Upgraded to The Graphtec CE7000-60 | Unboxing and 1st Cuts
Vložit
- čas přidán 23. 08. 2024
- I finally Upgraded to The Graphtec CE7000-60, Watch me unbox it and test it out for the first time.
Graphtec CE7000-60
www.heattransf...
My Amazon Business Supply Store
Affiliate link (I do earn a small commission when you shop my favorite business products!)
www.amazon.com...
Creative Fabrica All Access for Designs, bundles, templates, fonts and more!
www.creativefa....
Ricoma Embroidery Machines
ricoma.com/US/...
Ricoma Heat Presses
shop.ricoma.com?referral=katrina-bacon
Heat Transfer Warehouse Link!
Sublimation blanks, HTV, printers and more!
www.heattransf...?aff=41
HPN Signature series 16x20 Heat Press, Tee Square It Ruler and Logo Pocket GRID and more! (Look Under Heating Supplies to find it! It comes up!
shareasale.com...
Trans Pro Plus Heat Press: www.proworldin...
Follow Me on Social Media: @Katrinas_gracefulcreations
I do earn a small commission through things purchased with my Affiliate links which help support
Thank you for the easy to follow video... I saw all the parts that came with my Graphtec today and panicked... this helped me so much
Yes- It's off the chain. I have a CE6000-60 and LOVE IT!
Still learning, and discovering tools and ideas. Thanks again for the tips and also for the laughs! 😀
You're very welcome
So excited to see this journey!! 😁 we hope you love itttt!!
Me too. Thank you. Have to master the contour cut next
That cutter is amazing!!! I love it!
Can’t wait to really dive into it.
My hat goes off to you...I'm very very proud of you and how far you've come and still going STRONG...may ALL your dreams come true and keep striving for the top 🙏🏾🙏🏾🙏🏾❤️❤️❤️👍🏾👍🏾👍🏾👊🏾👊🏾👊🏾💪🏾💪🏾💪🏾👌🏾👌🏾👌🏾
Thank you. Please do Graphtec tutorials and videos. I have had my Graphtec for over 1 year and not used it much as I cannot figure it out and how to use Corel really good. Congratulations!
Wow that's awesome cutting machine ❤️
I like that, I have to get me one, thank you for your video. Have a blessed day
Happy cutting and that is niiiice!
Katrina. You should not adjust your blade for different types of vinyl. Once you get it set then you adjust your force. If you need help I’m here to help. What I do is have two separate blade holders and only use the 45 degree for everything. One for thinner material and one for thicker material ie flock, magic flock, glitter, brick.
Thank you
You can do that or use the loupe it comes with and then adjust to the depth you need once you have your blade length dialed in for each material.. Either way is good.
@@garypolsinelli6033 thanks for the tip. Much appreciated!
You should use the 60 Degree blade for Flock, Magic Flock, Glitter and brick. I just use 60 Degree for everything lol.
@@elevated-apparel I have never use my 60 degree blade in the 4 years I have had mine.
I have the CE6000 60plus and thats how i started. You don't have to keep taking your blade out to adust there is a code sheet for the force on different materials.
Yeah I know about the force but the guy said if the material is really different then to make sure. That’s the guy who works at graphtec. I know I can just change the force but for the very first time I was just making sure I guess until I really learn the machine. Thanks for the tip.
YES!!
I'm here for it ALL!!
Yaaaassss!
HEY CBFF!! Love it! Awesome upgrade!!!
Hey boo! Me too. Just have to learn to work it.
You are going to loooovvvvveee it! Congrats!!!
I hope so. 😆
sigh, i almost got this. I ended up getting the gs-24 thats on the way. I hope gs-24 is as good. I have a larger 42inch vinyl express Q series/graphtec fc8000 but way too big for my studio
Congratulations ❤❤❤❤ on your new toy if the old ones start collecting dust ship one my way lol much success to you and your family
Thank you
I'm still very small potatoes when it comes to my business. This will be next when I scale up. Right now, I'm still working on hubby to finish my space.
Awesome take your time and work at your own pace.
You’re gonna need a brand new house for all these items that keep getting sent to you.
