Damn it, man. I wish you had this video up sooner. I had to learn how to change out from my black remote to the Clear shell and that thing is crazy putting it all back together
Yo he tenido que hacer lo mismo poner los originales. Muchas gracias por contestarme a mis preguntas ha sido un placer hablar con usted. Un saludo. Saludo
Having done this conversion myself successfully, only issue is Mikado will stop you using them after a short while you will end up with the Red Screen of Death and you will not be able to use your Vcontrol at all. So thanks for the video but you really should be warning people not to use, I understand this also happened to you, shame you left this video up, as these gimbals are not at all compliant and have not been properly tested which is why on powerup of the radio during the self test it will eventually stop working, you will get the RSOD. So what is the fix for the RED SCREEN OF DEATH ?
Ok muchas gracias por contestarme parece ser que en algunas emisoras detecta error eso me comentó Edward el de mikado Un saludo y muchas gracias por responderme amigo.
Hello Diego! How are these sticks working for you now? I bought the same ones and installed them on Vbc Evo and after a while they stopped working, a warning appeared on the screen that I was using non-original sticks, but when I moved them to the oldest Vbc, it worked perfectly with them. As I understand it, with the update Evo Mikado decided to ban the use of these stats. That's why I ask you to tell me how they work for you? Have you updated? Thanks for your help and have a nice day.
@chuckbirt9283 0 seconds ago I did the swap on gimbals following your video and my screen does not light up. The touch works just not the back light, any ideas? Is the screen light powered by the red/white wire?
Hi Diego Arce I just bought your radio master’s gimbal for Mikado, today I tried them but now I can’t control anymore my helicopter during the piroflip… any advice ? Is it maybe due to the settings ? Thank you in advice 😁🙏🏻
Hi there, i was curious to know if you or any one has had any issues with these gimbals in there mikado touch radios..? Ive heard a few people had there screen go red on them and rendered the radio faulty,, Is this at all true..? Thanks
Yup! I just “pre-ordered” them, turns out they were able to ship them out the same day! If you order from radiomaster for the first time, they give you a 5% coupon, mine were $143 shipped to the US
Hola amigo se rumorea q mikado está bloqueando las emisoras por aver puesto los stick de radio máster , usted sabe algo al respecto , espero su respuesta. Muchas gracias
Hola Luis En el último firmware update el radio está detectando que los gimbals son Hall sensor y da un error , en los próximos días ya lo van a arreglar
Damn it, man. I wish you had this video up sooner. I had to learn how to change out from my black remote to the Clear shell and that thing is crazy putting it all back together
Yo he tenido que hacer lo mismo poner los originales. Muchas gracias por contestarme a mis preguntas ha sido un placer hablar con usted. Un saludo. Saludo
Very good explanation 👍👍👍Bravo...I will make tomorrow
Thanks Diego, for the advice you gave me, now I'll try to do the calibration again after travel range.
Just installed... thanks for the clear tutorial Diego!!
Mucha gracias por la respuesta ahora ya sé cuál necesito el AG 01 v
I fly a Radiomaster tx16s MKll and the Ag01 gimbals are Amazing. You can get them in different colors anodized as well
If you have a laydown tx case set the radio in there face down when doing the work. Or Even a pillow or a thick towel
Having done this conversion myself successfully, only issue is Mikado will stop you using them after a short while you will end up with the Red Screen of Death and you will not be able to use your Vcontrol at all. So thanks for the video but you really should be warning people not to use, I understand this also happened to you, shame you left this video up, as these gimbals are not at all compliant and have not been properly tested which is why on powerup of the radio during the self test it will eventually stop working, you will get the RSOD.
So what is the fix for the RED SCREEN OF DEATH ?
Ok muchas gracias por contestarme parece ser que en algunas emisoras detecta error eso me comentó Edward el de mikado Un saludo y muchas gracias por responderme amigo.
De nada
Saludos
La solución es quitarlos y volar con los originales, según me contestaron de la fábrica Vbar
Hello Diego! How are these sticks working for you now? I bought the same ones and installed them on Vbc Evo and after a while they stopped working, a warning appeared on the screen that I was using non-original sticks, but when I moved them to the oldest Vbc, it worked perfectly with them. As I understand it, with the update Evo Mikado decided to ban the use of these stats. That's why I ask you to tell me how they work for you? Have you updated? Thanks for your help and have a nice day.
@chuckbirt9283
0 seconds ago
I did the swap on gimbals following your video and my screen does not light up. The touch works just not the back light, any ideas? Is the screen light powered by the red/white wire?
Great Video Diego! Are they really the best thing ever?
100% definitely worth it
Hi Diego Arce
I just bought your radio master’s gimbal for Mikado, today I tried them but now I can’t control anymore my helicopter during the piroflip… any advice ? Is it maybe due to the settings ? Thank you in advice 😁🙏🏻
Lower the travel and recalibrate the gimbals. Out of the box, they are set full travel
I had to lowered myself too
Pero tubo q cambiar y poner los originales o tiene puestos los de radiomaster , muchas gracias por responderme ,eres muy amable
Puse los originales
Hola me gusta , queda bien instalado?? Espero su respuesta muchas gracias un saludo
Hola
Si, queda perfecto
Esta diseñado para el vcontrol radio
Hi there, i was curious to know if you or any one has had any issues with these gimbals in there mikado touch radios..? Ive heard a few people had there screen go red on them and rendered the radio faulty,, Is this at all true..? Thanks
Yes , also happened to me
@Diego3dm so, did you report it to radiomaster and see if they were defective in any way.. or, if they made aware of this issue.. thanks
Hola otra vez y perdona por las molestias, es AG 01 cnc o AG 01 mini me puede confirmar cuál es por favor la referencia. Muchas gracias un saludo
El AG-01V es específico para el vcontrol.
El mini es para el zorro y tx12 , y el AG-01 es para el tx16s
Nice videos. Where can these be purchased?
www.radiomasterrc.com/products/ag01-v-cnc-metal-gimbals
Any supplier will have them and man they are worth the $139 for a set of these
Yup! I just “pre-ordered” them, turns out they were able to ship them out the same day! If you order from radiomaster for the first time, they give you a 5% coupon, mine were $143 shipped to the US
Hola amigo se rumorea q mikado está bloqueando las emisoras por aver puesto los stick de radio máster , usted sabe algo al respecto , espero su respuesta. Muchas gracias
Hola Luis
En el último firmware update el radio está detectando que los gimbals son Hall sensor y da un error , en los próximos días ya lo van a arreglar
Q solución hay la tuya es la evo ?? O la touch ???? La mía es la evo
Mikado me mando un patch, y lo arreglo
Yo tengo el evo
Hola amigo . Me da fallo con los gimbal de radiomaster , a usted le pasa lo mismo
Hola
Si, ami me pasonlo mismo, hasta ahora hay 6 casos
Same thing happened to me, they worked perfectly for just over 300 flights then i got the red screen.@@Diego3dm
Buenas , Ami me paso lo mismo , se ah bloqueado mi radio , saben la solución ?
Y si tienes la opción de haber comprado con PayPal, reclama que te devuelven el dinero y te quedas con los Gumball