How To Replace Alternator 96-99 Chevy Suburban
Vložit
- čas přidán 26. 08. 2024
- Buy Now!
New Alternator from 1AAuto.com 1aau.to/ib/1AEA...
1A Auto shows you how to repair, install, fix, change or replace a broken or bad alternator in about 20 minutes. Only basic tools are needed. This video applies to trucks with the Vortech 5700 and other v8 engines. This video applies to the 96, 97, and 98 C and K series 1500 2500 and 3500 Silverado Pickup Truck, 1996-99 Suburban, Tahoe and Yukon plus 96, 97, 98, 99, 00, and 01 Express and Savanna.
This process should be similar on the following vehicles:
1992 Chevrolet C1500 Suburban
1993 Chevrolet C1500 Suburban
1994 Chevrolet C1500 Suburban
1995 Chevrolet C1500 Suburban
1996 Chevrolet C1500 Suburban
1997 Chevrolet C1500 Suburban
1998 Chevrolet C1500 Suburban
1999 Chevrolet C1500 Suburban
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/tatg/1A...
• 13mm Wrench 1aau.to/taZ/1AX...
• 15mm Wrench 1aau.to/taZ/1AX...
• 8mm Wrench 1aau.to/tcu/1AX...
• Ratchet 1aau.to/t6S/1AX...
• Rubber Mallet 1aau.to/tad/1AX...
Subscribe: / @1aauto
Check out our playlist:
Chevy Auto Repair Videos: • Chevy Auto Repair Videos
Chevy Suburban 1992-1999: • Chevy Suburban 1992-1999
For More Info visit us at 1aau.to/h/bfT/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
This is a extremely simple procedure for me and yet still before I headed out to get started I combed through your video to see what size wrenches to grab. Thanks for these videos. I have been watching them for probably close to a decade to keep my cars on the road. If I would buy my parts before they wore out I would get them from you guys.
Fantastic video. I canceled my appt at the mechanic after watching this and decided to try it on my own. The worst issue I had was getting the bolt holes lined up. 30 minutes later and I was done. Great service to the common man you provide.
Thank you so much for your video, it helped me change my fellas alternator. Very easy just like you showed. Although I would like to mention the nut which came with the new alternator was a 12mm, lucky we had a 12mm wrench with us! Thanks dude saved us time and money!!
There may be a loose wire or loose ground somewhere. Also check the switch and the fuses to see if they are okay.
Thanks so much! Just finished changing out my alternator. Only took about half hour thanks to your video.
If there's a check engine light on in the dash you may want to pull the code to see what could be causing the issue.
A no start is something that will be difficult to diagnose but I recommend bringing the truck to someone before you start throwing parts at a problem.
i'm mechanically inclined enough to get me around in little situations. i thought changing an altenator was more complicated than this. thank you so much for this video. keep them coming.
If it hasn't been tuned up in a while, you may want to start with a simple tune up.
I put the alternator in place and now I'm having a hard time putting the belt back on . What's the easiest way to do that ?
I had an alternator put in my 98 K3500 in Nov and it's been acting flaky...I paid over $260 for the whole deal. With your video I was able to put a new alternator in for just the price of the alternator, $130 and a little bit of time. Thanks.
PS, In the list of tools put 2 12 mm wrenches. Thanks again.
Thank you man!! Very STR8 forward
@18WheelTerrorist I'm not 100% sure. I'm not aware of or have seen anyone make this kind of a swap. You may want to check out an automotive forum for your vehicle to see if there's someone out there that has done this. They may be able to tell you exactly what you would need.
Awesome video. Just changed out the alternator on my 2003 Silverado. Instructions were perfect. Thanks!
@starbuary10 I will be doing this in the future. I have an 86 GMC Jimmy of my own that I am going to upgrade the heads, cam, intake and carb on but that won't be until later in 2010.
@sansonj72 Sometimes you have to wiggle the alternator around a bit as you turn the bolt.
Excellent video, thanks!!! You saved me a ton of time, I probably would've broken that stud had I not heard the need for 2 wrenches... Thanks!
Great video, walked me through the whole job. Had you right there in the garage. Many thanks.
awesome video, saved me some dough!
Thank you for listing the wrench/socket sizes off the top - so helpful!
What a great video!! Thanks a million!! Step by Step exactly as I needed to do on my Chevy Silverado 1500 with the Vortec V-8 motor.
