Arduino Robot Car | Obstacle Avoiding Robot Car 2WD with Ultrasonic sensor and L298N Module
Vložit
- čas přidán 26. 07. 2019
- #arduino_car, #arduino_robot, #obstacle_avoiding_robot
- Arduino Obstacle Avoiding Robot Car 2WD Kit:
1 x Car chassis
2 x Car Wheels
2 x DC Gear Motor
2 x 20 line code disk
4 x Fasteners (high intensity black acrylic)
1 x Caster
1 x Four battery box
1 x Quality Rocker Switch
1 x V5 shield
1 x UNO R3
1 x SG90
1 x FPV
1 x L298N
usa.banggood.com/2WD-Avoidanc...
- Wiring diagram and Arduino Sketch:
www.cs.columbia.edu/~sedwards/...
- Music:
JJD - Sugar High Listen to the track here -
open.spotify.com/track/0voHEI...
ALWAYS WITH YOU - COLBREAKZ & LOXIVE Listen to it on Spotify here:
open.spotify.com/track/7EkcZq...
APHRODITE - NEPTUNICA - Jak na to + styl
Cool bro....that ultrasonic sensor holder idea is smart🔥🔥
This is the correct code:
#include
Servo servo;
const int trigPin = 13;
const int echoPin = 12;
const int servoPin = 11;
const int enAPin = 6;
const int in1Pin = 7;
const int in2Pin = 5;
const int in3Pin = 4;
const int in4Pin = 2;
const int enBPin = 3;
enum Motor { LEFT, RIGHT };
void go(enum Motor m, int speed)
{
digitalWrite(m == LEFT ? in1Pin : in3Pin, speed > 0 ? HIGH : LOW);
digitalWrite(m == LEFT ? in2Pin : in4Pin, speed
does it work dude?
Thank you for sharing this code , it's working. Only this code help me , there's a lot of videos here in CZcams wasting my time to watch their code in description not work properly.
thank you
EXCELENTE LO FELICITO JOVEN
nice
can you put the codes of your obstacle avoidance robot please
Hy can you send me the diagram and sketch please cause your link not working
bro can you share the code for controlling the motors
Hey could you please give the code
good job
czcams.com/video/LSba-ByePao/video.html
What we need to do
Mera arduino project pura nahin Ho Pa raha hai yaar
Thodi bahut programming mein dikkat a rahi hai
This is really helpful vedio & I wan to try. I could find only instructions pdf but not Arduino Sketch. Could you please help me with sketch link please ?.
Nice one
How to upload the code bro
Please type the code
hey please send me the code
Y el codigo??
Code please
hello! first of all congradulations for this work,it's so good!!
please i want the code of obstacles avoiding car
Did u got it? I also need de code
uwu
Brrooooo..... Do kuch code diagram yrr...... ❤❤
Not open sketch
Bonjour, combien de temp j'ai cherché cette vidéo et maintenant je la trouver
code pls
hey! i wanna ask you cause i connected my arduino uno and this code didn't work
same
code please
please send me the code, greetings from germany
Yes, how to do the code pls
oh my god no need coding? just install wire only??
bhai conection ka photo bhejo
BROTHER YOUR CODE IS SHOWING ERROR PLZ HELP AND SEND CODE AGAIN
PLZ PZLPZLZPZLZPZLZ
Bhai mujhe aapse kuchh baat karna hai
Please send the codde
Please bhai
Actually, you could remove the brown sticker from the frame and you would be left with a transparent one.
ohhh thanks buddy
How is that any youtube video. I can't remove that
please reply
@@SALMANULFARISMM in the box I got the brown surface could be removed like a sticker. Maybe you got another version?
@@ancientgear7192 ok thank you
@@ancientgear7192 which Sensor sheild V5. To buy on amazon. Any link
coding baj sakta hay
😭😭😭Please I need the code very badly please give me the code
did u get it
@@birukindrias4096 No
le code ne marche pas
WHERES THE CODE
Please send me the code
And the code?
f krk
Please bhai help
Hi bro, can you send me the code of obstacles avoiding car
i can send
@@slinfinityprogrammer1000 can you send it to me too?
@@luislloydmahusay235 come to my channel .and come to FB from it
@@slinfinityprogrammer1000 can you kindly send the link instead? i already browse your FB and yt post, and i didn't see the coding of this project. thankyou
I need it too can u send the code here in the comments please?
Code
That is not a sufficiant clip that shows which wire goes where and how to customize the software that corresponds the hardware☹️
czcams.com/video/LSba-ByePao/video.html
czcams.com/video/LSba-ByePao/video.html
the code has errors!!!!!!!!!!
send it i will correct it
@@slinfinityprogrammer1000
here:
#include
Servo servo;
const int trigPin = 13;
const int echoPin = 12;
const int servoPin = 11;
const int enAPin = 6;
const int in1Pin = 7;
const int in2Pin = 5;
const int in3Pin = 4;
const int in4Pin = 2;
const int enBPin = 3;
enum Motor { LEFT, RIGHT };
void go( enum Motor m, int speed)
{
digitalWrite (m == LEFT ? in1Pin : in3Pin , speed > 0 ? HIGH : LOW );
digitalWrite (m == LEFT ? in2Pin : in4Pin , speed
@@slinfinityprogrammer1000 please help me correct it