Immobilizer 2 and 3 Key Adaptation
Vložit
- čas přidán 16. 01. 2012
- How to do Key Adaptation on most 2000 to 2006 VW and Audi vehicles. You can find more Immobilizer information at our wiki website:
wiki.ross-tech.com/wiki/index.... - Auta a dopravní prostředky
![Audi, VW, Seat and Skoda IMMOBILISER explanation and repair [immo emulator install]](http://i.ytimg.com/vi/m8D0OXRL964/mqdefault.jpg)
Wanted to add to this, one of my keys was lost, so after I entered my pin code and started adaptation, I lowered my key count to one, saved it, closed out, and then restarted the process of adding a second key. Working great now. Thank you.
Why don´t you just add function to read the immo code so you can make our lives easier???
because then anyone can just steal your car
Your Are Amazing !! I Have A Friend Of Mine That Riped Him Off By Giving Him An Unauthorized Key After Paying For A Volkswagen Jetta . Thank You For The Very Magnifying Clear Explanation And A Solver . My Friend As I Speak Is Calling The Guy He Purchased The Vehicle Now !!! I Cannot Thank You Enough. I Really Can't Thank You Enough 😘
Informative video. Great quality. Keep up the content!
For anyone looking to retrieve the PIN, there is a tool called VAG KEY which is able to do it.
Worked great in my mk4 golf .. thx 😎👍
Hi!
I just bought a new dashboard for an Audi A3 8l, and I was wondering if it's possible to change a chip or something between the old and new dashboards so the new dashboard recognizes my old keys.
Do you need to program the new cluster for the functions like air temp, miles to empty, ect to work? I've swapped my old no screen cluster into MFA bora sport one but it's not displaying any info.
If have the pin code, but no adapted/programmed(original) key,will vcds adapt a new key to immobilizer???
I checked the vag scan and i asks for a 5 digit pin or a 7 digit PIN / SKC where can I find any of them?
hello, I have the same problem you describe in the video, my car is immobilized by this system. I can use this step by step with that code you used to call it again?
Thnx for the video it's helpful my remote stop working i try replays new battery the light even stop flashing can it repair or use another car remote
If I swap instrument Cluster (VDO) should I change transponders in my old keys to match them to new instrument cluster ?
100% all work :-)
very helpfull.thanks
A key left in the door that used to work will no longer start the car after adapting the other keys. But can I readapt the key which used to work? Or it depends if it has transponder for Immo 2 (readaptable) or transponder for immo3 (not adaptable)? thanks
What is the different between remote adaptation and key adaptation then?
hello i have a 2006 gli that key got lost, had a locksmith make a newone but he never reprogramed the key... i have another car same year that is wrecked it starts good my question is if i replace cluster and steering column ,would it start? thanks
Will this work on WV Polo 2004?
Tnx!
Did this procedure works on Touareg 2.5 TDI 2004 year? Thanx
Is it possible to code any key? or do you still have to have the key specifically cut?
xk mi jetta funciona media hora y luego se apaga solo y despues de 4 llavasos prende nuevamente
Does a 1993 transponder key (not a button fob) two wire diagnostic port have a security code for immobiliser?
I've always had a problem with my keys since I bought my car I min the remote control works the next min iam having to open the doors manually. ..but just recently I've been having problems in starting the car it starts runs for 2 secs then dies...it starts when it wants to ..what do you think could be the problem with my car
will this work on a 2002 audi a4 somebody try to put my old key to start the car and my new not working it act like it want to start then shut off and the key light on the dash is blinking i need help
Its posible to use this method to change the cluster?
I own an Audi A3 2000 and I found an S3 2000 cluster and when i tried to change it, had this problem.
Quick question...if I change out key ignition instrument cluster and ecu...will the immobilizer go off....if all were working parts from different vehicle
i have the same problem,i saw that the imobillizer warning comes on the dash,i used my second genuine key that i've never used before,and its doing it again with the second key....do you know what is the problem!!thank you!!
can this work for an Audi A3 2009 (8P) ???
My car wil start, then cut out again after about 1 second, the car has been parked up for several weeks and worked fine after I jumpstarted numerous times but after I drove it the other day the immobilser light started flashing have you any idea of the problem ?
what about the GOL G5 here on Brazil? Which is instruments cluster immo and asks 6 minutes to program the T48 special
Great video thank you so much Mark mangano dependable auto wartburg tennessee
This video is a little confusing. After all do you log to the Immobilizer module or cluster module to do this procedure?
Will this work for a 2004 Audi A8?
If all that is left is the metal blade (sidewinder), then it would appear you need a complete new key and have it adapted to the car.
My car is a Polo 6R.
