Always wondered if i should measure temp with the heatgun actually not pointed on the vinyl. I think if you point the measure tool at the heatgun's blow it will throw out the numbers and it will not show how hot the actual surface of the vinyl is
I would use a 3M V-Cat roller for those indented channels. Using your fingers won't provide adequate pressure to activate adhesion for a quality install.
Chris Cork heat is used to soften vinyl so it stretches easier and also used to shrink back to original shape. When you use heat you have a greater chance of over stretching. The most important time is to post heat the entire car.
The heating of the vinyl is done wrong. Heat the vinyl en measure the temp when you are not blowing on it whit your heatgun. He’s measuring the warmth that his heatgun is blowing in the tutorial
Van Graphics present a smart choice in case you want to sell your business in a different and creative way. It’s such a challenge to keep the constant interest of regular clients and to draw the attention of the potential clients as well. But if you really do want to strike, you need to find an original way to secure your place in the front row. Also, you should be aware of the importance and power of the visual presentation. If your business relies on vans, think of the visual strategy and use your van to promote your business, brand, products or whatever your business implies. Contact Graphic Installation crew to install graphics on your van whether you want to cover one vehicle or the whole fleet. Graphic Installation is one of the U.S. leaders in providing top-notch installation services. If you need the best van graphics design installations, be free to address our professional team and contact us today. www.graphic-installation.com/graphic-application/vehicle-graphics/van-graphics/
Must have broke his heart taking off the vinyl after such a lovely job...
Tomorrow is my first day at work!!! (Printam)
So nervous and happy, thank you for all your help.
The Most comprehensive video i've seen so far!
Thanks very informative.Pete & Pauly check out this video.
Great tutorial. I'm going to wrap my car and this video is the most useful one I have found on youtube.
Thanks!
Amazing tutorial. Thank you for posting.
Fantastic job, well done !!
Always wondered if i should measure temp with the heatgun actually not pointed on the vinyl. I think if you point the measure tool at the heatgun's blow it will throw out the numbers and it will not show how hot the actual surface of the vinyl is
Very well done. I hope to learn this soon!
how was it ?
Grandes profesionales..
That was awesome to watch.
magnificent stuff!
I like the Bud Light spray bottle..haha.. nice tutorial.. thanks
great work, i like this
Great Job!
I would use a 3M V-Cat roller for those indented channels. Using your fingers won't provide adequate pressure to activate adhesion for a quality install.
just wrap your squeegee in a microfiber towel so it's thick but thinner than your finger and go over the area and save yourself some money.
well done! very useful VIDEO.
is it waterproof for alloys wrapping
really good.
Can you use a hair dryer?
Is heat used to shrink aswell as expand the film, depending on the temperature?
Chris Cork heat is used to soften vinyl so it stretches easier and also used to shrink back to original shape. When you use heat you have a greater chance of over stretching.
The most important time is to post heat the entire car.
taaa
nice work!
lg vinyl? no way!
Infrared lamp???try this 3 years later on this lg vinyl
bet that employee loved having to take the wrap off after he spent all that time onit hahah
Anyone know if this film can be used effectively to cover dark colored vehicles as well?
+Soylent Green yes, of course!
nice job... good you share...
Good one!
where can I get the book with all the cars in it
Look up impact outlines, you'll get a cd with all the vehicles in eps, ai, cdl etc and also a reference book
Thnak you for sharing.
thanks for video
Dental floss..... Great tip (to remove badges), don't know why I never thought of it
yes, it is the only way in some cases
wet application?
The heating of the vinyl is done wrong. Heat the vinyl en measure the temp when you are not blowing on it whit your heatgun. He’s measuring the warmth that his heatgun is blowing in the tutorial
Cool.
but it is not supposed that before rolling it must pass 24 hours because the ink still does not expel all the solvents
Látex ink cure instantly after print
In 12:59 min can see how badly vinyl looks. Very stretch in corner, lost color! :(
Edgars Kūla - this seems more part of the artwork being lighter in that region
Top man !!! But ripping it back off would have broken my heart 😭
yeah. i felt bad for Michael.
car paint protect use vinyl wrap!
my heart was broken when he wrapped off the car
it's-Latex :D
Van Graphics present a smart choice in case you want to sell your business in a different and creative way. It’s such a challenge to keep the constant interest of regular clients and to draw the attention of the potential clients as well. But if you really do want to strike, you need to find an original way to secure your place in the front row. Also, you should be aware of the importance and power of the visual presentation. If your business relies on vans, think of the visual strategy and use your van to promote your business, brand, products or whatever your business implies.
Contact Graphic Installation crew to install graphics on your van whether you want to cover one vehicle or the whole fleet. Graphic Installation is one of the U.S. leaders in providing top-notch installation services. If you need the best van graphics design installations, be free to address our professional team and contact us today.
www.graphic-installation.com/graphic-application/vehicle-graphics/van-graphics/
such a shame to wrap the nice work of just after it has been finished... :(
poor Michael had to destroy all his hard work for the ending of the video. :(