FIRST LOOK AT THE NEW PICOSCOPE (4425a Advanced Automotive Kit)
Vložit
- čas přidán 27. 06. 2024
- Interested in the 4425a or any other diagnostic equipment, visit my tool page here www.scannerdanner.com/tools.html All affiliate revenue I earn from AESwave is being donated with a matched offer by AES, to help techs across the world who may need help buying some equipment.
ScannerDanner Tools:
www.scannerdanner.com/tools.html
www.amazon.com/shop/scannerda...
For more information on this topic, I have written a “field manual” called Engine Performance Diagnostics which is available at www.scannerdanner.com as an eBook or paper book.
Want even more diagnostic training? Whether you are a DIY trying to fix your own car, someone looking to become an auto technician, or a current auto technician that wants to get more into diagnostics, subscribe to ScannerDanner Premium www.scannerdanner.com/join-sc... There is a 14 day free trial.
On ScannerDanner Premium I will bring you right into my classroom at Rosedale Technical College. You will find page for page lectures taken right from my book as well as exclusive classroom type case studies. What is so special about these classroom case studies? I pull live problem vehicles directly into my classroom and we troubleshoot them in real time, using and applying the theory and testing procedures we learn during the classroom lectures. There is no better on-line training of how to troubleshoot automotive electrical and electronics systems anywhere!
Disclaimer:
Due to factors beyond the control of ScannerDanner LLC, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. ScannerDanner LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. ScannerDanner LLC recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of ScannerDanner LLC, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not ScannerDanner LLC. - Auta a dopravní prostředky
You’re such a humble guy that’s why I watch the channel, instead of saying pico stole your idea for the jumper wire idea you just say they thought of it too! Good man
Interested in the 4425a or any other diagnostic equipment, visit my tool page here www.scannerdanner.com/tools.html All affiliate revenue I earn from AESwave is being donated with a matched offer by AES, to help techs across the world who may need help buying some equipment.
Show the air bag goof! It will get it out of all of our minds and "explode" some reality for people who need it. Make it a do's and don'ts
This is totally like the new PlayStation for techs! Mom can I get one!
Pico is really stepping up an already Awsome tool! Can’t think of a better guy to show case it! Thank you
Incredible, you're making me want to get one.
SD,I think, the video with the airbag, is going to be one of the best lesson that you are going to share with us ,ever. All of us (technicians),we now that in our work, thinks goes wrong sometimes,unfortunately...
MAN, Caleb is killing it with the editing! God bless your family, Sir.
Thanks for the overview, a very nice looking piece of kit.
This setup has some really great features. Looks awesome 👍
That thing looks amazing! I cant wait to see you put it to use!
You and me both!
Great video, Paul and Caleb. That's definitely on my to buy list. I just got a new job. I'll be back in an independent shop mainly doing diagnostic work, so I will need to get one soon.
Nice first showing of the scope Paul. Looks like another winner from Pico.
That kit has everything. Wow, pretty impressive.
Great bit of kit, I can't wait to see it used in your upcoming videos! 👍
Great run down and explanation of new features!
But man! That must’ve been one hell of a day when those bags went off!
Wow, that is one helluva kit. Really like the smart leads and clamps.
Lovely Pico! I hope someday get one! Thanks Paul!
Man, looks like they thought of everything with this one! Glad I held out this long! Thanks for the demo, Paul - that was fantastic! 👍🍻
Thank's Smitty
Man that looks awesome ! Thanks sharing this Paul .
Yes , I loved the Unboxing , I have to save up for this one , Eric O @ South Main Auto got me hooked on some of the Tools in his Tool page , But it won't be long ! Can't wait to see it in action Thanks Paul
OMG you have to show the video of the air bags!
Very cool I want this is a awesome tool and very complete!
thank you Paul for another great educational video.
I WANT TO CRY!!! i bought the last gen and i want to measure resistance and now they come out with the ability to do so with this one..
Thanks Paul, great video!
