Knife FAIL Restoration [Too Much Rust]
Vložit
- čas přidán 22. 06. 2022
- This restoration ended before it really started. The old antique knife was just too much rusted, so I couldn't do anything at this point. In some places the old steel broke off and in other places the metal was already so thin that it could not have been used. In this restoration it was planned that the handle should be made of ebony and purple heart and the color on the blade should be extended, furthermore "Forgotten Shine Restoration" should be engraved with a laser.
------------------------------------------------------------
▶ What did I do ?! ◀
In this restoration video I can unfortunately not show many craft processes, only the derusting I show. After that I had to stop the project because the old knife was too damaged by rust. But you can see exactly the derusting and detailed my plan what I wanted to do with the knife.
------------------------------------------------------------
▶ Good to know ◀
I used the following tools: Rust remover, screwdriver, wire brush, sandblasting cabin, abrasive corundum.
------------------------------------------------------------
▶ Special thanks to my channel members! ◀
-
------------------------------------------------------------
▶ Do you want to support me? ◀
Do you want to become a channel member? Then you can do it here:
/ @forgottenshinerestora...
You like what you saw and you want to help the channel to develop? If you want to support me, you can donate via Paypal:
www.paypal.com/donate?hosted_...
------------------------------------------------------------
▶ Did you like it? ◀
Did you like the video? Then like, subscribe and share it, please!
Thanks a lot! - Věda a technologie
![Rare Double Cleaver [Black Blade With Kingwood Handle]](http://i.ytimg.com/vi/mFusXojhLjQ/mqdefault.jpg)
![Rusty Electric Stove Restoration [Camping Hotplate]](http://i.ytimg.com/vi/fPHFZNe19M0/mqdefault.jpg)
Please tell me you sent the poor old knife to an “Old Knives’ Home”, where he could tell his war stories to discarded butter knives… 🥺
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
Yes the knife arrived there well and has already moved into its room. I could also observe that it has made first friends. Simply great! 🐢
Thank you! This is what I needed to hear! 😅
no he got shattered to pieces and burn ed alive!! !! mw haha haw!!
I love this small thread here, thank you three
I think Mr. Turtle knew from the beginning that it was a lost cause.
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
I'm also starting to think that turtle knows more than all of us?! Why didn't she tell me right away...? 🤔🐢
@@ForgottenShineRestoration Please give her my apologies . . . I called her "Mr."
🤣🤣
Love it! It's just reality that things go wrong 🤷🏻♀️ still very satisfying and interesting 😌 would love to see just EVERY project of yours whether it goes wrong or turns out beautiful 👏🏻
Thank you for your great comment! 🐢
Poor little knife. It was very honorable of you to try and save it, but sometimes you just can't do anything more ❤️ I appreciate your efforts, and I think Turtle's heart is a little broken. We gotta get him a new knife project to lift his spirits! ❤️
That's right... turtle has been really sad, but turtle is already better, because we are already soon about the next project...🤩👍🐢
@@ForgottenShineRestoration yay! 😍😍
Sad that the knife was too far gone but it wasn't a failure. I would watch every one of your videos, they are always informative. I love turtle!
Thank you very much! 🤗🐢
🐢
I find it interesting that not only do we see the fail of restoring the knife but we get to see the plan you were having for it. Eventhough it didn't go according to plan, I enjoyed watching the video ✨️
🤩👍🐢
Love your vids, even these short ones! I’d be interested to see more of these where the object is too far gone.
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
Thank you very much! 🐢
Same!
These videos are so bingwatchable, also gives me actually alot of inspiration to also learn and perform these kinds of restorations. Very unique and understandable to newbies, thanks
Thank you for your great comment! 🐢
Too bad it didn’t work! Loved the idea though, hopefully you can do that with another knife :)
Hello dear friends, visit my channel, I teach welding
Thank you very much! Yes somehow I owe it to you to carry out my plan on another knife.... 🤔🐢
@@ForgottenShineRestoration haha you don’t owe me or anyone else anything! (Well maybe you owe turtle something, he does a lot of work for you). Until now I’ve loved every video, short/Iong. As long as you’re happy making it I’ll be happy watching it :)
At least you've tried everything you can and planned it very carefully but in the end learning from your failures can be helpful for your success you did your best F.S.R. 👍👍👍
Hello dear friends, visit my channel, I teach welding
Thank you for your great comment! 🐢🤩
Badly experience is necessary experience too)
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
Thats right! Thank you very much! 🤩🐢
Loved the little turtle face! 😂🙏🏼
Hello dear friends, visit my channel, I teach welding
🤣👍🐢
I’ve binge watched all of your videos please keep them coming I love them
Thank you very much! 🐢
It would’ve been so pretty I hope u find another so u can carry out the idea 🥺🥺
I hope you'll be able to find a different knife to complete this type of restoration on, it sounds like it would have been extremely beautiful!
