How to enter hidden menu in BMW X3 (E83) instrument cluster hidden menu
Vložit
- čas přidán 23. 08. 2024
- How to enter hidden menu in BMW X3 (E83) instrument cluster hidden menu
vrcustoms.net
1 Car Engine and cluster data
1.0 46nnn Chassis nr/VIN serial number (last 5 digits)
1.1 4nnn K-number
1.2 690236 Cluster Part #
1.3 045210 Coding (04)/diagnosis (52)/bus index (10)
1.4 1200 Week (12)/year of manufacture (2000)
1.5 09_160 Hardware (09) and software # (16.0) of cluster
1.6 Not used
1.7 04__44 CAN-version (04) KI-revision index (44)
2 (test) Cluster System Test - Activates the gauge drivers,
indicators and LEDs to confirm function
3 SI Data
3.0 1098 Used fuel in liters since last SI (Service Inspection)
3.1 0231 Periodic inspection days; elapsed days (since last SI)
4 Momentary Consumption
4.0 0145+ Instant fuel consumption - 0145=14.5 liters/100km
4.1 0018 Instant fuel consumption - 0018=1.8 l/Hour
5 Distance Gone Consumption
5.0 082 Average mileage; 082=8.2 liters/100km
5.1 0536 Calc. km to refuel (momentary distance to go)
6 Fuel Level sensor inputs in liters
6.0 109330+ Fuel level averaged; Left half sensor input=10.9 liters; Right sensor input=33.0 liters
6.1 0439+ Total tank level averaged; vlgs 6.0: 10.9+33.0=43.9 liters
6.2 0442+ Indicated value (44.2) and tank phase
7 Temperature and Speed
7.0 021+ Coolant/Engine temperature (2.1C)
7.1 130 Ambient/Outside temperature - chg met 5 pts. 125/130/135
7.2 + Engine speed / Current RPMs 1/min
7.3 + Vehicle speed / Current Speed in km/hour
8 Input value in HEX form
8.0 1d0+ System voltage ADC-Value Hex code
8.1 26C33C+ ADC Values HG left/HG right
8.2 0000 ADC Value brake degradation sensor (000=o.k.)
8.3 18C ADC Value outside temperature
9 Battery
9.0 140 Battery Voltage - 140 = UB 14.0v
9.1 242013+?
9.2 074_78+?
9.3 0011+?
10 Not used
11 Not used
12 Not used
13 GonG Gong Test
14 Not used
15 Status cluster I/O-ports (bit codes) 0=low; 1=high
1st-belt contact, seat belt fastened=0; 2) ignition lock contact, key inserted=0; 3) door contact, door open=0; 4) clock button pressed=0; 5) SI reset=0, for reset=0; 6) EGS transmission failure=0
Status Digital Outputs (bits) 0=inactive, 1=active
1) Gong output; 2) Brake warning lamp; 3) Low fuel warning lamp; 4) EGA lamp; 5) seat belt lamp; 6) manipulation dot
16 Not used
17 Not used
18 Not used
19 Lock Status; unlocks functions in range 3-18
19.0 L-On/L-Off Unlock: press button when "L-Off"
20 Not used
21 Software Reset; reset OBC settings
00 End of test
I'm helping my friend work on his 2005 BMW X3. Unfortunately he baught the car with around 200000 miles on it and the previous owner, it seems, sold it just in time. It's one problem after another.
Nice .... do you think i can change the mpg to fuel / 100 miles (km in my case)
Are these read only values or can they be changed? Looking to see if seat belt chime can be turned off.
Manual transmission, nice..
I have a 2005 bmw X3 the radiator fan does work by way on scan tool. But it will not come on while driving. I've replaced the coolant temp sensor 2 which sits on the left side of the radiator, the fan still doesn't come on. I'll be replacing the other coolant sensor today hopefully some luck with the fan
it should be a thermo switch on a radiator or some fuse and wiring. Short 2 wires on a radiator and see if it comes on
@@vrcustoms7 I'm sure the fan works just not on its own. I need to use a snap on scan tool to manually turn the fan on.
@@vrcustoms7 I unplugged the fan for 2 seconds plugged it back in and it came on but it didn't stay on
I had the same issues. Fixed steps: Took the fan out, unscrewed cover, lubricated thoroughly with D40, make sure the fan can move freely both direction; Unplug the electric connections related to the Fan, including the Resistor's, clean the E connectors thoroughly with electric connector cleaner. Fan's function back to normal, though a little bit noisy when it runs.
@@JG-gf9ho thanks, but it was the thermostat. It's been running since early may no issues
Toda esta información tenía que ser en español
what menu is the speed limit warning cause i can't find it in the manual
did u find out ?
Mine changes from test to
7304 1.1
When I press the button it changes number to 1.2, 1.3 and so on?
The gage on my instrument panel always seems to run a little hot. I would say at least 1/8 over. Does this test run seperate from the mechanical gage on the instrument panel?
Thanks- good video.
you have complete instrument test somewhere in that menu
Kamal
Quick question, which option/code will allow you to check the transmission fuel levels?
I dont think that you can check that in that menu if i remember correct. I think you will need inpa
Hi. As I can change in the board of Miles to kilometros.Thanks.
Can you do a tutorial? Thank you
My speedometers on the left cluster the pin is not moving. How can I fix that? I can’t even see how fast I am going.
It is one of the wheels speedsensors, I thing they are back one for speedometer.
VR Customs is there a code to fix it?
@@pupppypwrjr yes replace the faulty sensor 😀 scan it.with tool 😀
VR Customs
Thank you for your help.
Could also be bad abs computer
What can I use to save gas
stage 1 tune up so the cars potential can be used a little better then but lighten your foot take some lead out ya boots 😂
Tengo un x3, 2006 y se me prendió el testigo del aceite rojo a Q puede ser debido esto
Ya le toca su mantenimiento
is it possible to activate DRL?
No, you will need NCS expert.
What mode do I use to save gas
sell bmw :D
🤣🤣🤣🤣 I wanna know too.
@@AdaHairCreative I wanna know ur number mi lady
can I change from mile to km ??
no, that is not possible, i think you will need to use coding tool, like ncs expert or others
Where it says_ _ 072 is that the temp of the coolant? Is it in Celsius?
Yes in celsius
@@vrcustoms7 what in test 7.1? Why I have 60-100C
How reset abs??
Only with diagnostic tool
☔️
Wtf
Kamal