Really nice kit, looks cool. We had a pico at my tech school but nobody really showed us how to set it up or work with it. I did have one instructor who directed me towards your videos which is how I started watching your videos. So I guess he taught me a lot.
Thank you Jonathan
Pico is really nice, I like your new tools congratulations
Great intro to the scope!
I'm glad you like it
The air bag, Such an honest guy.
i bought the older version of it in december 2019. absolutely nice starter kit regardless of being the "starter pack". Ordered it from UK amazon but as being more hobby-mechanic, i needed to use the 4 channels recently and found out that one of the cables included was short-circuited...haven't been able to get in touch with the seller yet, but i probably need to do extra 50eur shopping for new one. Regardless...im very satisfied with the pico quality and i can't wait when im confident enough to buy also the pressure transducer....i think i order it from aeswave this time
Man, this is what I always admired at the American industry: they think about everything! Thanks for sharing, Paul and Caleb, and hopefully we gonna see you in action very soon with the new monster!
Pico is actually a UK company filled with great people 🙂
@@ScannerDanner I could have swear it is American... Anyway, great product!
I'd love to see that airbag video in full. It seems like a good learning lesson to experience. Any plans to release it?
Looks a nice bit of kit dude liking the smart plug system. time to invest in a new one I Think thanks for the video paul.
nice tool gettting better all the time
Nice run through Paul 👍going to or 1in the next few days 😉
Great explanation, look forward to going through the rest of your Utube channel and learning more as just purchased mine this week so have a lot to learn and experiment with.
Looking forward to your comments and questions. Thanks!
@@ScannerDanner I must thank you for your Utube videos they are really informative and very helpful.. Especially learning to sort out difficult faults and using Picoscope. I have the 4425-035 Model with the full kit but not to your latest level but still a great kit.
Would love to see a 2 or 3 part course on the PicoScope 7.0. Other classes are great just dated.
Gotta get it! Only thing I don’t like is that I sometimes use my Pico clamps with my snap on or otc handheld scope for quick checks or parking lot work. Either way this new scope is bad ass and I love the thought of not having to pick probes and setup new channels.
Love watching your tutorials. Shame you don't work here. I've had a garage looking at my car for 6weeks now. They have been diagnosing for a total of 7hrs at £70.00 an hour and they haven't fixed yet. Come on Paul, move to UK. Keep up the good work.
Here is a little education for you!! LOL I have learned so much from you so I will share this. You can extend the USB3 Connection with an "ACTIVE" Usb Extension Cord. Been using that for a while now.
nice! when I google searched the 3.0 lead, I saw that they were making stuff like that so I never gave a spec. Glad I didn't
Paul it would be cool to see you do more vids with the NVH kit. I remember you once used it on your truck I believe in the classroom. I think it was a front axle issue iirc.
Awesome !
Holy exploding air bag Batman, I mean Professor.
Good stuff Professor.
6:52 I imagine that running tests on EV's might require a temp probe. It makes sense when independently diagnosing a BMS low temp issue due to a faulty BMS sensor or something like that.
Nice scope, it worth to have it
Very nice
mechanic's wet dream!
It certainly looks a comprehensive kit, especially with all the extras. Nice to see its backwards compatible with older accessories.
Great unboxing, I went for the standard kit and now I'm jealous 😂, can never have too many ways to connect. This really is a game changer and removes 90% of new user hurdles re setup and connections. I love the Pico7 software as well. I winced when the airbags went off 😂 Stay safe Brother 👍
Paul, that air bag clip is some funny sh*t ! Bet you didn't think so at the time ! LOL ! The new Pico is sweet dude !
That was so funny, I had to watch it a second time ! Sorry dude ! LOL !
Good information a,+
Very jealous of the new Pico there. I got my 4425 last fall; I really hope they continue to support the standard 4425 as I'm thinking about a pressure transducer. Not sure I like the new attenuator setup though.
I just looked at them last night. But, I wonder what the contacts will do over time.
