Crosman 2240XL - Part 2, Performance & Accuracy
Vložit
- čas přidán 3. 08. 2024
- In this video we take a second look at the Crosman 2240XL with threaded muzzle and steel breech. In this part we will be review performance with several popular pellets in addition to discussing this pistols accuracy.
Wanna support the channel?
Support us on Patreon at:
www.patreon.com/user?u=102761...
Or send us a SuperThanks through CZcams.
Not in a position to support financially? No worries! Your likes, comments, subscription & views all help.
Shoot straight & be well my friend. - Sport
I just ordered my pistol bundle after watching your very good videos.👍🇺🇸
Thanks to your video, I bought a Crosman 2240XL, and a DonnyFL Tanto which fits both my 2240XL and my Hatsan Flash Pup. Other than my Baikal IZH, my 2240 and now my new 2240XL are my favorite pellet pistols.
I cut 1/4 inch off my 2240XL hammer spring as I had done to my 2240. I only lost 15fps, and went from 35 shots/CO2 to 55 shots/CO2.
Thank you for the work you do to produce these videos. You do a great job, and I am sure your channel will be growing rapidly.
Fantastic! Thanks for sharing your experience. I have to admit I'm a bit jealous of your IZH, I really with I'd been smart enough to get one of those when they were available. Take care & happy shooting.
5 star rating sold me and I finally got my pistol with the HAWKE 3 MOA red dot has be placing dime size groups from 30 feet away.
Great reviews.
Sweet, how do you like the Hawke red dot. I'd like to try one.
@@AlsAirguns
The best RedDot I own right now. The 11 settings are all very crisp and the field of view is huge. Perfect sight for my range.
I found out that I like shooting at night in near full darkness with only the target lit up,my weapon light and the RedDot.
Brother, I am envious. 😎
Very nice review and test. I like the XL so much that I purchased a2nd one!. This is one heck of a great pistol. Happy plinking!
30 shots is good for me on one CO2. That is about the time it takes for one beer 🍺.😎
I use 2240 when I am lazy or can’t pump my 1322 which I prefer..It will give about 30 good shoots and can break Heineken glass bottle. I just have original version and it works for me,just iron sights..The whole line up of Crosman 1322/1377/2240 are great, I enjoy shooting them,it’s fun…
Are you of Croatian ancestry?
@@johnnybbgunner2136 Yes…
@@ilijabosnjak76
Me too.
Real name is Ivica Lucic.
I got my 2240 XL but I won't pay for the DonnyFL I will make one. However, I did receive the repeating 9 shot magazine from Airgun-Parts in the UK it works perfectly with this pistol. Thanks for the good video.
Cool. I want to try one of those magazines too.
Just received the regular 2240 and it hit hard at 15 yards it will go through tin can filled with water front to rear i wouldn't hesitate Taking squirrel at 20 yards🤓max and mine is accurate too👍
You've seen why the 2240 remains one of the top C)2 pistols out there Happy shooting & stay safe.
Indeed it will. And there is no better air pistol in the price range 2240's are available. Superbly accurate. Nothing wrong with the plastic breech for those who prefer irons.
Fun gun , good video Thanks
Best budget target n pest pistol out there
You’re right. I’m not aware of anything more accurate & powerful for the money, I’m planning a customization build on a new 2240xl that I’ve ordered. I’m thinking of doing a PCP conversion as a part of that build.
Thanks for the Video 📽️.
Liked and already subscribed 👍.
Cheers 🙏🇨🇦
Awesome, thank you!
Could we see another video on comparing sound of tanto on xl and off xl thanks Al 👍🏻
Coming soon!
Take the entire gun apart and have it Cerakoted flat black. Killer!
Actually, I've been playing with finishes, including hydro-dipping camo patterns like RealTree (tm). I want to try Cerikote and basic powder coating this year. But with time and budget being what they are probably not before next spring.
Would this be a good backpacker squirrel/pigeon hunter 10-20 yard's max just shooting up into pine trees
Absolutely!
I have similar videos on the 2240XL
@BigDawg76773, Awesome! 😎
what scope ya got ?
I was using a CenterPoint Red Dot.
How far could it kill a rabbit or squirrel stock in .22?
20 yards is realistic if your aim is good.
Howdy Al. It sounds to me like there is a bit of hammer bounce in the 2240. I hear a little brrraapp with the shots. So it’s losing shot count by opening the valve several times after the pellet is gone and simply venting CO2.
