KSUN KSM3 Radio Programming Tutorial
Vložit
- čas přidán 20. 08. 2020
- Just a short video I made to show the software required to programme the KSUN KSM3 two way radios. This software is hard to find and doesn't currently appear on the KSUN website so I've provided a link for anyone who needs this below:
reviews.transmission1.net/wp-...
My particular radios needed a password in order to program them with the software. If yours asks for a password you can try: 753951.
It will probably also work with the M1 and M2 variants of this radio but haven't confirmed this. If anyone knows of any better or alternative software that can programme these radios then please leave a comment below!
Hope this helps someone! - Věda a technologie
Hello, Thank you for your video. Have you found any other software for this radio?
Dear friend. TX power say Low. Did you made any changes here or "low" is default setting ( factory setting)? Best regards.
Hello, great review. I'm thinking of buying these radios for camping in the United States. Will I need to reprogram these? Can I use these right out of the box?
Thank you for this video it worked :) do you have the passwords that didnt work? I also have the KSM2 and I think it needs a different password.
Is it possible to configure VHF frequencies in this radio that is UHF? if is.. how to?
Good video! The problem is the radio's spec says; up to 480MHZ and the program is limited to 470MHz
Can this be programmed to 476-478 MHz?
Without software, may I program the radio saving new frequencies ?! Because there are only 2 buttons and the user's manual is written in chinese only!!!
What was the radio (no display) you were testing last week at the cliff at brid? I was at Mr Moo's if you recall?
Hey, sorry for the late reply! The radio was the Baofeng VF-V8. I've just published the video review and I think you're actually on the radio test ;) czcams.com/video/T8JhH8q8OmM/video.html
Does it work only when the manufacturer's program cable is connected?
How to you get these radios to communicate with other brands of radio???
Would anyone know how to programme this radio on 476- 478 MHz?
Smart radios.
how to know the password. I bought M2 from aliexpress and now I can't programming it
Hi nick here from Portugal, what cable are you using,, and I have asked for the password and they did not give it to me
Hello im looking for ksun software for a zl10 and zl60
It said "invalid port". can you help?
Helps a lot! But unfortunately the password does not work on my M2. What were the alternative (wrong) passwords you got?
Sorry I don't have any more passwords. I messaged the seller on Aliexpress and they sent me the other passwords but unfortunately after a year the messages are automatically removed from the messaging system so I no longer have the details :( Maybe try contacting KSUN through Aliexpress. Where did you buy your M2 from?
@@Transmission1 thank you for your reply, I indeed contacted the seller (also from Aliexpress) and got my password: BF666S. I went through a long search for the right software where I had to figure out all the small issues you describe in your video, eventually getting stuck at the password step... Not sure each seller has a different password though.
@@fabiosbrizzai9354 I am pleased you got this sorted out. I am not sure why they persist in setting odd passwords on the programming software unless it is to set restrictions for frequency range in certain circumstances? Great little radios though.
@@Transmission1 I honestly don't know, could be to keep re-selling under some control? However the sellers seem rather open to share the passwords, I got an immediate reply after asking.
My main concern was actually that this radio came pre-programmed to frequencies within the 70cm ham band without any indication whatsoever. I had to figure out both the frequency and subtone of each of the 16 channels myself, using my other radio (VHF-UHF dual bander). I could just use it that way as I am a licensed amateur but if you have no way to figure out these parameters the radio is pretty much useless. And provided you can, you are not allowed to use it without a license (at least in Europe).
After I reprogrammed it, it now works on the PMR band and is therefore license free (that's the way it should come, IMHO) and compatible with my other PMRs, so wife and kids can also use it.
Besides that, it is indeed a great little radio, modulation is crystal clear and range is reasonable, given the size and the antenna. If you need to be reachable (within some hundred meters), just put one in your pocket and you will forget about it until someone calls you...
Try : 75351
Apakah ada yg punya sofwere Ksun x30 lt.?
Did anyone measured the real power? The seller says it's 8w, but i doubt it. Thanks!
It's more like 3 watts output but difficult to test as there is no removable antenna.
Hi, i'm stuck on "Search COM port...". What do i have to do?
Oh, i guess this is programming app only for M3 only. I have M1 and I don't know where to find the right app.
You had more luck than me. Mine would not detect the COM port even though the correct one was selected.
Managed to get it working with another version of kdc70 software from the manufacturer
@@tech-rich Would you mind sharing the file ?, I am having the same issue :(
@@tech-rich please share, i need it too
same password?
@@laurentb9383 Sorry, I seem to have deleted the installer file in a recent clear out. I bought mine from Aliexpress and the seller was quick to send a link.
Всем привет. Купил ксун м3,понравились. Хотел узнать какие частоты да и зайти посмотреть настройки. Всё скачал установил на комп. станция не читается. В чём причина? Наверно не подходит пароль. связаться с производителем не получается.
Может кто что знает про пароли?