Good presentation. The strength of the 4425 pico in general is the speed of the unit and the software. I see this new kit/scope as an updated for those purchasing for the first time, or upgrading from a very old scope such as a generation 1 Vantage. What additions would justify a purchase if I already own a 4425?
lol too late steve over across the pond already showed off his. but thanx. i like the accessories and the auto id feature but am wondering how those contacts will hold up in a field environment. perhaps you can show the software in action sometime soon. am especially curious the frequency the park assist sensors use
Okay, i'm scope jealous now.
I'll get one when i can afford it untill then i'll have to make do with my older kit ,what do you think of the new software?
Great video. I'm looking for a good scope because the Zeus gives a lower resolution than pico.
We want to see that airbag full diagnostic video!
Nice kit. I’d have to question the need for so many leads for only 4 channels. All accessories are available for purchase if cut, burned or lost.
The good new is the 4425 is on sale now at aeswave!
I know this is an old post, but as for the resistive Flexray cables, was there any idea how much resistance those leads have in them? I was reading that in some cases special leads for Flexray were needed, and I can see why now, but they were really expensive.
Nice👍
Nice way to include that airbag footage lol that must've been a serious surprise 😆 good thing i didn't touch the module. Bolting down is the way to go. Great video Paul
A surprise is an understatement my friend. 💩💩
That would have been expensive surprise. 🥶🥶
I had recently purchased the 4425 kit and was not overly happy that the 4425a was released only a few weeks later. I wish Pico had done more to advertise the up coming release both before and maybe even during my purchase. A small investment for a professional garage I am sure but a massive price for an individual car owner looking after their own vehicles. Still a great piece of kit, Pico should be aware if not already that many people including myself have purchased their product due to your extensive use and praise of their automotive scope.
Who did you buy the scope from? Maybe they will work with you on an exchange. I'm sorry this happened to you.
ScannerDanner Direct from Pico online. No need to apologise, they are a business and these things happen. I have kind of gotten over it but sometimes it just pops back up and drives you a little bit mad 😡
Wow that have thought about just about everything
Good investment 👍👍
Can u make video on Resistance Graph and Reverse Senor signal. It would be very interesting to watch.
My hantek will do the job until I can afford to buy one (probably never) but hey, nice tool anyway Pico.
Nice
Did you say that it was about the $1000.00 mark....I've just had a look here in the UK and that is .....wait........ for........... it.................. £3,114.00. I would need 2 to 3 jobs a day to justify the price here. I know it's ram packed with all the bells and whistles, but that here is some serious outlay. Keep up the good work by the way.
no sir, i never mentioned the price
It's nice tool l want to learn about this tool vary will
Man those picos are the best on the market......but I'll never have one but I'll learn from you using it so it's all good!
Thank you Paul and Caleb. Good job. Do you have to use the new Pico 7 software or can you still use the Pico 6? Have a blessed and safe week to you and your family.
Good question, I am not sure. The software is free to use for everyone, so at least there is that right?
Hi Bill, you can use both but you must install the latest version of PS6 from the website www.picoauto.com/downloads. Please take a look at the release notes for extra information on both PS6 and PS7.
I see they upgraded the price too. Wow.
Hey Paul, I got my advanced kit through 4 days ago. The Premium 6 way break out leads were not in the set when I opened them. The bag to hold the leads is in there, but no leads. I noticed you said here you had a separate delivery for your leads, did Pico inform you of that after you had purchased the kit? I have contacted the supplier to see what is happening as it says on the site I bought it from that the leads are in the set description. Been 4 days now and no second package has arrived. Still waiting to hear from the supplier as well.🤔
AIR BAG 101 most RCM modules have a roll over sensor interal to the module. Lol good stuff. Bad ass scope also.
It is my understanding that only the ones with side curtain airbags have this feature as part of the module itself, as I have worked on my airbag systems in the past and never had an issue, maybe I've just been lucky? Correct me if I am wrong, thank you!