I have misplaced the key. Replication possible? VCDS in the immobilizer information?
Is there any way, if possible?
Thank you.
does this procedure write the key to the cluster or the ECU?
good video, what happens if I do not have the pin number for my car? Shall I use the vin number in the extra place? or the one from the car ID? please heeeeellllllp
Thanks for this great video! Do you know or anybody else can I do my key immobilizer adaption (VW Polo 9N) with VCDS? I've broken original transponder chip (everything else in key is working) and I want to replace broken transponder chip in key with blank one and adapt it with VCDS. Is it possible? Of course previously I would get SKC PIN code from my dashboard.
Hey, after swapping instrument cluster the airbag warning light stayed on. Is there anyway to fix that?
Will it work for Octavia 1 Tour from 2008?
Hello,
will this work on a Skoda Octavia mk1? Thank you.
Hey! Im having the problem.ylu had before 4 years , same on Skoda Octavia mk1 😄 Could you please explain how you fixed it ?
IS IT POSSIBLE TO PROGRAM THE KEY WHEN WE GOT THE PIN CODE ?
HELP!! i replaced the entire ignition portion in my 2008 vw jetta 2.5 it came with a valet looking key my original key+fob will go into the ignition but obviously no longer work the fob works to lock and unlock still. the new key will turn the car on and off and will turn the motor over but then it dies after a second and the dash displays "safe" what do i need to do? i am a long way from any kind of dealer and dont have a lot to spend. i really need my car any help at all greatly appreciated!!
One of our distributors sells a tool that can retrieve PIN on some clusters, AE Tools. But it isn't cheap, you are better off finding a local locksmith who can perform the service for you. There are a lot of crap tools that claim to be able to pull PINs, but we get phone calls and emails all the time from people using these crap tools that get wrong PINs or worse, bricked modules.
i got a wolswagen golf my remote been destroyed i only got the key metal but i cant make my car star when my car star doent wanna work what can i do
Can i do immo off with this tool?
I wanna know how to read IMMO3 PIN Code for an Audi A3 2002.
Pmsl @ Ross Tech :-))
Is no good do you have any answer for me they want to buy a engine this flashing light happens before but now the dealer want to tell me something different help me if you can
anything for later models via link please? Greetings from the UK 🇬🇧👍
Does the pin cost money to get from the locksmith?
I need to this method to apply a new key?
Hi!
Is it the same immobilizer key adaptation for others VAG automobiles? Especially for seat leon 1m 2002 year ?
should be, yes
@@maluch792 yep, it is. I tried it 😀
IM REALLY AFRAID TO REMOVE THE NEGATIVE LEAD FROM THE BATTERY of A 2008 NISSAN ALMERA TO WORK ON IT.CAUSE IM AFRAID THEN WONT START AND ILL OBLIGATED TO TAKE THE CAR TO THE DEALER..IM FURIOUS NOT KNOW ABOUT THIS SUBJECT,,IF THIS ISSUE HAPPENS HOW I CAN MAKE THE CAR START AGAIN? WHERE ARE THE PROCEDURES?HOW MUCH? DO I NEED A NISSAN SOFTWARE TO PUT A CODE? DO I NEED A STEP BY STEP INFORMATION WITH THE KEY LIKE THIS VIDEO PROCEDURE?I NEED INFO AND I DONT KNOW WHERE TO FIND IT OR BUY IT
i have this light flashing on a unlocked ecu. car runs fine. can i just remove the LED ?
Like
How to get pin code you enter ?
Sorry for late reply. The code is provited when you buy car from seller or if you lost , need to be extracted from dashes eeprom with programming softwares tools...
i was just in this problem. all i did was turn my key to the on position till the emoblizer symbol went away.. once its gone ur good to go. takes about 10m
Thx
My car has the same issues and am wondering if this method works for Volkswagen Polo
How you get the pin?
I have a third "flip" key with a transponder coded to a different car. Does this method mean I can add multiple transponder chips to the ECU? So long as I have the PIN for the ECU?
no it has to be a new chip.. they on ebay! ID48 T6
What are you guys talking about?
The audis and VW uses 48 glass chips before 05 and 48 can after 05. Once the chip is programmed it can't be used on other car because it locked now. It can be earesed and programmed again only to the vehicle it locked to. So to program it to another car it needs to be unlocked first which is usually more difficult the buy a brend new blank key.
...
Hi good day can u please help me to disconnect my Volkswagen microbus 2.3 alarm and mobilizer
I can't seem to program a second transponder (key) into my car. Somebody told me it's because it's possibly a 1st generation?!
