we gave it a crack, we are not mechanics guys so give us a break if its not perfect ;)
GRAB A STICKER AT TJJACK.com.au !!!
If you lift a pathfinder more then 2 inches in the rear be prepared for wheel alignment issues, this is only a 2 inch lift.
Music Shout Out !
The Heisman - BonBon
Support & Share these artist ! ^^^^^^
IF YOU ARE AN ARTIST WITH AMAZING MUSIC GET IN CONTACT, I WOULD LOVE TO FEATURE YOUR MUSIC :D ~!!!
Instagram
@MR_TJ_JACK
@mac_preston
Subscribe to
/ sunnycoasttj
for more
Stay tuned got the next vid coming for the new Navara - 3 inch Staino going on :D
Soul coughing at 1:15 made me smile. One of my favorite bands
Yes looks absolutely mint mate! Glad ol mate got his Navara back 👌🏼 I’ll keep a look out for you guys while driving around the coast🤙🏻🤙🏻
You see us 🤙🤙🤙
The facts that tout dont have to deal with rust is freaking amazing. Just did a 2.5inch lift on mine it was the worst pain in the ass that ive ever had lol. Nice work and Nice pathy!
Happy Birthday Mr TJ 🤙
yessss boiiiii, New TJ Jack vid!
The pathfinder is looking mint 👌 and that shed is goals, mac needs to step it up in the shed department
haha i know right how good is it
!
well looking back at old footage and this comment didnt age well 😂😂 sickest shed on the block now
Good to see you guys having a crack. LOVE the shed!!!
Why not hey ! 😎
Nice one TJ. Looking forward to seeing what else you have planned
Got some fun trips planned 😎
Looks sick TJ 🤙
Weren’t expecting you to make it that big! Looks mad
naaaa not even that big yet haha
Very nice! Looks JACKED with those standard rims.
I know right, needs some new tyres
Awesome set up
We want to see more offroads with mac. like old gooood times
Yeeeeeea da boiis, the pathy is starting to take shape....
Low key happy that Mac got a new nav but we need a proper introduction. 🤙🤙
Haha yep next vid 🤘
Love y Shed Life vids. You blokes have a blast!
thanks Ryan!
What wheel and tyre combo you planning on running. Keep up the fantastic vids!
Dude so sick!! This weapon would give the nav a run for its money. Super stoked you finally got a truck. And just in time for summer no less. Take her up the beach soon aye. Another awesome video legend. Keep it up🤙🏽🤙🏽
yeww thanks legend , yes up the beach very soon :D
Looks mint. Keen to see it with some new wheels and tyres.
same!
nice vid! might use some of these steps to replace my bottom strut bushes on the pathy. They have definitely seen better days :)
Sick as 🔥🔥
Love watching y'all work on the pathy, got a modded r51 myself
nice ! thanks Remi
Do have any links for suspension components? I cant find a thing for the r51.
shane jablonski nah this guy is a jackass for not putting parts list. Also for ignoring the comments that ask him for the list.
faaaaaark how sick is that shed
Yew yew sick vid bro. Mac is back! 😂😎 take the sway bars out man it’ll go way better haha
haha tempting i suppose
Made it look easy fellas. Coldie at the end of it ya can't go wrong.
SPOT ON HAHA
Looking class man really sweet
Love it! yeeeww
great job :-)
Hey mate, great video! Did you get your pathy mod plated and if so was it hard to do?
Sick!
Looks good tj! Need to get those cookie cutter wheels off though haha 👌🏼. Also I sold my np300 to buy another one so macs not the only crazy one haha 😂
I know ! new wheels soon hopefully haha
What a beast. How did you get around the reverse gear issue?
Looks awesome tj and mint as that max has the Nav again 👌🏻
haha i know ! go the NP300!
TJ Jack haha saw his old one the other day in Forster
Mint ! ..... now for bigger tyres TJ !