I guess I would have to stick to my older pico because I started with a bare bone setup and bought my accessories from aftermarket companies and use them with my pico to save money . LOL
Love the Pico scope👍
I hope someday I will be able to afford one😉
Great work Caleb👍
Thanks for sharing SD👍
Stay safe Guy's❤
Is the new resistance lead nothing more than a standard "smart voltage test lead" that is programed to set the scope to an auto range ohm scale ?
No, to measure resistance you have to supply a known voltage across the circuit. That is why you cannot measure ohms on a live circuit. This test lead has an integrated circuit board so it works the same way a multimeter would, but the scope is doing the measure and conversion to ohms.
Was working on a SUV one time and had the center console apart. Well under the console was the SRS module. Wouldn’t you know I dropped my big flashlight right on it. Can you guess what happened next? I feel your pain Caleb
oh damn, that made you jump I'm sure!
Omg the airbag plz show the video lol 😂
Does aeswave give discounts for viewers ?
Yeah buddy from Aleskyfinis
Hi Paul..i got a new 2000 series pico today..the picoscope 6 software is not being installed on my laptop..plzzzz suggest what should i do??? The microsoft.NET Frameqork 4.5 Web is not being installed.
Pico and snap on should work together to make it all plug and play.
Where is the video that shows the air bags coming out?
i still lol hard at the airbag clip.. I'm always afraid to touch anything on them heaps with airbags, I don't like driving them either lol
SD i believe they use Lithium ion batterys in the amp clamps no more 9 volt batterys
no batteries at all (from what I am told), they are powered by the scope
I want one so so so so bad
Mr. Scanner, is there a low cost($300 or less) bi-directional scanner that you would recommend for people that want to work on their own cars?
a good bi-direction scan tool will cost you at least $1000-1500
a new lesson on airbag system :)
That was a friggin good one. I missed that video. Maybe it was demonitized and not recommended for all the swearing that MUST have taken place.🤣😣
I know what I am asking Santa for this year.
can i get your old used up one really like to try one.even an old used up one.please please please
Question when you plug in the voltage test lead and it identifies it. Will it automatically scale the voltage or do ya still have to set up the range. This looks much better than the ats escope. Damn Paul must of used his trump check to buy this thing it’s 3500 on aes
The scope will auto scale to the levels it sees. Also, PicoAuto sent me this scope for free and honestly, it was sent as a thank you for all of the scopes they've sold over the years from people who mentioned me as the primary influence on why they bought one. So when I did this video, I didn't have to at all. It was my way to say thank you back to them.
So say I’d check a charging system it’s charging at 14 volts then all of a sudden shoots up to 30 volts. Would it auto scale? I’m still using the old busted down verus model you had years ago only for a scope not a scanner. Got this on the list after the cardaq plus 3 I have the 2 but need 3 for new Chrysler can channels. I’ve been watching since ya did the injector flow testing on a neon I think it was
I just bought the older model last week and still waiting on it to come in from ase wave. Do you think the new model would be better? Would I be able to use the smart bnc on my verus edge?
You cannot use Smart BNC on anything other than the new Pico scope. It uses standard BNC size, but does not twist to lock so the lead would fall out unless you taped it together. You also wouldn't get any of the Smart BNC benefits of probe recognition or powered clamps because those use the 6 pin connection the Verus would not have.
@Scott Andresen Thanks for jumping in here and replying!! Please continue to do so with some of these questions. Do you work for AES?
@@ScannerDanner Yes, I take care of tech support and help Carlos and Jorge with product development.
@@scottandresen806 awesome, please feel free to answer any questions that my community may have about this scope and where to purchase, (from AES of course)
1:50 lmfaoooo
How do u hook the pico to the lap top ? U never showed us that ?
Usb cable
Holi !!
AES WAVE says the pico is on atleast a 2 week backorder if i ordered from pico directly would i get it sooner or same time seeing as AES wave is a distributer?? I've emailed aes wave and pico asking this and havnt recieved any responses yet just curios on what you think
if you want to email me at support@scannerdanner.com with this message, I can forward it to my friend Carlos at AESwave, thanks!
@@ScannerDanner will do thank you so much