Thank you! 😊 🐢
Don't give up, make a semi-automatic. Yes, it will take a lot, but try to make a lot. This is what we want to see, this is the whole magic of restoration.
Manchmal müssen auch die Besten passen. Mach weiter so.
Ich freue mich schon auf das Messer, dass den beschriebenen Anstrich bekommt. ❤
Also mach weiter so gute Arbeit. Nicht mit Passen 😂
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
Vielen Dank! Ja irgendwie bin ich es euch schuldig meinen Plan an einem anderen Messer durchzuführen... 🤔🐢
@@ForgottenShineRestoration ich frage mich wie alt das Messer ist?🤔
Put it in a simple wooden frame. It would make a great piece of artwork
I find it really intersting to see when the restoration is impossible.
I really love this channel ❤️
Thank you very much! 🐢 🥰
U are the best ❤️❤️❤️❤️❤️❤️❤️❤️❤️
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
Thank you very much! 🤩🐢
Не бросай, навари Полуавтоматом. Да много придётся очень много, но попробуй наварить. Это и хотим увидеть , в этом вся магия реставрации. Давай, попробуй.👍👍👍👍🛠🔧🙂
Perfect restoration project good 🌟❤
Thank you, bro! 🐢
2023년에 더욱 더 건강 하시고 많은 행운이 있기를 바랍니다. 멀리 대한민국 🇰🇷 에서 당신을 응원 합니다 👍👍👍👏👏👏💟💚👋👋👋
매우 감사합니다! 내년에도 잘 부탁드립니다! 🥳🐢
@@ForgottenShineRestoration 😊👏👏👍👍💟💚👋👋👋
Hiii , I love tour vídeos
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
Thank you very much! 🐢🤩
i saw your most video and you're already MASTERPIECE Sir!
keep it up!^^
🤗🥰🐢 Thank you very much!
Woww, the best!
خیلی باحال درست میکنی وسایلو
I'm just gonna throw it out there, were you thinking that trying to build it up with weld would burn it up? 'Cause that'd be the only other thing you coulda done. I really like seeing the fails, it shows that sometimes, in spite of your best efforts, it don't go your way. Thanks for the video.
Thank you, too! 🐢🤩👍
Honestly that thing looks like its all rust, I'm amazed you even managed to get any of it off without having it turn to dust
That's right, in the meantime I had the same thoughts....🐢
could a knife this far gone be melted down and made into a smaller knife maybe?
I knew you were going to eat it!
Can't blame you for noping out of this restoration. As badly gone as that knife is, it might be easier to just reforge it into a new knife made of old metal.
The rust runs deep in this one 😂
😅🐢
wow that knife look like something you pick up shipwreck :)
i love it just the way it is. love to mount it on that purple-red wood and hang it in my kitchen. :) 🔪✨
Well, the plan sounds really good, and the kids hope turtle brush feels better.
Turtle is fortunately doing well again.... 🐢
I'm sad to hear the news you probably did not have the tools or techniques like welding to give it a better life but I'm glad you tried 😢(love the turtle edit)
За старания и черепашку лайк ♥️🤗
Дякую за чудовий коментар! 🐢
Delicious!
and crunchy 😅🐢
Ah ha! Would be fun to slip this into an archeological dig somewhere and let it be “rediscovered “ 😂
😱🤣🤣🤣🐢I imagine it kinda funny too
@@ForgottenShineRestoration it sure would. They’d get all excited !!
Im pretty sure this is a central european "bauernwehr" knife. Its from around the 15th c and the best thing you can do is leave it as is.
Yeah, sometimes it could be fail...
Because you're not a fake restore tuber!
Thank you very much! 🐢
Entscheidung ist vollkommen okay, was nicht geht, geht nicht. Freue mich aufs nächste Video.
Vielen Dank für dein tolles Kommentar! 🐢
I am curious what actually happens to the items that can't be restored? Can they be melted down into something else? Turned into eclectic art pieces?
