How to Replace the Drill Chuck Dewalt Models DCD796, DCD791, and DCD790 by Removing a Screw-On Chuck
Vložit
- čas přidán 7. 09. 2024
- Need to replace the chuck on your Dewalt DCD796, DCD791, or DCD790 brushless drill driver? No worries! Our quick and straightforward video tutorial will guide you through the process step by step. Say goodbye to that old chuck with a simple screw-on mechanism. Grab your tools, follow along, and have your drill ready for action in no time. Don't let a stubborn chuck slow you down-watch our video now and get back to your DIY projects hassle-free!
Buy this product from Amazon:
🚀 You can get new chuck at amazon: amzn.to/3Q0uG4N
Join us as we shine a light on service lights, blinking lights, and maintenance tips for Hilti tools. 🚀 #Makita #cordlessdrill #electronicbrake #carbonsbrushreplacement #fixingdrills #DIYtools #power #drillrepair #diy #toolrepair #powertools #repair #toolrestoration #tools #dewalt #handyman #dewaltdrill #dewaltpowertools #dewalttools #dewalttough #dewaltrepair #dewaltfix #flexvolt
👍 Don't forget to like, share, and subscribe for more valuable content! Leave your comments below if you found this guide helpful: www.youtube.co...
✅ Stay Connected To Us.
👉 Instagram: / powertoolsrepairchannel
👉 Facebook: / powertoolsrepairyoutube
👉 Tiktok: www.tiktok.com...
=============================
✅ Recommended Playlists:
👉 Makita Repair:
/ watchv=p9my80wyope&lis...
👉 Devalt Repair:
• Ultimate Guide: Cleani...
✅ Other Videos You Might Be Interested In Watching:
👉 Dewalt Drill chuck replacement:
• Dewalt Drill chuck rep...
👉 How to change melted Makita 18V:
• Step-by-Step Guide: Re...
👉 Milwaukee M12 battery not charging repair:
• Milwaukee M12 Battery ...
👉 How to repair Bosch GWS 20 230:
• Bosch GWS 20 230 Big A...
================================
✅ About Power Tools Repair:
This is where the Power Tools Repair Intro begins!
Power Tools Repair is your ultimate destination for everything DIY and power tools! If you're a fan of Makita, Dewalt, Hilti, Bosch, Milwaukee, Hitachi, and more.
You've come to the right place. Our channel is a haven for tool enthusiasts, DIYers, and professionals alike, offering a treasure trove of content dedicated to the world of power tools, repairs, and restoration.
If you want to send your power tool for repair please contact via email.
✅ Email: powertoolsrepairchannel@gmail.com
🔔 Subscribe to the channel: www.youtube.co...
=================================
Disclaimer: We do not accept any liability for any loss or damage incurred by you acting or not acting as a result of watching any of our publications. You acknowledge that you use the information we provide at your own risk. Do your research.
Copyright Notice: This video and our CZcams channel contain dialogue, music, and images that are the property of the Power Tools Repair. You are authorized to share the video link and channel and embed this video in your website or others as long as a link back to our CZcams channel is provided.
© Power Tools Repair
SHORT AND EASY DIY VIDEO, THANK YOU!!!!
Thank you 👍
Good job I had to cut one off a Makita last week
I hate when I need to cut them
DCD 796 doesn’t have a central screw depends which type 1 & 10 doesn’t have one.
What about the newer model once with the rivet instead of that first counter clockwise screw how do u bust the rivet loose
Not seen any with rivet inside... What model it is?
There is no rivet on the new models, what you see is a step down that replaces the screw. But unfortunately the chuck is now torqued to a higher spec and you must remove the shaft otherwise you will damage the transmission.
@pdevonport7266 You are right 👍
What do you do when chuck screw is sheared of ,can’t unscrew
Drilling screw head or unscrewing chuck with lot of force and pullint screw head that way. Some times I disassemble gear assy and insert assy with chuck in vise to hold it strong
Don't worry about it the new models do not have a retaining screw. Just make sure the threads are dry with absolutely no oil or grease when you torque them up.