I know ! 😎🤙🤙
Pathy is looking mint
thanks mate :D
Need part list!!!
Cutting the swaybar out is much better than getting new swaybar links ;)
Mackerel sure knows his stuff!
Hopefully the coppers leave you alone, heard they’re cracking down on 4wd’s up your way 😬
Mac of All trades hey haha
Hi there so yes I did a 2.5 spacer lift and yes I need a rear alignment you think I will need new camber bolts or is fine with the factory ones to go to do the alignment🙏 by the way your truck looks awesome
Sick
Please tell me you are putting bigger tyres on too.
Could you share all items of the lift kit with item numbers, please?
seriously, pls. this is a must do to the finder
i need to this aswell....share the parts pls
Why's it so hard to list the parts you used for this lift? How else can I give you a like and subscribe? Watching you install parts I can identify is kind of useless.
Still nothing :/
nice) Now we wait your rides) What wheels you will set up?
Hey man it’s Justin’s freinds how ya going
Top notch content mate
thanks legend :D
Yay noice the names Seb is it true ya gonna matey give Justin an older drone
Отличное видео. 👍
Great mod. What brand are the UCAs?
Faaark shes big Now! Thats sick man
Now you need to re-gear the differentials. I feel the R51 Pathys are the unsung rides of the off-road world. They do surprisingly well. I love mine.
yeah so far so good i love it
Is that a costly job ? How much am l looking at to do that ??
Awesome vids man..keep it up.So whats next? Wheels and bars?
thanks mate, Wheels hopefully
Like to see it with new tires on it
Awesome vids
Thanks mate ! stay tuned wont be long ;)
hell yea mate awesome vid how long till the next one?
Not long haha
How much did it cost to do? Where can you order the parts from thanks have a sweet looking ride
;) take it off sweet jumps
Yeah ill book it into nitro circus haha
Looks sick haha just need bigger wheels, what size you thinking of going?
What ever fits !
Sorry if i missed it, but what brand are those front coilovers? Looks mint. I want my d40 that big haha
um springs say ridemax but i got them from MonstrCustoms , they are the 3-5 inch option
So what are the different places you pieced together to do the lift? Or is it a full kit?
Just needs a set of tyres and she’s ready for DI and glassy 🤘🏻
I know ! Will be rad
Until she’s bogged down but then again that’s just a good laugh for all 😂
Hey mate did you have any trouble with the adjustable ball joints facing that way hitting the strut tower at all ??? Mines almost identical and within a week iv torn the runber boots for the ball joints :( If so did you trim the strut tower or ?
Cheers mate 🤙🏼
Yeah they were trimmed a lot
@@TJANDMAC job done !! Strut towers trimmed and painted 👌🏼all fits cheers mate
Great videos, mate, love it!
So you got 6" lift in total, right?
And I didn't quite get, why Mac swapped his navara?
Cheers from Ukraine!)
Yep and he didnt swap he had a newer one now thats manual instead of auto ✌
I just got an 09 Pathfinder and I've been wanting to bump it up 2 inches. 4 looks like a bit much for my taste, but 2 would be perfect.. recommendations for where to start? Parts/kits to use? I'm not a gear head so any advice is welcome!
msg @Kemmal_a , he is on instagram, does custom kits it is who i got my stuff from :)
Wow that thing is huge now.
not bad, needs some new tread for sure
TJ Jack I’m keen to see it once it’s all done, it’s going to look insane.
All it needs is a set of muddies and 3 inch exhaust It’ll be a weapon
stay tuned ! haha
Nice. Just needs tyres now.
Definitely!
Nice 1 sic...
do you have a part list for this by any chance ?
I thought cambers get screwed up goin above 2" on the Pathy/D40..how were the angles after the alignment?
It only has 2 inch suspension 2 inch body lift so still able to get wheel alignment good mate, however there is a lower control arm kit for the rear if you want more lift apparently
🤤 I wanna do a 3” lift on my Pathy but don’t even know where to start. Like what do you say going into a body shop? Do you order through the shop? Do you buy it on your own and bring it to the shop? How much did you spend on parts and labor for all this? Damn this lift is sick!