Now if you would do a Replacing Power Steering Pump on the same motor I would be set. Many videos and instructions but not for my style assembly and no where as clear of instructions as you do. Again Thanks for the long distance help!!
THANK YOU>>>>once again you come through for me. ...helped my neighbor do this; and he bought me a nice set of jumper cables for the help!
Thanks for watching our videos. 1aauto.com 888-844-3393
Thanks!! This video helped out heaps. I changed my 99 Tahoe alternator with this vid.
Thank you for watching. Glad we could help. Please let us know how the repair comes out!
1aauto.com 888-844-3393
Thanks for taking the time to provide this tutorial. It's appreciated here.
Thank you for watching!
1aauto.com 888-844-3393
You may want to see if there is a stored code in the computer that may tell you what the issue is.
Thanks, we're trying!
Thank you for you video.
Thanks for the ratchet on tensioner tip! After failing with several other items I turned to YouTUbe and you.
Just replaced alternator, gauge reading high in orange and jerking when I try to pull off, could this be an bad alternator?
I just instaled a new alternator. As I was attaching the wire on the back of the alternator I had planned on using two wrenches just as you said, but noticed that the post sticking out of the back of the alternator was already loose. I turn it one turn clockwise to tighten it, but it just seemed to spin with a very light drag. Since I was unsure if there was a wire attached to the back of it inside the alternator, I stopped attempting to tighten it. I then attached the wire using two wrenches to tighten it to the stud, but the stud itself is still loose. What do you suggest? Is there an easy fix that does not violate the warranty, or do I just need to exchange it? The alternator is under warranty.
What a great video! This will save me some dough.
Great video!! Very helpful.
You may want to refer to your owners manual to see what they recommend.
What are the two wrench sizes
what rachet set did u use to relieve that tension pulley
Great information thank you very much.
Thanks for watching. Glad we could help 1aauto.com 866-403-3393
I didn't know where to direct the question regarding a possible electical problem at initial start up of my 1999 Suburban. Recently during a cold start, I turn my key ignition to the on position before starting. I usually wait a few seconds before starting up the engine. Immediately after starting, I smell a burning electrical smell through my interior blower vents for about 5 seconds and then it stops. The smell reminds me of a hot wire burning or hot electrical motor. The interior blower fan seems to be working fine. Would you have any clues on where to check in the interior or the engine compartment? Is this a common problem on older GM Trucks? I drove it for a while this last weekend and when the car is operating for some time, it doesn't smell when I shut the car off for 10 minutes and restart it again. Only when it's the first cold start after sitting for more then 5 hours..
You may want to check the plug end that plugs into the blower motor resistor and also the blower motor, to see if the connection is melted, or has been heated up and needs to be replaced. Hope this helps you out. 1aauto.com 888-844-3393
How do You align the bolts to the alternator - I have been trying and trying.
I have a 2003 Chevy Surburban. When I put it in drive, it tends to want to cut off. Could it be the alternator or something else? I put a new battery in.
I can't find ANY vids on '94 Silverado 4.3 alternator replacement. I need to replace the serpentine belt and the alternator. Why aren't there any vids for this engine and year????
Thank you for watching. Unfortunately we do not have a video for your application. We will keep this in mind for future videos.
1aauto.com 888-844-3393
*wow thanx ALOT*
It should be a 3/8 drive ratchet. Hope this helps you out. 1aauto.com 888-844-3393
This must be the next model up from the 1988 to 1998. My 1996 Silverado Z71's alternator isnt that far down into the motor, it sits on top.
my 92 chevy silverado 1500 has a problem when I put it in gear it will shut off I have put a new fuel pump on it and several sensors still doing the same please help me out
I have 1997 chevy suburban wont work on all light and start too!! I put new battery still wont work? point alternator?
Would going from a 105 amp alternator to a 140 amp cause any problems?
+Gary Johnston If may if the circuit is not made to handle that kind of a load.
Ja 96 to 01? Still riding down streets 2021 out here
+barrio kroniko Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
so apparently somehow missed the lesson about the 2 wrenches to remove the rear wire from the alternator, thats way i had to do it the hard way, well lesson learned
As I was attempting to pry the alternator out, the front ear broke off.
this only has one wire why
Ok...was able to follow, but the FOCUS sucked