Trigger Tuning and Reassembly for Crosman 2240XL (Part 1.)

In this episode were preform a basic trigger tune on the standard Crosman Grip Frame and Trigger Assembly used on the 2240XL and other common Crosman Pistols. Part 1 covers the trigger work and Part 2 details re-assembling the pistol.
Wanna support the channel?
Support us on Patreon at:
www.patreon.co...
Or send us a SuperThanks through CZcams.
Not in a position to support financially? No worries! Your likes, comments, subscription & views all help.
Shoot straight & be well my friend.

[@johnhourcade7479]

Excellent video. I just bought a 2240. Terrible trigger especially when compared to my crosman silhouette 1701p. I polished sear slightly and used the nylon washers you suggested. But what really helped was changing out the spring. My wife had bought cheap small hand pruning shears from a dollar store. I took the spring from one of the shears and put it in the pistol. The spring is the same length but with smaller wire. My trigger pull is now very light and works as well as my 1701p. Thanks for info

[@sallykiruri3339]

@johnhourcade7479 thank you - that little piece of knowledge about the spring type is quite handy

[@davidgreen2442]

you can use a 22 rimfire used case where the white plastic upgrade you have installed use a ball pen spring inside it works a treat

[@AlsAirguns]

Thanks!

[@lyrooo326]

Oh wow! what an awesome video! I need some number 6 nylon washers! I have a 1322 a AS2250XT and an incoming 2240xl! best explanation ever also I need some of those spring guides!
Ah too bad they don't have international shipping.

[@AlsAirguns]

Glad you enjoyed!

[@salomekamau5380]

Just discovered you! You have great videos

[@AlsAirguns]

Glad you like them!

[@josephsaucedo8691]

A maurader pistol trigger and housing swap would be the best. You could up grade the sear to the currect size and add some set screw to adjust parts and a empty 22 she'll under sear are some other mods 👍👌✌️💯

[@AlsAirguns]

Very true.

[@BarnyDaddy]

I would put a 2nd washer on trigger pin,

[@BarnyDaddy]

I would put a 2nd washer on trigger pin.

[@AlsAirguns]

Even better. 👍🏻

[@propblast82nd]

Thanks Al , really great videos on the 2240 platform !

[@AlsAirguns]

Glad you enjoyed it Thanks for watching!

[@nico-max]

Hello de France 🇫🇷 interesting video but where are you buying the trigger spring and the guide ? Thanks 👍🍷

[@AlsAirguns]

Here is the company I got it from.:
mountainaircustomairguns.com/
They have a number of cool parts. I intend to add one of their PCP lowers to this pistol before I am done with it.
Thanks for the comment.

[@chrisfrerichs8360]

Can you cut the top portion of the trigger off on this model?I feel it’s too confined, or tight around the finger. Great video sir, thanks for the help!

[@AlsAirguns]

Yes, absolutely

[@MrMadenuff]

Dont over do it, the top part acts as a trigger stop. It could make the trigger flop forwards too far.

[@AlsAirguns]

I believe there is an old Airgun Nirvana CZcams video covering this mod.

[@salomekamau5380]

@@AlsAirguns i will check it out

[@jimmunch5796]

You put one nylon washer on the left side of the trigger post, and the other nylon washer on the right side of the sear post. Was this correct or an error? Very good video and audio.

[@AlsAirguns]

Yes, that's how I did it and it seemed to balance out well on this pistol.

[@MarkTaylor-nu7qd]

sounds like you just making it up as you go along . no ball bearing in the safety ?

[@AlsAirguns]

Thanks for the feedback.

[@MrMadenuff]

That goes in with the spring when you assemble the grip body to the valve tube

[@alanalford5996]

I think he meant ball detent in the safety. It’s really easy to lose those.

[@AlsAirguns]

You are correct my friend.