J Kwic having same issue with my d40 I definitely want 4 inch but I don’t know what to ask for with the extra cab
Could you share the links for the suspension lift all around? thank you 🤙🏻
Can I get some dets on the suspension. You say they're adjustable? I didn't catch what brand they were and how they're adjustable. I'm looking at these mods for my Pathy.
Hi Matt, they were Ridemax coilovers in the front , 2-4 inch adjustable
How’d you get alignment in the rear after 2” suspension lift?
what brand/manufacturer of control arms and sway bar links did you use?
I’m looking at buying a Diesel to lift and play with for some fun 🤔 can anyone give me an idea of how many kms I should stay away from? I’m more family with Toyota’s. just love how tough they look kitted up
My boyfriend is wanting to know where you got the lift kit for your Pathfinder
Where did you buy all your stuff from??
I know I’m late but did you lift the pathy with a 2 inch sus and 2 inch body or was it a 4 inch sus and 2 inch body?
Cheers for the good vids boys👍
Rear coils were only 2inch
Front is a D40 setup with a 4 inch coil
Rear can’t go higher without a sub frame lift 😎
Also had the 2 inch body lift all round
hey mate a bit late to the party but I'm thinking about buying a pathy, how much do you reckon this lift in total cost you?
Hard to say , prob about 1200
Love your dobbie miss my one
Where do you get your parts ?
I haven't a clue which end of the truck you are at?
Where did y’all get the sway bar links?
That’s my hoist
Lol
How can i contact you for lifting my 2018 pathfinder.Peace
What control arms are you using and have you noticed them make a rubbing noise at all
not sure of the brand, they came in the kit, the reason I got them is so they dont rub mate, more clearance for more travel
how is the ride quality over stock. The rear of my pathy rides like shit, it wants to bounce all over the road when I hit a pump.
How hard was the body lift? Did you have to extend brake lines?
Hi Liam, Pretty easy, release spare tyre, remove underbody hook, lift radiator shrowd, trim motor cover, release steering rack and thats about it mate very easy
Sounds pretty straight forward. Hopefully my aux tank doesnt complicate it
3:48 lol
what year pathfinder do you have? and what suspension did you get for it? i’m trying to lift my 2006 one
this is a 2006 with adjustable coil overs and body lift
How much did it cost do the lot?
So do you have a 6 inch over all
How do you go with the legalities associated with such a large lift?
For crying out loud replace the roof rack with something that suits it a bit better. Looks like my grandads one. Oh and big wheels for sure
haha, maybe i should be different though lol
Do you have a parts list? Or do you know if these parts are available in the states?
I got these parts from a guy on instagram called Kemmal you can find him under @Kemmal_a and he should be able to give you a parts list :D
Love the lift! Have a pathy myself and would love todo body lift! You guys Qld?
get into mate its pretty easy :D
Haha I’m done spinning spanners I’d prefer to pay someone lol.
Are those control arms all terrain industries?
Looks like Mac has done a body lift before lol. I thought there would be so many things it would interfere with.
Run down in macs new nav please.
Yeah he knew all about it already haha yeah man next vid stay tuned 💪
Hey TJ! I have a Nissan Pathfinder as well and I would really like to know what lift kit or parts you used to lift you’re Pathfinder.
Hey Aaron they are RideMax coilovers in the front with d40 UCAs and king springs in the rear, pretty basic :)
Well thats quite a bit taller!!
just a little ! haha
Did Mac sell the nav and then get another one?
indeed
How much you charge to install lift kits
In the body lift do you have ti do anything on the steering rack
yes on the steering shaft there is a clamp that you need to loosen then re tighten once it pulls apart a little.
Need bigger tyres and a nice offset 😏
Is this lift kit available in the US?