How to make Powerful Electric Screwdriver
Vložit
- čas přidán 30. 10. 2019
- 配件表(Materials required)
050 Gear motor 3V160rpm 050减速马达 bit.ly/36pGNPU
Screwdriver Bendable Extended 螺丝刀延长软杆 bit.ly/2N3dZFe
Micro Switch 微动开关带柄 bit.ly/337qHbq
16340 Battery 锂电池 bit.ly/2WuhQOn
Charging Protection Board Module(type-C) 充电保护板 bit.ly/32u7pwy
PVC pipe PVC管 145mmX20mm
Thanks for watching! - Jak na to + styl
You were finally Great Invention!
BEST E-SCREWDRIVER DIY SO FAR
awesome craftsmanship...
Your ideas are always great like his one
good work . I really liked that H bridge with switches .
czcams.com/video/bZ-fLyMHVdc/video.html its micro screwdriver 👉czcams.com/video/bZ-fLyMHVdc/video.html
Excelente proyecto, felicitaciones por su trabajo, saludos desde Colombia, Suramérica.
czcams.com/video/bZ-fLyMHVdc/video.html 👈its micro screwdriver.
it's beautiful next led improvement
Another cool veryusefull project. 😊👍
Woow. Excellent project 👍
Excellent job!
awsome nice and so impressive your working manner
Awesome work, dude! Really fantastic! 😃
MC's Creations Nice🔓🔒🔒
Thank you..
Good Job and High Quality
This is nice! Ive made my own version too.. even though the video is not as good as this.
excellent working
Fantástico, muy interesante las vídeos
Браво! Беру за Пример! Спасибо Автору! )
OK, I really wanted to make this one but then I did some research for the parts required by this project, the most expensive part is the 050 motor + gear box , shipping included it costs 15$ or so, then there is only one seller sell this suitable motor gear combo (3V 160 rpm 050 motor ) , others are all N20 or N30, and voltage is 6V to 12V, and the RPM is not right. Other parts like bit shank and motor shank connectors , lion battery etc....it may costs another $15 or so....and connecting the bit holder and gearbox seems not easy they may not match depends on where you get your parts....then I also took a look at the cheapest power screw driver in aliexp it cost about $20.., better one costs $30-$60 (Wowstick SD should be a similar product, $50-$60, many screw bits included, with a long shank). so I gave up my plan of making it myself, and ....I'll keep using hand power screw driver.
you are correct thanks for posting this.
Yup. It's cheaper to buy one. You can get the one from Walmart for under 10 bucks and it comes with all the bits. Granted not as powerful but it works for small stuff. Other than that it's a good idea.
Nice comment :D it's kinda cool to make this thing, but then again as you said the good old hand version makes more sense if you use it sometimes and not like you screw at least 100 screws every day
same here bro
I Taobao to buy very cheap here as long as 30-40RMB will be able to buy all.
Literally the same one that the wowstick 1f is. Great for fixing the broken wow stick
good
Nice one thanks. Where did you find the extra long 4mm bits?
Super!!!
👍👍👍👍
(aze 🇦🇿 😎 )
Awesome videos bro keep it up :)
Cách đảo chiều motor, dùng 1công tắc 6 chân là đc
Wonderful👍
Deserves Subscription💓
czcams.com/video/bZ-fLyMHVdc/video.html its micro screwdriver
Excellent🤩
Wonderful
Hamare India ke screw bohot powerful hote h itni chotti se kuch ni hoga jada torque vali motor chaiye
Awesome 👍👍👍
Very good...
Excellent videos bro
really great,,, thank you for this awesome video😍😍😍
Ultra Tech 11234567859012345678910
czcams.com/video/bZ-fLyMHVdc/video.html
As I earlier told you are always with a new idea. great diy
Great job. I really like it.🙏👍🙏👍
Nice bro
Amazing
Good idea kj dot
Great
Great build however the superglue makes it permanent and not serviceable. I would have opted for hot glue in places where you might want to open up in the future. All in all it's a great idea. Already have the big one so maybe I might make a small one for my work bench or an adapter for my bigger driver.
don't worry - the superglue joint will fall apart by itself.
Nice
What about with the gear?
Good Luck
interesting version of TRY cordless screwdriver! Even interesting is the demo to open the screw: it turns CLOCKWISE to open !
No. Tell the min sec where this happens
Love from moon
Which is better, 050 gear dc or N20? What's the difference?
Nice music
自製無線電起子
簡單又實用!
居家維修好幫手!
你還在用手動起子嗎?
換一個吧!
無線電起子簡單又實用
小巧好攜帶!
充電時一條手機線+充電寶
或是旅充隨時隨地都可以充電
無線電起子簡單又實用!