If you pop the breech off and video in slo-mo the hammer pin you can see it.
If you increase the hammer spring it will likely make it worse.
You are 100% correct regarding hammer bounce in the 2240 and similar CO2 pellet guns. Over the years there have been "de-bouncers" made on a limited basis. Many years ago I tried the one designed by SteveinNC. Unfortunately the one I had did not hold up. But you are absolutely right about what you're hearing.
@@AlsAirguns have you tried any captured spring devices so the hammer doesn’t end up suspended between the two springs?
No I have not had a chance to try anything like that.
@@AlsAirguns that’s something I plan to try in the future. If I have any luck with it I’ll post a video. Thanks for the input.
Have a great day and be safe out there!
Good luck! I look forward to hearing more about it.
If I wanted to put a longer barrel on how do I remove the moderator adapter
It's permanently attached to the barrel so you'll need a separate adapter for the longer barrel.
@@AlsAirguns normally they just use a grub screw or two to hold it onto the barrel I don't know why they would permanently attach it
@@Jb_outdooradventures It's being sold as a threaded barrel. Because of the thread size they needed to increase the barrel diameter. So they press fit he adapter on. Hopefully they'll offer it in additional barrel lengths as well. I actually prefer what they've done over a removable adapter which often introduces alignment issues.
@@Jb_outdooradventures if it’s press fit you MIGHT be able to apply heat to expand it while running water through the barrel to keep it from expanding as much. To install it on another barrel put the barrel in a freezer then heat the thread adapter and drop it onto the barrel. As it cools it will lock itself in place. It’s the same process as installing a starter ring gear on a flywheel.
If that’s more than you care to go through there are a few people selling them on eBay and I’ve seen a few shops selling them but at $40-ish dollars it’s a bit expensive.
Good luck. 🍀 🍀
Does a suppressor cut the noise enough to make buying one worth it ?
Absolutely! It doesn't come across in the recording but it makes the gun amazingly quiet. If quiet is important, the suppressor make a huge difference.
@@AlsAirguns Thanks Al , what suppression devices are the best for the money ? I’m looking forward to getting one .
If you have the threaded barrel like the 2240XL does and are in the USA, I'd say the DONNYFL Tanto or Sumo models. If you have a standard non-threaded barrel, you can use those but will need to order an adapter. With standard Crosman barrels I've had excellent luck with the TKO moderators. They are about half the price of the DonnyFLs but they are a semi-permanent addition and don/t move between guns or go on and off easily. They're also not built out of metal, so while they're less expensive they may be less durable. That said I've owned many and been extremely happy with them. Both companies are know of great service.
Any recommendation for the supressor?
People are having great results from the DonnyFL Tanto and Sumo models.
@@AlsAirguns Thanks. Unfortunately they are not legal in Canada
This or the diana air bug?
The Diana Airbug (CO2) is a really interesting repeater. It's based off a series of Chinese pistols who's name escapes me. But over all they seem to be well thought of. The Airbug can use Diana's 7 or 9 shot magazine (.22 or .177). Which is an advantage. Unfortunately, I've never shot or held one before. So I can't comment on accuracy or quality of construction. I suspect it's a pretty good pistol. That being said, I also believe the Crosman is probably better built in terms of materials, assembly and quality control.
What is the moderator you have on the gun?
DonnyFL Tanto Model is what I used.
Anyone try the Gamo polymag
I've shot the 16 grain Predator Polymags in it & they shoot very well. Haven't tried the Gamo's but assume the results would be similar.
Is this pistol available in the uk ?.
I’m guessing not yet. Crosman doesn’t even show it on their US website. It would also need to have the power reduced to be okay in Canada & UK (as I understand it.)
Thanks for the reply 👍🏼
my 2240xl is a DOG. I am only getting a good 18 shots before the dreaded thug sound. I can only shoot 20 yards where I am shooting. I can actually watch the pellet from barrel end to target
If it was shooting that way out of the box. Take it back or contact Crosman. Otherwise, when did it start shooting that way?
@@AlsAirguns Today, Just for something to do, I put a stock 10" 1.77 barrel & probe in it to see how it would shoot. It is like a high velocity laser beam now !! maybe 33 Good shots. I think I'll keep it in this config
Cool, I’m glad it worked out for you. 👍🏻