If you have a ME7.5 ecu then I know a way to retreive the pin
can I do this without the pc... for 00 can't it learn it itself I hear?
if I use the key that works to start it start it... now listen. take that key out of the ignition and insert the new key, and start it within 5 to 10 seconds immediately. The car will start and stay running but the immobilizer light will stay blinking and I can actually drive anywhere, just first thought was can this damage my ignition system or stall out while driving?? Not on mine it's got the code on another device saved but can be simply deactivated in a hidden spot. Why they installed a pull away chip.. known as a smart key.. Haven't seen these for years but some junk yards you see them a lot on other vw's which they had snaped it in half so you can't pull it out etc.. Was wondering if they had other crap installed by chance like a breaholizer machine and just upon removal left the other wiring and installed a chip??? Thanks. I bought the car this way.. planning on putting remote start on this. Should work.
um, I programed the key to unlock etc. and got the key cut at dealer but I only am looking to program the key to start the vehicle. For spare key.
Sir Skoda fabia without scanner lmmoblizir reset pliz
So if I don't have the PIN I'm screwed?
no, there is another software you can read the pin, or some tools on amazon and ebay that help you read the PIN
hi where can i find the code for the immobiliser?
You ned VAG K+CAN 3.6 for finding code nad VAG KKL for programming key.
hi i have a golf 4 and i lost my key chip
i dont know what to doo pls pls pls somone help me i have vcds and premiumcode pro machine
reply my comment and help me
Mr. Ross Tech, I followed this procedure because I bought a previously used key with an IMMO2 chip inside of it and wanted to match it to my car. After rematching my own keys (x2) when it came to this "new" key the yellow light kept blinking and VCDS showed me "ERROR" on the screen. Do you know what migh be causing this? Thanks.
VitorBart My guess would be that used key is no good. I have personally matched up used Immob 2 keys to different cars without issue.
RossTechVCDS I'm sorry, how come an used key might be "no good"? It's just a blade that starts the ignition with the IMMO2 pill inside the plastic case right where it's supposed to be. You mean the pill might be bad, is that it? If so, could you provide me the correct specs for my car? It's a ROW VW Passat 98 AEB. These t48 pills sold as "new" would do the trick? Thanks!
Will a used key work for this? obviously i would need to get a new key cut on the top part. i was told that the pills in these keys can only be programmed once. is this true? has anyone ever used a used key before?
Immob 2 keys, yes, they can be reused with different vehicles. Immob 3 keys get locked down to the system they are matched up to.
Hi, is it possible for seat ibiza 2010? How I can do it? thx
No different far more modern set up on anything past 2005 I think
Where do u get that software
Ross-tech website. Recommend getting unlimited vins like i did as we both have vag cars.👍
THERE S TWO 48 TRANSPONDER 48 & 48 LOCKED MAY BE YOU USE THE LOCKED ONE
Hello, I tried moving the parts from my old VW golf 5 key to a new case, unfortunately I broke the immobilizer, what is to be done now ? Good thing is that i still have a key
its a VW golf 5 from 2008
Buy a new transponder ! But depending from the year of your VW Golf, you may need to ask a locksmith to prepare it.
Probably ID48 TP23 chip.
Por que el VCDS no es capas de extraer el código secreto de la llave 🔑 y hay que usar otro programa.
Con tanta tecnología que tiene el VCDS
TENGO UN SKODA FABIA 1.4 MODELO 2003, PERO NO LOGRO ENTENDER POR LA BARRERA DEL IDIOMA ALGUIEN ME PUEDE AYUDAR?, MI MECANICO LE METIO EL ESCANER PERO NO PUDO BORRAR EL ERROR, Y ESO ME TIENE ABURRIDO POR QUE SIEMPRE QUIE EL AUTO LO DEJO DIRECTAMENTE AL SOL SE ENCIENDE ESTE TESTIGO Y MI MECANICO YA NO SABE QUE HACER ALGUIEN ME PUEDE AYUDAR?
+Cordobin Cordoba que porblema tienes con tu vehiculo? cual luz se te prende?
+Robinson Araujo trata de conseguir el numero e informacion del codigo que le removio al vehiculo, tratare de ayudarte en lo que pueda.
Gracias robinson, se enciende el testigo carrito con la llave, pero noto que eso solo sucede cuando dejo el vehiculo expuesto al sol
Robinson Araujo
Gracias robinson, se enciende el testigo carrito con la llave, pero noto que eso solo sucede cuando dejo el vehiculo expuesto al sol
donnez moi le prix de la machine
I gat one on my channel
Ross Tech does not support the Nissan product line and none of us at Ross Tech own anything from Nissan. I would suggest finding a Nissan web forum and asking there. Also note that your keyboard is defective and should be replaced.
RossTechVCDS en español
www.vag-com-espanol.com/
Hi, is it possible for seat ibiza 2010?