谢谢支持😀
Super
I dont see how or where that motor came from ? IT was too quick,
0:26
What does this Chinese text in the corner mean?
I'm not Chinese
Is it some warning like "do this at your own risk"?
Can I build it without small fat hands ?
有多少n力?
Nise
nice
Kereeen
Nice build. I would have done the following differently.
Firstly, I would have used a 18650 4000 mAh with a 3V 50 rpm motor as I will want the longevity and power. Secondly, I would have used hot glue for the battery and the control-charging board as I may want to change the battery in the future. A tool like this is one i will want to keep for yrs as it will be repeatedly used. Taking some shrink-wrap and splitting it down the middle and covering the switches would have been a must for me as I would not want any liquids to get into it, even moisture.
Just my Two Cents xD
czcams.com/video/bZ-fLyMHVdc/video.html
i really need this, i swear i can make it. readymade price is too high for my budget😁
czcams.com/video/bZ-fLyMHVdc/video.html
Awesome
#BjElectrical
this tune sound familiar
How is that copper pin doing after 2 years?
Now How do I get all these machines at home? 😑 Anyway, nice content :) 👍
👍
Bossil wood has the same density as card board. I can thread screws in that with my bare fingers.... 👎
That's more or less what this would have to be replacing though, tiny screwdrivers using these tiny bits with maybe 3-5 nM necessary.
Can I use N20 motor for this project.
yes. it will change the torque vs speed..
Good idea! And LZ really need to buy a 3D printer to make things easier
Could you find this motor for me at another auction with such dimensions because from this auction I have to pay almost 5 $ with shipping
感觉不是很有力的样子啊,木板看起来也很软
用软板主要是展示一下,这个主要是用来拆卸像手机上那种的小螺丝,大螺丝不行,以后做一个动力大一些的
只需要跟着个人需求。把马达齿轮对比更改。这个马达很多不同齿轮对比。就可以了
@@nelson940519 是的
How much the gear-motor....(offline price)
👏👏👏👏👏
no problem if I use another voltage motor with that charge card
My poto
czcams.com/video/bZ-fLyMHVdc/video.html
How to make a Battery Level indicator, battery volt level indicator
गाइस अच्छी तरीके काम करता है वीडियो देख लो पर मैंने लिंक दी है
这个做出来,比差不多规格的成品要贵吧
但是同样规格的比较慢。这个快很多了。但是相对就比较低扭力。看个人需要。
Thanks for idea but why screw direction is revers
czcams.com/video/bZ-fLyMHVdc/video.html 👈its micro screwdriver. Nice project 👌
can i ask how you make the reverse?
Use two switch.
very Nice 👍👍✋✋
Nice
I want this, where can I purchase this product
Hola
Hello I'm from india
I have question does it work in car tyre lug nut opening ??
Seriously?
Has is got planetary gears 😁
That charger PCB gonna take hours to charge a decent 18650 lol
2.6 hours for a 2600mah battery
Than how to charge it very fast by 220v ac😂😂😂😂
Battery model 18650 not mah
こんにちは
Should sell to xiaomi
I want to buy this
What happened when we press both switch at the same time??????
Definitely, a short circuit
Nothing, in the default position the motor is connected to two negatives then it doesn't spin, if the two buttons are pressed the motor is connected to two positives so it also doesn't spins. No short circuit, at all, you can test the circuit replacing the power with a 1.5v battery and the motor with two leds connected in opposition.
Just use a DOUBLE POLE ROCKER SWITCH
Thank you very much,
I think there are something different between the circuit and the video. The correct is as you did in the video.
The diagram is not correct
Hope I help
Считай рычаги от микропереключателей уже отломались
Try in real wood, not balsa😉
nice but sound so annoying!
1st
Hi
Oh, so you post this _now_ . 🤦 Why couldn't you have posted this a week ago, _before_ I bought a Wowstick knock-off on eBay? ¬_¬
From which country ur belong to
😁😁😁💗💗💗
I from Rasha. No boites you
Cosori screwdriver
too much work for something that can be bought for $10
Not for me
Where I live is everything BLOODY EXPENSIVE
SO DIY IS MY WAY
Such a device in the country where I live is 60 dollars. (Xiaomi Wowstick pro). I did the same. The cost is only $ 6.
@@Fluflamer Such a device in the country where I live is 60 dollars. (Xiaomi Wowstick pro). I did the same. The cost is only $ 6.
Stop screwing around.
underrated
Thats not poverfull
go buy one so when you need it you dont have to go engineer it
Why was the first minute and a half of the video showing you screwing screws in and out of things? We already know what a screwdriver is.
A demo, that it works
झौ़़ओ🤣😭👍🧆👍