I also don't know what I'm going to do with the old knife yet....🐢
They could always be sacrificial scrap metal for electrolysis
Yeah, sometimes a project can be a bust. If you ever need a tool to do a restore on I have an old leather punching?canvas punching tool? It's been in the family for well over a century now and could use a restore.
Matkapa bağlı tel zımpara ile sürtsen rahat başarırsın.
I love how no one is talking about how cursed 3:01 is. Great video regardless.
Yeah repairing this wouldn't be much different from just making a new knife
ok fine this is too gone! :D
Still restored, just more of a damage over time kinda weapon
New sub ! Liked 😛🐸🙂
Thank you very much! Welcome on board.🐢
The knife doesn't have to stay the same size or shape. Remove the thinnest parts and make a small blade.
Du hast es zumindest versucht 🤷🏻♀️ Dein Plan wird sich sicherlich wann anders verwirklichen lassen 👍
Vielen lieben Dank! Ja das kann ich mir auch vorstellen 😅🐢
You could collect some unsalvagable knives and then make damascus out of them (or make a collab with blacksmith to make damascus), and after that make a knife out of that damascus.
Forging again from failed restoration
You should have made a new one 😅
Please, go for the black and purple in another project!
Ok, i will do that 😎👍🐢
Your design would have been spectacular, and I'm sorry the knife was in such rough shape.
Thank you very much! 🐢
Can old metal like that be melted and forged into something new?
I think so... 🐢
It was a good try
Hmmm, maybe try electrolysis next time? That would leave more metal I think. Oh well.
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
No, that would not have left more metal. The loss during sandblasting is not very high... 🐢
@@ForgottenShineRestoration Maybe reforging? At least the metal should be usable to make a new knife? (although that might be beyond the scope of restoration)
I think you could make a steak knife out of that, and you can fill the pits by spot welding I think. But maybe I got the wrong idea.
I don't think the knife can be repaired because it is very worn and rusty. Therefore, the decision to fail the restoration process is correct and in place
Ещё походит)
Noooo 😟😞😔😥
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
😪😪🐢
I also do restoration on my channel they are very simple but well done, congratulations on your beautiful work!
Eu também faço restauração no meu canal são muito simples mas bem feitas, parabéns pelo seu belo trabalho!
Rip that poor knife
Some things are just too far gone.
can you clean the rusty nails?
Porque ganó River
Poor little knife
Oh je. Kann passieren. Manchmal findet man unter Rost eine wundervolle Patina, vor allem bei Messern, andererseits nur Schrott. Nicht verzagen, weitermachen ! Nagle das Ding an die Wand zur Erinnerung und auf zu neuen Projekten ! Kann nur besser werden !
Vielen Dank für das tolle Feedback! 🤩👍🐢
4:08 Thing (from Addams Family) wearing a glove 🫳🏼
🤣🤣🤣🐢
@@ForgottenShineRestoration Why did you put the Tortoise emoji?
Hey you,
We want a successful restoration
Don't be late
We are wating⏳⌚👍🇩🇿👍
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
Tool just too far gone to restore? Just explain what was the plan for it and make a funny but short video. Definitely a good one
I've seen a video before where they took a discount store knife and upgraded it. Maybe don't let the design go to waste, find the cheapest knife you can and give it a makeover.
mmh good idea 🤔🐢
Oh well.
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
Lamentablemente ahora eso es basura ya 😥
Oh, demasiado óxido
Oh sí... 🐢
Auch eine Bauernwehr. 😔
i like the camera shots from inside the machines. it reminds me of good eats. have you seen that show? i think youd like it （ ・∀・）
Bruh this knife is mud
It's rust all the way down.
You are definitely right! 🐢
Это был ниндзя-нож. Если им пырнуть врага в спину, то враг скончается в страшных муках от зазубрин и ржавчины.
Черепашка-ниндзя не даст соврать.
😅😅🐢
p͓̽r͓̽o͓̽m͓̽o͓̽s͓̽m͓̽ 👍
More rust than a knife
Thats true! 😅🐢
You should try to reforge it and make it something usable, poor
Old knife😢
You really did a video about this? Now what, 1 more mount until the next one????
İlk
Hello dear friend, you are invited to visit my channel. I teach welding. Thank you
😕🔪
Send me that I restored 😅
Wow, I think I got tetanus by just looking at that.
Fant🤢🙏👎
Unfortunately the rust had already destroyed the knife... so he couldn't destroy it during his "restoration".
bad
😡
No