So the screen says 13861 and you put in a different pin so what is the point of the 13861?
13861 is enabling adaptation like setting mileage for NEW instrument cluster etc. But immo/key adaptation enabling need its own
PIN and every car has different PIN for that.
@@mr.jones-932 and where does one find said pin specific to the car ?
@@mingiasi Like mk4 golf, B5 passat, B5, B6 Audi A4 etc. you can find it from instrument cluster with right OBD equipment.
@@mr.jones-932 Thanks for the tip!
@@mingiasi Np. Good luck!
OK, you say a PIN must be used. How do I know my car's PIN? I still have the plastic bar that came with the spare and valet keys when the car was new. The plastic bar thing encloses a strip with all the key ID numbering and I was wondering iif the PIN is on that bar? BTW, it's a 2004 Audi S4.
For a brief time around 2001, some VW and Audi vehicles had the PIN info on the black plastic key tag. From that very limited event, it has morphed into the false story that all those black plastic key tags have the PIN on them to this day. As I recall, VW and Audi stopped doing it about a year after they started it... but the rumors live on.
We still suggest to contact an automotive locksmith to get the PIN. The dealers do not have direct access to that information.
@@RossTechVCDS Thank you I appreciate the response.
I need help, I do the procedure I go to 17-instruments, I am able to log in with pin number, go to adaptacion read channel 21, the stored value shows 1 but when I click Up to set new value number 2 in test value field I get error and I'm not able to add a second key to immobilizer, Does anyone have and Idea of why this is happening?
have the same issue, did you solve it?
@@KolokoLOVE yes I figured it out in my specific case the fuse to the comfort module was open I replaced the fuse and then I was able to program keys my model was a 2002 jetta and the fuse it's in different place than the diagrams points to
How to do this procedure in 1T0 920 872 E? The "Login" option is not available.
If a function button is greyed out, then that control module does not support that function.
will this work on a mk3 golf??
cheers
Gurmehar Ranu In the US market, the mk3 didn't have immobilizer. This video shows for a system where the immobilizer is integrated into the instrument cluster, address 17. In some markets outside of the US, if a mk3 has an immobilizer, it will be a stand alone system, address 25. We have some info on this on our Ross Tech Wiki site.
RossTechVCDS ok thanks mate!! I am from Australia. i think i have a immobiliser. Question: What do you mean by address 17 and address 25??
The key light was flashing on my 2002 Audi a4 it take it to the dealer and they are saying that my ingine
Can some one help just did heater core and had to take dashboard out and do the job put it back together and all of a sudden the immobilization is activated it's 02 vw jetta vr6 whts up with that it ran when it came in fine but now it's activated had battery disconnected for almost week an a half please help do I have reprogram system, key....
Will this work with OBDEleven Pro?
Hello..i am interested to buy vag diagnostic tool..any recommendation??thanks
Have you checked out the URLs shown at the end of the video?
RossTech works great and we use multiple licenses of this product at our shop. My only wish is was that it could extract the key PIN codes as a complete package. Other tools are necessary to do that. But I assume that RossTech is not doing this because of legal issues.
Do you have any address for your company?
1:15 pay your bill ?
Without seeing the car first hand, we have no way of knowing for sure that the real issue is. Have you tried a battery jesus? This is where you remove the battery cables and touch them together for 10 seconds. That might help. You could have a bad key as well... but without further diagnosis, we can only wildly guess.
Please help i want to adapt 2 remote for central locking ,but when i use vcds it says not available ,with both of the keys i can start the car ,but i cant program the central remote mechanism to work please help me step by step i will be glad .
Without seeing the car first hand, it is hard to say what the issue is. Maybe the keys are bad. Maybe the reader coil for the Immobilizer is bad. Maybe the Immobilizer itself it bad. Maybe it is something else, no way to know without diagnosing the issue.
Can you do this for a Hyundai sants fe
i change my mile an hour and i have problem with faucking codes
hey! i tryed the control module finder, and idk what happened but my car just wont start now whats wrong can you tell me????
That's an MK4 model
helo how can i find the PIN to enter in to the program ?
+robert cristian Same here, where can I find the PIN to enter VCDS?
+Zeightar Downlaod vag eeprom programmer. Using a generic blue vcds lite cable go into vcds lite hit options and change the cable to kwp2000 protocol and save. Then using eeprom select cluster and then read. The pin is labelled under login with other cluster info. When you enter the pin in vcds add a zero to the front. 01234
+Edward Tomlin-Browne What do you mean by select cluster?
When I press read, it says No ECU found...
What cable are you using?
+Edward Tomlin-Browne KKL VAG-COM 409.1 Blue cabel