Video není dostupné.
Omlouváme se.
Going with a BIGGER degree cam, 276 Estas Cam fitted.
Vložit
- čas přidán 19. 01. 2021
- Standard G cam was worn worn out and I suspected thats where the noise on the head was coming from, so ive decided to replace the stock cam with an upgraded 276 degree cam .
That's valves getting bent it's happened to me before. The timing gear is 180 degree out.
Im just lost in what that noise could be it sounds like metal on metal.. maybe should have taken off that valve bucket on that lobe to see if the spring is ok.. its gotta be on that valve because that lobe looks like it was in a fight there bru.
It can be your bottom aswell if one of bolts is broken you also get a knocking noise
Check all your bearings. On all your pumps.
Oil and power steering
If you got one.
If you got aircon
That too.
And your alternator bearing
All the bearings bru
Start buy pulling off spark plug one too see if sound goes away if not move on 2 3 4 bearing knock maybe
Take the cover off now and see if the new cam has scratches or interference on.
cams still good
Sounds like lifters....u should of check it before putting in the cam....taking it out cleaning it lay an let it lay in oil again
Why did u clean the cam w/degreaser and remove any oil that was on there??? Then no cam lube or oil when installing seal or the cam itself!!! No wonder it’s making a noise! U gotta lube that sob!! Not hating, but it is required. 👍 lube it up
thanks for the tip I'll keep that in mind next time
I self have a cti and I know the struggle 🤣😂
Lmk check youre vacuum pipe if it's not broken it's next to your motor and it sound like it's coming from that pipe
yeah it was the brake boosters vacuum pipe that was loose 😂
✌️Any problems you can ask me
@@wintleyleandrow6650 even now?
Could be the bolts on the clutch not tight
Must grind away on the head for clearance for the cam
I've got a CTI but still running with old K jet system, as it's still working fine, so keeping it for now. I have just fitted my 276 degree Estas cam I bought 2nd hand from a guy online that said "it comes out of a 8V motor." it looks like the lobes are too high & hitting the head, just by the edges of where the buckets sits. I dont know if i should remove & dremel away where its touching...? Sounds like its what needs to be done...anyone experienced this same thing? Im Too scared to hit the start button as is!
Let Lyle check it out for you
Hey man! Where did you buy your 276 estas cam? or where can I find it?
Howzit do you still have that 276 cam? I'd like to buy it from you ?
sold it with the car a few years ago
Did you properly tighten the cam to spec? I think it's about 20 or 25 NM
Also noticed your cam belt is like coming off the cam. Probably, the tensioner needs replacing
no , I just hand tightened the cam caps
It's the oil pump that isn't feeding oil
To the heaf
The oil pressure is fine , pressure is still strong
Hey boss don't you know where cam I find a second hand 276 cam
just put on the damn brake booster vacuum line geez bra. RIP earphone users
The pipes broken off from the brake booster , brake booster needs to be replaced unfortunately , I see they've already siliconed it reg before
Strip the motor, Fit 4 new pistons, bore 83mm,new rings and bearings, polish crank,oilpump do the necessary headwork en maak toe en sit nuwe top bolts in, hou op so sukkel brother and if you dont have money do what I do let it stand that,daai oliepomp is moer toe
Cam belt tensioner try to replace k
Checked the belt tensioner , there's no play in it
Hi buddy i just want to know i have a 272 cam in my car but it won't idle like a cam i just want to know must i chip my box for the cam or what did you did, did you just fit the cam or did you also chip your box?
Aye you scaring me man I just ordered one but did u ever get that idle fixed?
@@noeltorres6305 the 272 cam is less aggressive than the 276 cam if you're looking for an aggressive Idle the 288 is what you need
Bearing knock
If so , atleast I know what to replace
What exhaust system do you have on the golf?
Basically Stock exhaust system , the middle box is just removed with a stainless steel backbox and tip
Is your car sorted i see the video is posted 2 month ago and what was the noise from
yes it was the dust cover by the gearbox
Who did your box
RiceLifeSa,Do you like Rain Wifi it has unlimited data??
I used to use rain but their coverage isn't good in my area so we changed to vox
Where is the man so quiet?
went through a demotivated phase but im back
Replace the lifters
back yard mechies... vang net kak an....
piston rings
Sounds like lifters 🏋️♂️🤔
it was the dust cover between the block and gearbox that was rubbing against flywheel
I'm glad it was something small👍✌
Oil pressure? Oil pump?
Oil pressure seems to be fine still
@@CarsWithJP It depends on the flow. Pressure and flow are two different things. Just saying.
rings
He's gonna ride soon vdub fest u say