Arduino Smart Robot Car from Banggood: PART1 Unboxing and Assembly
Vložit
- čas přidán 26. 08. 2024
- Today we gonna unbox and assemble the Arduino Smart Robot Car ordered from Banggood.com. It's very affordable to begin with.
Part1:Unboxing and Assembly: • Arduino Smart Robot Ca...
Part2: Electronic Connections: • Arduino Smart Robot Ca...
Part3: Hardware updates for the full code: • Arduino Smart Robot Ca...
How my robot took its own life!: • How my robot took its ...
If you like this video, please *SUBSCRIBE*
A lot of thanks to any advice and suggestions! :D
Links for parts:
Smart Robot Car Kit(New): www.banggood.c...
Smart Robot Car kit: www.banggood.c...
M3 *10mm Standoffs: www.banggood.c...
Amazon: amzn.to/2Auwbzq
Extra servo for pan and tilt camera mount: www.banggood.c...
Amazon: amzn.to/2jO7BBE
Speed encoder kit(Will cover in later video): www.banggood.c...
Amazon: amzn.to/2kq7H6J
Jumper cable for ultra sonic sensor: www.banggood.c...
Amazon: amzn.to/2koltGV
Let me know if you have any kit that need help with!
My Website: chenthedesignma...
My Instagram: / friedlc
My Dribbble: dribbble.com/c...
My Instructable: www.instructab...
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This help support the channel and allows us to continue to make videos like this. Thank you for the support!
Full tutorial is here: czcams.com/play/PLN9tittQZUlRJCdE17eORJ7ZGVhGnH77k.html
Where to buy this baseplate, plz help me...
What is amusing about this kit - mine arrived recently - is that the parts are the same but the base board holes and cutouts are different. When I look around at other build videos, everyone seems to have 'personalised' cutouts and drill holes! Nevertheless, I can still follow your basic build but will need to a little structural redesigning along the way...
Oh no... This seller is so bad at consistancy.... One trick i used is to locate the arduino board first, since it is asymmetrical. Then work the way out..
@@ChenTheDesignMaker That is a good idea to start from the Arduino and work out.
Seems people buy the kits from all kinds of places, Amazon, eBay and so on. I think there is some company in the depths of China that makes them and is having a bit of fun with us. Makes life a little more interesting :)
I got this and i am missing like half the parts you have
omg u tell so good
What changes between the new and the old version?
Cool. Looks bigger than I expected from the bangood pictures.
i feel it's too big already ;D. Definitely could go smaller with small components for the same functionality.
thx for the video, looking forward for next part
Here's the 2nd part czcams.com/video/BH33F-Hi_2M/video.html
Hey. It my first time on your page
I wanted to no if you can help me with a tutorial video on how to program two robots car to never collide..
It will mean alot if you can do this before this month
Hello. Is that possible to use python for coding this robot? Thank you
Good
Thank you!
I made this 3D printing part for the US sensor attachment to its base, so it is not done with a makeshift wire as shown in this excellent video.
Here is the Thingivers link to the design: www.thingiverse.com/thing:2765463/
Hi Uri, This is awesome! I'll print it out today and show it off in the 3rd tutorial!
Hi Uri, your part is featured in my latest video here: czcams.com/video/ms0C3o407oM/video.html Thanks again for your contribution!
what is the version of arduino board??
老王你好！I couldn't find any versioning on the board, just "UNO" written on it. Of course it is a cheap Chinese knock off, but works fine.
What is the board name sir?
I need this code please.
Great video! When you will upload the second part?
Thanks! I'm working on it right now, should be uploaded this week. Let me know if you have any questions so far.
ChenTheDesignMaker hi, the arduino code is loaded?
No it doesn't come with the kit, but I'll look for/create one for everybody in a later video. Stay tight!
bro we are waiting for your video
Sorry for the looong wait, I'm editing it actually right now!
PLEASE READ watch the first 1:45 of part two first because i had a BIG PROBLEM!!!!!!!!!!!
hi there, if upload the code I receive an error, and I cannot complete the car!
Hi Alex, could you provide more detail about the error?
Hi there! The problem was related to the chinese uno board! With a new driver evrything goes right! :-)
Alex Mele Awesome! Have fun with it!
At what point do you attach the wires to the motor?
Hi you should solder the wires before installing the motors. please check the part 2 of the video.
Thanks
What kind of wires are required for this project
Hi Omar, you just need the regular jumper cables,
links are here: www.banggood.com/40pcs-10cm-Female-To-Female-Jumper-Cable-Dupont-Wire-For-Arduino-p-994059.html?p=JH2514288496201309O3&cur_warehouse=CN or Amazon: amzn.to/2koltGV
Some basic soldering skills are also required.
Have fun!
I have an doubt
What is the use of it
sanjay sri It's mainly for education and learning. But the it could be programed to do more things like autonomous driving, self exploring etc.
pleaase i need some help for my school project .. at 08:32 when i fix it it doesn't turn i dont know why ?!!!!!!!!
Do you mean the servo is not turning? One thing we could try is to screw the servo arm on it and see if it turns in any directions.
@@ChenTheDesignMaker no it doesn't turn in any direction but should i try it manually or i have to wait until i apply the program??
@@salmasalmaa1 I usually do a manual test first. It shouldn't take a lot of force. If it still won't turn with a moderate of force, maybe should keep it safe and just try the servo code. If the code won't work, it might be a damaged servo...
@@ChenTheDesignMaker thank you for your answer .. and i have one more question if u don't mind : the servo code is in the link or no?? And if i try it and the problem still exist can i have the same results as you did with a damaged servo or should i buy an other one ???
when’s video coming?
I'm currently editing the video now, I hope it can be published this week! Sorry about the waiting...
ChenTheDesignMaker is the video finished and you just haven’t uploaded it or what?
I'm doing final touches right now. Promise it will be out tonight. Sorry for the wait...
Here's the 2nd part, sorry for the long wait! czcams.com/video/BH33F-Hi_2M/video.html
man, why the music?! .............
Hi, anything you don't like about the music?
The unnecessary 'music' in the background distracts from what you're saying and makes the video worthless.
So sorry about that...it was my first tutorial...I'll definitely make things better so stay tuned :D