I know I already said that. Sheesh. Lol 😆
Wow...congrats...u ain't playing...God bless 🙏🏾🙏🏾🙏🏾🙏🏾🙏🏾
Not at all. Thanks
You should use the Loupe and write down the line its on and put it on the machine. also not all blades are the same Length. the same blade can be longer then the one you had in after you changed it. and you have to make sure cuz you will have to adjust it again. I have 4 blade holders for different material so I dont have to keep adjusting the blade for different material. like siser easyweed then using thermoflex material or using Flock and Rhinestone material.I also use cleancut blades and get about 2yrs on one blade. say goodbye to the cameo, juliet, etc lol. these machines are next level I have 3. Wait till you get use to the barcode scanner and conture cutting.
I know it’s a wrap after I really get used to it. I thought about getting more blades. Thanks for the tips. What software do you use with yours?
Glad you have a Graptec,, I had mine for a year and struggle with the software. I purchased Parallel so that I can run on my Macbook Pro. I have Graphtec Studio that came with it and it seems to be better but big learning curve for me. Can't wait to learn from you how to set up for print and cut.....
I know that’s the issue most people have is the software and learning curve. It’s definitely not a simple machine. More videos to come.
I hope Katrina is ok with me posting this. Watch this video for print and cut. Its the easiest one that covers it all. czcams.com/video/EQ69G7e7QKQ/video.html
It’s really not hard to learn at all. I use Coreldraw and Cut Master 4 CM4
@@katrinasgracefulcreations3711 How can I connect with you on assisting me on my new Ricoma embroidery
Congratulations good video thanks
Thanks for watching!
I have one and love it.
Awesome. What software do you use it with.
Hey, its great video, just one questing what printer are you using for print and cut function and to print stickers and HTV vinyl? I am not sure should i buy Epson ET8550 or Canon Pro 300? Thank you.
I've been looking into the machines now that you have it for 8 months. Can you please give me your your opinion I'm looking to do all sides, and it kind of shapes for business cards.
i have to cut out some numbers that are 6" tall but cant figure out how to do it. My office got this plotter the 130 model. first time using AI and this kind of machine
really nice you would be suprised how smal you can cut and detailted i have the ce7000 40 love it
In the video I showed the test cut which was really small and the small letter with the dots on the I which cut out perfectly
Hey Katrina my name is Melody and I just wanna say because of you my unboxing and assembly was great. But i need some help when printing my designs, my lettering is not cutting correctgly i dont know if its the outline or what. or if im not doing a text box if you have any input im just beginning and could use the assisstance
Hi can somebody help me? I purchased this same cutter and I was told it will work with Mac, I didnt know anything about illustrator or Corel draw, so I have to get that also?
I have the graphtec too. I love it!!
What camera are you using? That blur was niiiiice
Hey Katrina! You have the Star Craft Solo and the Graphtec CE7000-40. What are the pros and cons of each. I know the Graphtec is a lot more money but is the price difference worth the jump up for a crafter with a very small business?
Hi Katrina thanks for always providing your knowledge and raw experiences with us. 😊 but what kind of camera you using?
Lol. I’m using the Sony ZV1
im new to this.. considering cameo 4 as its affordable, but i dont know the cons compared to graphtec.. except that its slow.. how about the software, do we need silohete studio or does the cameo working with photoshop/corel draws.. anyone who can enlighten , would really appreciate that!
❤
I have a CE6000-60 if you can get this machine to run right it's nice other than that it's a big headache. Geek Squad is coming out to my print shop to see can they get my cutter back on line I'm using the new coreldraw suite 2021.
Hoping I don’t run into headaches
What do you mean by back online? Just curious because I have never heard this before.
I just purchased the new Corelle draw 2021 I cannot get it to work with the graphtec CE6000-60 Plus I'm getting a error message that says .... Cannot run corral macro: macro module not found.
... That's all I mean by saying offline cuz it's not working waiting for Best buy geek squad to come out in a couple days.
This is a professional cutter cameo is the parent company
What made you give up on the juliet?
I didn’t
Holy crap…this is $1900. My oh my. Too expensive for me. Guess I’m stuck with my cricut for now
It’s pricey…in a whole other league.
LOL WHAT CAMERA U USING?
The Sony ZV1. Awesome camera!
So technically it is a bigger Circuit machine
I will be showing it more. Definitely no cricut.
does this work on printmaster plus
Yes I believe so. I used illustrator with print master 4 I think it was
@@katrinasgracefulcreations3711 i was referring to the ms-dos software
The bummer is it only works with Adobe, or Corel Draw😒...other than that, I'm sure it's nice.
Definitely a bummer! Hopefully it changes in the future.
Price is very high
Lost me at adobe 😭
😂 😆 😂